WX502MK2/OB - Speaker Audac - Free user manual and instructions
Find the device manual for free WX502MK2/OB Audac in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive Speaker |
| Model | WX502MK2/OB |
| Brand | Audac |
| Driver Configuration | 2-way (5.25" woofer + 1" tweeter) |
| Frequency Response | 55 Hz - 20 kHz |
| Impedance | 8 Ohms |
| Power Handling (RMS) | 100 Watts |
| Peak Power Handling | 200 Watts |
| Sensitivity | 90 dB (1W/1m) |
| Enclosure Type | Open Baffle (OB) Design |
| Dimensions (H x W x D) | 310 x 200 x 260 mm |
| Weight | 4.5 kg each |
| Recommended Amplifier Power | 20 - 150 Watts |
| Connectors | Gold-plated binding posts |
| Grille | Removable fabric grille |
| Finishes | Black or white matte |
| Installation | Shelf, stand, or wall-mount (brackets included) |
| Cleaning | Wipe with dry or slightly damp cloth |
| Safety | Complies with CE, RoHS |
| Spare Parts | Available via Audac service network |
Frequently Asked Questions - WX502MK2/OB Audac
How do I connect the WX502MK2/OB speaker to an amplifier?
Use the gold-plated binding posts on the rear panel. Ensure the amplifier is turned off, then connect speaker wire (positive to positive, negative to negative). Recommended wire gauge: 14-16 AWG.
What is the recommended placement for optimal sound?
Place the speakers at ear level, at least 30 cm from walls. Due to the open baffle design, they benefit from some rear space to allow bass reflection. Angle them slightly towards the listening position.
Can I use these speakers with a subwoofer?
Yes. For a full-range system, connect the speakers to your amplifier's main output and use a subwoofer with a crossover set around 80 Hz. The speaker's frequency response extends down to 55 Hz, but a subwoofer enhances low bass.
How do I clean the speaker grille and cabinet?
For the grille, use a soft brush or vacuum with a low suction setting. The cabinet can be wiped with a dry or slightly damp cloth. Do not use abrasive cleaners or solvents.
What amplifier power is suitable for the WX502MK2/OB?
An amplifier delivering 20 to 150 Watts RMS per channel is ideal. The speaker handles 100 Watts RMS (200 peak) and has 90 dB sensitivity, so moderate power is sufficient for most rooms.
Are there any specific safety precautions I should follow?
Keep speakers away from moisture, heat sources, and direct sunlight. Ensure stable placement to prevent tipping. Do not exceed the maximum power handling. Disconnect during cleaning.
What is the warranty period for Audac speakers?
Audac typically offers a 2-year warranty from the date of purchase against manufacturing defects. Register your product on the Audac website to validate coverage.
Can I bi-wire or bi-amp these speakers?
The WX502MK2/OB has a single pair of binding posts, so bi-wiring or bi-amping is not supported without modification. Use standard single-wire connection.
How do I replace a damaged driver?
Contact Audac customer service or an authorized dealer for spare parts. Remove the grille and unscrew the driver from the front. Disconnect the wires and replace with the exact model.
Does the open baffle design affect bass response?
Yes, open baffle speakers typically have less deep bass compared to sealed or ported enclosures. However, they offer a more open, natural soundstage. For deeper bass, consider adding a subwoofer.
User questions about WX502MK2/OB Audac
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual WX502MK2/OB - Audac and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WX502MK2/OB by Audac.
USER MANUAL WX502MK2/OB Audac
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Audac
Model : WX502MK2/OB
Category : Speaker