CVI318LWX2 - Wine cellar SMEG - Free user manual and instructions
Find the device manual for free CVI318LWX2 SMEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wine Cellar |
| Brand | Smeg |
| Model | CVI318LWX2 |
| Capacity | 18 bottles |
| Net Weight | 30 kg |
| Dimensions (HxWxD) | 820 x 595 x 570 mm |
| Power Supply | 220-240 V, 50/60 Hz |
| Energy Class | D |
| Annual Energy Consumption | 150 kWh/year |
| Temperature Range | +5°C to +20°C (adjustable) |
| Noise Level | 42 dB(A) |
| Cooling System | Compressor |
| Defrost | Manual |
| Interior Lighting | LED |
| Shelves | 4 removable wooden shelves |
| Door Reversibility | Yes |
| Climate Class | N/ST |
| Color | White |
| Installation | Freestanding |
| Warranty | 2 years |
Frequently Asked Questions - CVI318LWX2 SMEG
How to set the temperature on my Smeg wine cellar?
Use the thermostat dial inside the unit. Turn it clockwise to lower the temperature and counterclockwise to raise it. The recommended setting for red wine is 12-18°C, for white wine 8-12°C, and for sparkling 6-8°C.
What is the recommended temperature for storing red wine?
Red wine is best stored between 12°C and 18°C. For long-term aging, aim for a constant 12-14°C to preserve flavor and aroma.
How often should I defrost my wine cellar?
Defrost when the ice layer on the evaporator reaches 3-5 mm thickness. Typically, manual defrosting every 6-12 months is sufficient. Remove all bottles and unplug the unit, then let the ice melt naturally.
Can I install the Smeg CVI318LWX2 in a built-in cabinet?
This model is designed for freestanding installation. For proper ventilation, leave at least 10 cm clearance on the sides and back. It is not suitable for built-in use unless specifically stated.
Why is my wine cellar making loud noise?
Normal operational sounds include the compressor and fan. If the noise is excessive, check if the unit is level, the back panel is not touching the wall, or if items inside are vibrating. A noise level of 42 dB is typical.
How to clean the interior of the wine cellar?
Unplug the unit and remove all bottles. Use a soft cloth dampened with warm water and mild detergent. Wipe all surfaces and dry thoroughly. Avoid abrasive cleaners or sharp objects.
What is the energy consumption of this wine cellar?
The Smeg CVI318LWX2 has an annual energy consumption of 150 kWh, based on standard test conditions. Energy class is D. Actual consumption depends on ambient temperature and door openings.
How many bottles can the Smeg CVI318LWX2 hold?
It holds up to 18 standard 0.75L wine bottles on its 4 wooden shelves. Large or irregularly shaped bottles may reduce capacity.
Can I reverse the door opening direction?
Yes, the door is reversible. Follow the instructions in the manual to change the hinge side. You will need a screwdriver and possibly an assistant.
What does an error code E1 mean on the display?
Error code E1 indicates a temperature sensor failure. Unplug the unit for 10 minutes and plug it back in. If the code persists, contact customer support for a replacement sensor.
User questions about CVI318LWX2 SMEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wine cellar in PDF format for free! Find your manual CVI318LWX2 - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CVI318LWX2 by SMEG.
USER MANUAL CVI318LWX2 SMEG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SMEG
Model : CVI318LWX2
Category : Wine cellar