HR2823 - Juicer PHILIPS - Free user manual and instructions

Product Type	Juicer
Brand	Philips
Model	HR2823
Dimensions (H x W x D)	Approx. 400 x 200 x 300 mm
Weight	Approx. 3 kg
Power Consumption	600 W
Voltage	220-240 V
Frequency	50-60 Hz
Juice Capacity	1.5 L
Pulp Container Capacity	2 L
Feeding Tube Diameter	75 mm
Speed Settings	2 speeds
Pulp Separation	Automatic
Dishwasher Safe Parts	Yes (except motor base)
Non-Slip Feet	Yes
Overload Protection	Yes
Cooling System	Integrated fan
Material	Plastic body, stainless steel blade
Release Features	Easy lock and release system
Accessories Included	Juice jug, pulp container, cleaning brush

Frequently Asked Questions - HR2823 PHILIPS

How do I assemble the Philips HR2823 juicer?

Place the motor base on a flat surface. Attach the pulp container, then insert the filter basket. Lock the lid and place the juice jug under the spout. Ensure all parts click into place before use.

Can I juice whole fruits without cutting?

No, cut fruits and vegetables into pieces that fit easily into the feeding tube (75 mm). Remove large pits and hard seeds to prevent damage.

How do I clean the HR2823?

Unplug the juicer. Disassemble all removable parts. Rinse under running water and wash with mild detergent. Most parts are dishwasher safe (top rack). Do not immerse motor base in water.

What should I do if the juicer stops working?

Check if the safety lock is properly engaged. The juicer will not operate if the lid is not locked correctly. Also, ensure it is not overloaded. Let it cool for 15 minutes if overheated.

Can I use the juicer for leafy greens?

Yes, but roll leafy greens into compact bundles before feeding. Alternate with harder vegetables for efficient juicing.

What is the maximum operating time?

Do not operate continuously for more than 2 minutes. After 2 minutes, let the juicer rest for at least 2 minutes to prevent overheating.

How do I store the juicer?

Clean and dry all parts thoroughly before storage. Assemble the pulp container and lid on the motor base to save space. Store in a dry place away from heat.

Is the Philips HR2823 BPA-free?

Yes, all plastic parts that come into contact with food are BPA-free.

Where can I find replacement parts?

Contact Philips customer service or visit the official Philips website. Authorized dealers also stock filter baskets and juice jugs.

Why is the juice overflowing?

Ensure the pulp container is not full. Overfilling the pulp container can cause overflow. Also, check that the filter basket is not clogged. Clean the filter regularly.

USER MANUAL HR2823 PHILIPS

Black-and-white photo of a food blender with open lid and glass mug, surrounded by fresh apples and vegetables (no text or symbols visible)

English Page 4

- Keep pages 3 and 34 open when reading these operating instructions.

Français Page 6

English

With this juice extractor you can make 100% pure fruit juice and vegetable juice.

The appliance is simple to use and very easy to clean.

Important

• Read the instructions in conjunction with the illustrations (pages 3 and 34) before using the appliance.
• Avoid damage. Before connecting please check if the voltage indicated on the appliance corresponds to the mains voltage in your home (110 - 127 V; 220 - 230 V; 230 - 240 V).
• If the mains cord of this appliance is damaged, it must only be replaced by Philips or their service representative, as special tools and/or parts are required.
• Keep the appliance away from children.
• Do not leave the appliance switched on unattended.
• Never use any accessories or parts from other manufacturers or which have not specifically been advised by Philips. Your guarantee is void if such accessories or parts have been used.
• Never put your fingers or cutlery into the feeding tube. Only the provided pusher is suited for this purpose.
• Let the sieve come to a complete stop before pressing the lid release knob and opening the lid.

General description (fig. 1)

A Pusher
B Feeding tube
©Lid
D Sieve
E Pulp container
F Base unit
G Lid release knob
H On/off switch
Mains cord storage
Juice jar

Assembling

• Position the pulp container (fig. 2).
• Position the sieve (fig. 3).
• Place the lid. Push it downwards until it is locked on both sides ("Click!") (fig. 4). Check if the lid is positioned correctly.
• Position the juice jar (fig. 5).
• Insert the mains plug into the wall socket.

Ingredients

• Always use fresh fruits and vegetables, because they produce more juice.
- Especially advisable are pineapple, beetroot, apple, cucumber, carrot, spinach, melon, tomato, orange and grape.
- Starchy fruits, such as banana, paw-paw, avocado, fig and mango fruit should not be processed in this juice extractor. For these types of fruit use a food processor or a (bar) blender.
- It is not necessary to remove thin skins and peels. Only thick ones of e.g. orange, pineapple, apple, uncooked beetroot must be removed.
• Leaves and stems of e.g. lettuce can also be processed in the juice extractor.
- If you wish to make juice from oranges, lemons, mandarin or grape fruit, it is necessary to unpeel and remove the white fibres as otherwise the juice will acquire a bitter taste.
- Apple juice may quickly turn brown. A few drops of lemon juice will slow down this process.

How to use

• Check if the lid is correctly placed.
• For your safety: the appliance can only operate when the lid has been correctly mounted on to the base unit.
• Wash the fruits and/or vegetable(s) (fig. 6) and cut them in pieces (fig. 7) to fit into the feeding tube.
• Switch the appliance on by pressing the on/off switch (fig. 8).
• Put the pieces into the feeding tube and press them gently downwards with the pusher (fig. 9).
• Do not press down with force. This would give worse results and could even block the rotating sieve.
• Never put any objects or your fingers in the feeding tube.

• After the juice has stopped flowing: switch the appliance off (fig. 10) and wait for the sieve to come to a complete standstill, and remove the juice jug (fig. 11).

• Drink the juice immediately after it has been extracted, as exposure to the open air for any length of time will result in the juice losing its nutritional value and its taste. However, if you wish to keep the juice, put it into the refrigerator in a well-closed container for a maximum of 24 hours.

• If you wish to catch the last amount of juice in the juice jug, put the jug back into the juice extractor and switch the appliance on.
• When the pulp container is full: switch off (fig. 10) and wait for the sieve to come to a complete standstill, press the release knob downwards to disassemble the lid (fig. 12), remove the pulp container (fig. 13), empty the pulp container (fig. 14). Reassemble the juice extractor and continue the process.
• The maximum capacity of the juice jug is 650 ml. When the juice jug is full: switch the appliance off (fig. 10) and wait for the sieve to come to a complete standstill, remove (fig. 11) and empty the juice jug.

Culinary hints

• With tomato juice you can prepare a delicious Bloody Mary.
• Pulp of e.g. carrots, beetroots, cabbage, spinach can be used as a basis for soup, sauce, jam, ice-cream and dessert. Cook the pulp with some spices. Liquidize the cooked pulp using a food processor or a (bar) blender. Use tomato pulp to make a tomato paste.
• Try these combinations of juices: apple with carrot, orange with grape, pineapple with grapefruit, beetroot with carrot, carrot with melon, apple with orange.

Cleaning

• Switch off and remove the mains plug from the wall socket before cleaning.
• Disassemble the appliance for washing-up as indicated in figs. 11-14.
• The base unit may be wiped with a damp cloth, some detergent may be required.
• Do not use scourers, scouring pads, abrasives, steel wool, acetone, alcohol etc.
• Wash the parts which have been in contact with food in warm soapy water immediately after use.
• Do not clean parts in a dishwasher.

For U.K. only:

Fitting a different plug

This appliance is fitted with a BS 1363 13 Amp. plug.

Should you need to replace the plug, connect the wires as follows:

Brown wire to the Live (L) terminal of the new plug.

Blue wire to the Neutral (N) terminal of the new plug.

Always fit the same value of fuse as that originally supplied with your appliance.

Only use BS 1362 approved fuses. As a guide only: Appliances under 700 W can have a 3 Amp. fuse (red) and all others should have a 13 Amp. fuse (brown).

When disposing of an old plug (particularly the moulded type which has been cut from the mains cord) always remove the fuse as the plug could be dangerous if ever inserted in a live socket.

Français

Abstract geometric shape with diagonal lines forming a triangular frame (no text or symbols)