RC-8iR - Controller Kramer - Free user manual and instructions
Find the device manual for free RC-8iR Kramer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Infrared Controller |
| Brand | Kramer |
| Model | RC-8iR |
| Dimensions (W x H x D) | Approx. 20 cm x 10 cm x 3 cm |
| Weight | Approx. 0.3 kg |
| Power Supply | 2 x AAA batteries (not included) |
| Control Type | Infrared (IR) |
| Number of Buttons | 8 programmable buttons |
| Compatible Devices | Kramer switchers, matrixes, and other IR-controlled equipment |
| Range | Up to 10 meters (line of sight) |
| LED Indicator | Yes, for transmission confirmation |
| Material | ABS plastic |
| Color | Black |
| Programming | Via learning mode or pre-programmed codes |
| Maintenance | Wipe with a dry, soft cloth; avoid liquids |
| Safety Instructions | Do not expose to water or excessive heat; replace batteries with correct polarity |
| Spare Parts | Not applicable; if damaged, replace the unit |
| Reparability | Not user-serviceable; contact Kramer support |
| Operating Temperature | 0°C to 40°C |
| Certifications | CE, FCC |
Frequently Asked Questions - RC-8iR Kramer
How do I program the RC-8iR controller?
To program the RC-8iR, press and hold the SETUP button until the LED blinks. Then press the button you want to program, aim the original remote at the RC-8iR's IR receiver, and press the corresponding key on the original remote. The LED will blink twice to confirm. Repeat for other buttons.
Which devices are compatible with the Kramer RC-8iR?
The RC-8iR is compatible with any Kramer IR-controlled device such as switchers, matrixes, and scalers. It can also learn codes from other IR remotes, making it compatible with many third-party devices.
What type of batteries does the RC-8iR use?
The RC-8iR uses two AAA batteries (not included). Replace them when the LED dims or the range decreases.
How do I reset the RC-8iR to factory settings?
To reset, remove the batteries, press and hold any button for 10 seconds, then reinsert the batteries. The controller will clear all learned codes.
What is the range of the IR signal?
The effective range is up to 10 meters (33 feet) in a straight line with no obstructions. Ensure a clear line of sight to the device's IR sensor.
Can I control multiple devices with one RC-8iR?
Yes, the RC-8iR can store multiple IR codes for different devices on different buttons. You can assign each button to a different function or device.
How do I clean the RC-8iR controller?
Clean the surface with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners.
Why is the LED not blinking when I press a button?
Check if the batteries are inserted correctly and have sufficient charge. If the LED still doesn't blink, try resetting the controller or replacing the batteries.
Can I use the RC-8iR with non-Kramer devices?
Yes, the RC-8iR has a learning function that can capture IR signals from other remotes. Simply follow the programming steps using the original remote.
Where can I find the user manual for the RC-8iR?
The user manual is available for download on the Kramer website or on notice-facile.com in PDF format. You can also request a translated version by email.
User questions about RC-8iR Kramer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual RC-8iR - Kramer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RC-8iR by Kramer.
USER MANUAL RC-8iR Kramer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Kramer
Model : RC-8iR
Category : Controller