microSAMPLER - Synthesizer KORG - Free user manual and instructions
Find the device manual for free microSAMPLER KORG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Sampling Synthesizer |
| Dimensions (W x D x H) | 278 x 176 x 66 mm |
| Weight | 1.2 kg |
| Power Supply | 6 x AA batteries or AC adapter (9V DC) |
| Battery Life | Approximately 6 hours (alkaline) |
| Sampling | 16-bit/44.1 kHz, up to 4 samples at once |
| Polyphony | 8 voices |
| Effects | Multi-effects: reverb, delay, chorus, filter, etc. |
| Sequencer | 16-step pattern sequencer with real-time recording |
| Storage | Internal memory (approx. 30 seconds sample time) microSD card slot for expansion |
| Connectivity | Audio input (1/8"), audio output (1/8"), MIDI In/Out, USB (Midi) |
| Keyboard | Multipad capacitive touch-sensitive pads (16) |
| Display | 2-line OLED display |
| Main Features | Sampling, synthesis, step sequencing, motion sequencing, touch pads, microphone built-in |
| Care & Cleaning | Wipe with a soft, dry cloth. Do not use solvents or abrasive cleaners. |
| Safety Precautions | Keep away from water, heat sources, and magnetic fields. Do not disassemble. |
| Spare Parts & Repairability | Contact Korg authorized service centers for spare parts and repairs. |
| General Information | Manufactured by Korg Inc., Japan. Supplied with user manual and AC adapter. |
Frequently Asked Questions - microSAMPLER KORG
How do I sample an external sound?
Connect an audio source to the AUDIO IN jack, press the SAMPLE button, then press a pad to start recording. Press the pad again to stop.
Can I use a microSD card for more storage?
Yes, insert a microSD card (up to 32GB) into the slot on the side. The device can load and save samples to the card.
How do I save my sampled sounds?
Press the WRITE button, select a pad number, and choose Save. The sample will be stored in internal memory or microSD card.
What power source does it use?
It can be powered by 6 AA batteries (recommended alkaline) or an optional AC adapter (9V DC, center positive). Battery life is approx. 6 hours.
How do I connect the microSAMPLER to a computer?
Use a USB cable (type B) to connect to your computer. It supports USB MIDI for sequencing and data transfer.
Can I layer multiple samples on one pad?
Yes, you can create a Multi-Sample by assigning different samples to different velocity ranges or using the Layer function.
How do I use the built-in microphone?
Press the MIC button to activate the internal microphone. Then press a pad and speak or sing into the device to sample.
What effects are available?
The microSAMPLER includes effects like Reverb, Delay, Chorus, Phaser, and Filter. You can assign them per pad.
How do I reset the device to factory settings?
Hold down the FUNCTION button and press POWER to enter reset mode. Select Factory Reset and confirm. This erases all user data.
Why is the device not turning on?
Check that batteries are inserted correctly or the AC adapter is connected. If using batteries, replace them. Ensure the power switch is set to ON.
User questions about microSAMPLER KORG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Synthesizer in PDF format for free! Find your manual microSAMPLER - KORG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. microSAMPLER by KORG.
USER MANUAL microSAMPLER KORG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KORG
Model : microSAMPLER
Category : Synthesizer