Road Thunder Extreme RTX658 - Loudspeaker MTX Audio - Free user manual and instructions

Product Type	Car Speaker
Brand	MTX Audio
Model	Road Thunder Extreme RTX658
Size	6.5 inches
Type	2-Way Coaxial
Power Handling (RMS)	100 Watts
Peak Power Handling	300 Watts
Impedance	4 Ohms
Sensitivity	92 dB
Frequency Response	40 Hz - 20 kHz
Mounting Depth	2.5 inches
Weight per Speaker	1.5 lbs
Woofer Cone Material	Polypropylene
Tweeter Type	PEI Dome
Grille Included	Yes
Installation	In-car, standard 6.5" cutout
Maintenance	Clean with a dry, soft cloth
Safety	Avoid exposure to moisture and excessive heat

Frequently Asked Questions - Road Thunder Extreme RTX658 MTX Audio

What is the power handling of the MTX Road Thunder Extreme RTX658?

The speaker handles 100 watts RMS and 300 watts peak power.

What is the impedance of the RTX658?

The impedance is 4 ohms, compatible with most car amplifiers.

What is the size of the RTX658 speaker?

It is a 6.5-inch speaker, fitting standard 6.5-inch cutouts in cars.

Is it a coaxial or component speaker?

It is a 2-way coaxial speaker with an integrated tweeter.

What is the frequency response of the RTX658?

It reproduces frequencies from 40 Hz to 20 kHz.

Does it come with a grille?

Yes, the speaker includes a protective grille.

Can I use these speakers with a factory stereo?

Yes, the 4-ohm impedance works with most factory and aftermarket stereos, but an amplifier is recommended for best performance.

What is the mounting depth of the RTX658?

The mounting depth is 2.5 inches, suitable for many doors and rear decks.

How do I clean the speakers?

Clean gently with a dry, soft cloth. Avoid water or harsh chemicals.

Are these speakers weather-resistant?

No, they are designed for indoor car use and should not be exposed to water or extreme humidity.

USER MANUAL Road Thunder Extreme RTX658 MTX Audio

ROAD THUNDER e extreme

RTX658

Fs: 148.7 Hz

Qms: 8.298

Cms: 0.133 mm/N

Mms: 8.588 g

Rms: 0.967 kg/s

Vas: 0.118 ft ³ (3.327 liters)

Xmax: 0.012 in (.295 mm)

D: 5.11 in (129.80 mm)

Sd: 20.57 in² (132.73 cm²)

Vd: .239 in ³ (0.004 liters)

Qes: 1.272

Re: 5.97 Ω

Le: 0.326 mH

BI: 6.14 Tm

Qts: 1.103

η₀ : 0.827%

Peak Power: 300 W

SPL: 94.0 dB

Freq Response (-3dB): 136Hz - 6.5kHz

Recommended Crossover Freq: 500Hz High Pass

Mitek Mobile Limited Warranty

Our Guarantee

Mitek Mobile products (including MTX, Streetwires, Coustic and Magnum) purchased in the USA after 1/1/2013 from an authorized Mitek retailer are guaranteed to be free from material defects in products and workmanship for five (5) years to the original end user purchaser, subject to the terms and conditions below.

Length of Limited Warranty and Remedy

The warranty period begins the day the product is purchased by the end user, and is limited to the original retail purchaser of the product.

Free Replacement Period (2 Years)

Products found to be defective in materials or workmanship during the first 2 years will be, at Mitek's option, repaired or replaced by Mitek at no charge. When a product is replaced during first 2 years, the warranty does not renew, it continues on from the original date of purchase.

Proration Period (Years 3-5)

The prorated purchase price of any product which becomes defective after the first two years and prior to the end of the warranty period may be credited toward the purchase of a new Mitek product. The amount of the proration shall be determined by dividing the purchase price by the number of months of the warranty period (60), and then multiplying the result by the number of months remaining in the warranty period. Any partial months will be rounded to the nearest whole month. For example, a product purchased 37 months ago for \100 would be calculated by dividing \100 by 60 months = \1.66/month, multiplied by 23 (the months remaining in the warranty period) for a prorated warranty amount of \38.33.

You are responsible for all costs for removal, reinstallation and proper packaging, shipping, insurance or other freight charges incurred in the shipment of the product or part to Mitek. Mitek will ship the repaired or replaced Mitek product or replacement parts to you at no charge. Mitek reserves the right to utilize reconditioned, refurbished, repaired or remanufactured products or parts in the warranty repair or replacement process. Such products and parts will be comparable in function and performance to an original product or part and warranted for the remainder of the original warranty period.

What Is Not Covered

This warranty does not cover the product if it has been subject to neglect, abuse, misuse, incorrect connection, or if it has been subject to unauthorized repair or alterations of any nature, or if the serial number has been altered or removed, and the warranty does not extend to cosmetics or finish. This warranty only applies to products installed and used in the USA.

What You Must Do to Obtain Warranty Service

You must contact Mitek Warranty via our website at MTX.com, or via email at [e-mail], or by calling 800-556-2888. If you did not purchase the product directly from Mitek, a proof of purchase must be provided in order to receive warranty consideration. You will be issued a Return Authorization (RA) number which must be written on the outside of the package before returning the product to Mitek.

No Other Warranties

THE LIMITED WARRANTIES DESCRIBED ABOVE ARE EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED. MITEK DISCLAIMS AND EXCLUDES ALL OTHER EXPRESS WARRANTIES, AND DISCLAIMS AND EXCLUDES ALL WARRANTIES IMPLIED BY LAW, INCLUDING WITHOUT LIMITATION THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT THAT APPLICABLE LAW PROHIBITS THE EXCLUSION OF IMPLIED WARRANTIES, THE DURATION OF ANY APPLICABLE IMPLIED WARRANTY IS LIMITED TO THE PERIOD SPECIFIED FOR THE EXPRESS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Any oral or written description of any Mitek product is for the sole purpose of identifying it and shall not be construed as an express warranty.

Limitation of Liability

MITEK'S OBLIGATION TO PROVIDE A CREDIT, OR REPAIR OR REPLACE AT MITEK'S OPTION, SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY AND MITEK'S SOLE AND EXCLUSIVE OBLIGATION. MITEK SHALL NOT BE LIABLE FOR INCIDENTAL, INDIRECT, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE MITEK PRODUCT, ITS USE OR PERFORMANCE. Incidental damages include, but are not limited to, such damages as loss of time and loss of use. Consequential damages include, but are not limited to, the cost of repairing or replacing other property which was damaged if the Mitek product does not work properly.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This limited warranty supersedes all prior warranties and is not transferable from the original consumer purchaser.

Any assistance Mitek provides to or procures for you outside the terms, limitations or exclusions of this limited warranty will not constitute a waiver of such terms, limitations or exclusions, nor will such assistance extend or revive the warranty. Mitek will not reimburse you for any expenses incurred by you in repairing or replacing any defective product, except for those incurred with Mitek's prior written permission.