ZF2300 - 3D Glasses OPTOMA - Free user manual and instructions
Find the device manual for free ZF2300 OPTOMA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Active Shutter 3D Glasses |
| Compatibility | DLP-Link enabled projectors (Optoma, etc.) |
| 3D Technology | DLP-Link (DMD chip sync) |
| Frame Material | Lightweight polymer |
| Lens Material | UV-protected polycarbonate |
| Weight | Approx. 30 g (with battery) |
| Dimensions (W x H x D) | 170 x 40 x 10 mm (folded) |
| Power Source | CR2032 lithium coin cell (3V) |
| Battery Life | Approx. 100 hours of continuous use |
| Battery Replacement | User-replaceable via side compartment |
| Operating Range | Up to 10 m from projector |
| Sync Method | Infrared (IR) from projector |
| Refresh Rate | Up to 144 Hz (flicker-free) |
| Field of View | Wide angle suitable for large screens |
| Cleaning & Care | Wipe lenses with microfiber cloth; avoid solvents |
| Storage | Keep in protective case when not in use |
| Safety Compliance | CE, RoHS, FCC |
| Spare Parts Availability | Temple arms, nose pads, battery cover |
| Repairability | Battery and pads user-replaceable; frame not modular |
| Included Accessories | Cleaning cloth, storage pouch, CR2032 battery |
| Color Options | Black (standard) |
| Warranty | 1 year limited |
Frequently Asked Questions - ZF2300 OPTOMA
Are the Optoma ZF2300 glasses compatible with all 3D projectors?
They are designed for DLP-Link compatible projectors, primarily Optoma models but also many other brands using DLP-Link technology. Check your projector's manual for DLP-Link support.
How do I replace the battery in the ZF2300 glasses?
Locate the small compartment on the right temple arm, slide open the cover, remove the old CR2032 battery, and insert a new one with the positive (+) side facing up. Close the cover securely.
How long does the battery last and what type of battery is used?
The glasses use a single CR2032 lithium coin cell (3V). Battery life is approximately 100 hours of continuous use. Actual duration may vary based on usage and ambient temperature.
Can I wear these glasses over prescription eyeglasses?
Yes, the ZF2300 glasses are designed with a roomy frame that comfortably fits over most prescription eyeglasses. The lightweight build minimizes pressure.
How do I clean the lenses without scratching them?
Use the included microfiber cloth or a lens cleaning wipe. Gently wipe in circular motions. Avoid using paper towels, rough fabrics, or chemical solvents, as they can damage the anti-reflective coating.
What should I do if the glasses don't sync with the projector?
First, ensure the projector is set to DLP-Link mode and the glasses are turned on (the sync indicator blinks). Move closer to the projector and avoid direct sunlight/strong IR interference. Replace the battery if it's low.
Are the glasses rechargeable or do they require a disposable battery?
They use a standard CR2032 disposable coin cell battery. They are not rechargeable. You can purchase replacement batteries at most electronics stores.
What is the operating range of the ZF2300 glasses?
The glasses can sync with a DLP-Link projector from up to 10 meters (33 feet) away under normal indoor lighting conditions. Walls and obstacles may reduce range.
Can I use these glasses with a computer monitor or TV?
Only if the monitor/TV supports DLP-Link 3D and has an IR emitter. Most consumer 3D TVs use different technologies (e.g., Bluetooth or RF), so compatibility is limited to DLP projection systems.
Where can I find spare parts like nose pads or temple arms?
Spare parts can be ordered from Optoma authorized service centers or online retailers. Contact Optoma support for specific part numbers and availability. Some generic frame accessories may also fit.
User questions about ZF2300 OPTOMA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your 3D Glasses in PDF format for free! Find your manual ZF2300 - OPTOMA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZF2300 by OPTOMA.
USER MANUAL ZF2300 OPTOMA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : OPTOMA
Model : ZF2300
Category : 3D Glasses