Sarix IXE10LW - Surveillance Camera Pelco - Free user manual and instructions
Find the device manual for free Sarix IXE10LW Pelco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Surveillance Camera |
| Brand | Pelco |
| Model | Sarix IXE10LW |
| Resolution | 5 Megapixels (2592 x 1944) |
| Lens Type | Fixed, 3.6mm |
| Night Vision | IR LEDs, range up to 30 m |
| Day/Night Function | Yes, with ICR filter |
| Video Compression | H.264, H.265, MJPEG |
| Network Connectivity | 10/100 Ethernet, PoE (802.3af) |
| Power Supply | PoE or 12 VDC, 6 W max |
| Dimensions (D x H) | 130 mm x 105 mm |
| Weight | 0.7 kg |
| Housing Material | Metal with polycarbonate dome |
| Ingress Protection | IP66 |
| Operating Temperature | -40°C to 50°C |
| Storage Temperature | -40°C to 60°C |
| Motion Detection | Yes, with configurable zones |
| Privacy Masking | Yes, up to 4 regions |
| Audio Support | Built-in microphone (optional line in/out) |
| Alarm I/O | 1 input / 1 output |
| Maintenance | Clean dome with soft, dry cloth; avoid solvents |
| Spare Parts | Contact Pelco for replacement dome or bracket |
| Repairability | Limited; unit is sealed; authorized service required |
Frequently Asked Questions - Sarix IXE10LW Pelco
How do I reset the camera to factory defaults?
Press and hold the Reset button on the camera for 10 seconds using a paperclip. The camera will reboot with factory settings.
What is the default IP address of the camera?
The default IP address is 192.168.1.20. Use the Pelco IP Finder tool to locate it on your network.
Can the camera be used outdoors?
Yes, the IXE10LW has an IP66 rating, making it suitable for outdoor use in rain or dust.
How do I connect the camera to Wi-Fi?
This model supports only wired Ethernet or PoE. No Wi-Fi option is available.
What is the maximum resolution supported?
The camera supports up to 5 MP (2592 x 1944) at 30 fps.
How to view the camera remotely?
Use a web browser to access the camera's IP address or configure it in compatible VMS software like Pelco VideoXpert.
What type of power supply is needed?
The camera can be powered via PoE (IEEE 802.3af) or a 12 VDC adapter (sold separately). Maximum power consumption is 6 W.
How do I clean the camera lens?
Use a soft, lint-free cloth slightly dampened with water to gently wipe the dome. Avoid abrasive cleaners.
Does the camera support audio?
Yes, it has a built-in microphone and supports external audio via line in/out (optional cable).
What should I do if the camera goes offline?
Check Ethernet cable connections, verify PoE switch power, and use the Pelco IP Finder to see if the camera responds to ping.
User questions about Sarix IXE10LW Pelco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual Sarix IXE10LW - Pelco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Sarix IXE10LW by Pelco.
USER MANUAL Sarix IXE10LW Pelco
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pelco
Model : Sarix IXE10LW
Category : Surveillance Camera