ASX (2014) - Car MITSUBISHI - Free user manual and instructions
Find the device manual for free ASX (2014) MITSUBISHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | SUV |
| Overall Length | 4300 mm |
| Overall Width | 1810 mm |
| Overall Height | 1615 mm |
| Wheelbase | 2670 mm |
| Ground Clearance | 195 mm |
| Curb Weight | 1370 kg |
| Fuel Tank Capacity | 63 L |
| Engine Type | 4-cylinder petrol |
| Displacement | 1998 cc |
| Max Power | 110 kW (150 hp) at 6000 rpm |
| Max Torque | 197 Nm at 4200 rpm |
| Transmission | 5-speed manual or CVT |
| Drive Type | Front-wheel drive or All-wheel drive |
| Fuel Consumption (Combined) | 6.5 L/100 km |
| CO2 Emissions | 150 g/km |
| Seating Capacity | 5 |
| Number of Doors | 5 |
| Safety Features | ABS, EBD, dual front airbags, side airbags |
| Tires | 215/65 R16 |
| Infotainment | Radio, CD, USB, Bluetooth |
| Air Conditioning | Manual or automatic climate control |
| Traction Control | Yes |
Frequently Asked Questions - ASX (2014) MITSUBISHI
How do I change the oil on a 2014 Mitsubishi ASX?
To change the oil, warm up the engine, drain the old oil from the drain plug, replace the oil filter (located near the oil pan), and refill with approximately 4.5 liters of 5W-30 engine oil. Always check the owner's manual for exact specifications.
What is the recommended tire pressure for the ASX?
The recommended tire pressure for the 2014 Mitsubishi ASX is 32 psi (2.2 bar) for both front and rear tires. Check the sticker inside the driver's door jamb for confirmation.
How do I reset the service light on a Mitsubishi ASX?
Turn the ignition to ON position (do not start the engine). Press the INFO button until the service reminder appears. Then press and hold the INFO button for about 10 seconds until the light resets.
What type of engine oil does the 2014 Mitsubishi ASX require?
The 2014 ASX typically requires 5W-30 synthetic or conventional oil. Use API SN or higher quality. Capacity is about 4.5 liters including filter.
How to jump start a Mitsubishi ASX?
Connect positive (+) jumper cable to dead battery positive, then to good battery positive. Connect negative (-) cable to good battery negative, then to an unpainted metal part on the dead car's engine block. Start the good car, let it run, then start the ASX.
What is the towing capacity of the Mitsubishi ASX?
The towing capacity for the 2014 Mitsubishi ASX is up to 1300 kg (braked trailer) for petrol models. Always verify with your vehicle's specific configuration.
How to pair a phone via Bluetooth in the ASX?
Enable Bluetooth on your phone. Press the PHONE button on the audio system. Select 'Pair New Device' on the screen. Search for Mitsubishi ASX on your phone and enter the PIN 0000 (or 1234). Confirm pairing.
What are the common issues with the 2014 ASX?
Common issues include noisy CVT transmission, battery drain, and suspension creaks. Regular maintenance and timely repairs help mitigate these problems.
How to replace the cabin air filter in a Mitsubishi ASX?
The cabin air filter is behind the glove box. Open the glove box, remove the damper (if equipped), squeeze the sides to drop the glove box down. Remove the filter cover, slide out the old filter, install new one with arrow pointing down.
What is the fuel tank capacity of the 2014 Mitsubishi ASX?
The fuel tank capacity is 63 liters (16.6 gallons). This includes a reserve of approximately 10 liters.
User questions about ASX (2014) MITSUBISHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Car in PDF format for free! Find your manual ASX (2014) - MITSUBISHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ASX (2014) by MITSUBISHI.
USER MANUAL ASX (2014) MITSUBISHI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MITSUBISHI
Model : ASX (2014)
Category : Car