WG311v2 - Wi-Fi Access Point NETGEAR - Free user manual and instructions
Find the device manual for free WG311v2 NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless PCI Adapter |
| Model | WG311v2 |
| Brand | NETGEAR |
| Dimensions (W x D x H) | 120 x 80 x 22 mm |
| Weight | 100 g |
| Power Supply | 3.3V DC from PCI slot |
| Wireless Standards | 802.11b/g |
| Maximum Data Rate | 54 Mbps |
| Frequency Band | 2.4 GHz |
| Security | WEP 64/128-bit, WPA-PSK, MAC address filtering |
| Antenna Type | External detachable |
| Interface | PCI 32-bit |
| Operating Systems Supported | Windows 2000, Windows XP |
| LED Indicators | Power, Link/Activity |
| Temperature Range | 0°C to 40°C (operating) |
| Humidity | 10% to 90% (non-condensing) |
| Warranty | 1 year limited |
| Maintenance | Wipe with a dry, soft cloth; avoid liquids |
| Repair / Spare Parts | Not user-serviceable; replace unit if defective |
| Package Contents | Adapter, antenna, CD with drivers, quick install guide |
Frequently Asked Questions - WG311v2 NETGEAR
How do I install the NETGEAR WG311v2 adapter?
Turn off your computer, insert the card into an available PCI slot, secure it, and close the case. Power on and install the drivers from the provided CD. Then configure your wireless network settings through the NETGEAR utility or Windows.
What security protocols does the WG311v2 support?
It supports WEP (64/128-bit) and WPA-PSK. It also allows MAC address filtering for additional security.
Can I use this adapter with Windows 10?
Officially, it supports Windows 2000 and XP. It may work on newer systems with compatibility mode or third-party drivers, but NETGEAR does not provide drivers for Windows 10.
What is the maximum range of the WG311v2?
Indoor range is typically up to 50 meters (164 ft) and outdoor up to 200 meters (656 ft), depending on obstacles.
How do I reset the adapter to factory settings?
The WG311v2 does not have a reset button. To reset settings, uninstall the software and drivers, then reinstall from the CD or latest download.
Does the WG311v2 support WPA2?
No, it only supports WPA and WEP. WPA2 is not supported due to hardware limitations.
What should I do if the adapter is not detected?
Ensure the card is firmly seated in the PCI slot. Check if the slot is enabled in BIOS. Try a different slot. Reinstall the drivers. If still not detected, the card may be defective.
Can I use an external antenna with this adapter?
Yes, the antenna is detachable via an RP-SMA connector, allowing you to upgrade to a higher gain antenna for better range.
How do I configure the WG311v2 as an access point?
The WG311v2 is a client adapter, not an access point. It cannot function as an access point; it connects your computer to a wireless network.
Is the WG311v2 compatible with 802.11n routers?
It is compatible with 802.11b/g networks. It will connect to 802.11n routers but only at 54 Mbps (b/g mode).
User questions about WG311v2 NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wi-Fi Access Point in PDF format for free! Find your manual WG311v2 - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WG311v2 by NETGEAR.
USER MANUAL WG311v2 NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : WG311v2
Category : Wi-Fi Access Point