AU-D5D - Audio/video converter CYP - Free user manual and instructions

Product Type	Audio/Video Converter
Brand	CYP
Model	AU-D5D
Input Interface	HDMI (Type A)
Output Interface	HDMI (Type A) + 3.5mm Audio Jack
Max Resolution	3840x2160@30Hz (4K UHD)
Supported Audio Formats	PCM, Dolby Digital, DTS
Power Supply	5V DC / 1A
Power Consumption	<5W
Dimensions (W x D x H)	120 x 70 x 25 mm
Weight	200 g
Housing Material	Metal
LED Indicators	Power (blue), Signal (green)
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C
Certifications	CE, FCC
Warranty	1 year
Package Contents	Converter, Power Adapter, User Manual
Plug and Play	Yes
EDID Management	Automatic

Frequently Asked Questions - AU-D5D CYP

How do I connect the AU-D5D converter?

Connect the HDMI source to the input port, then connect an HDMI display to the output port. For audio extraction, plug speakers or headphones into the 3.5mm jack. Finally, power the device via the included adapter.

The device is not powering on. What should I check?

Ensure the power adapter is securely connected to the converter and a working outlet. Try a different cable or outlet. The blue power LED should illuminate when powered.

Why is there no video output?

Verify all HDMI connections are tight and the display is set to the correct input. The converter supports resolutions up to 4K@30Hz; if your source outputs beyond that, reduce resolution. Also check HDCP compatibility.

Audio is not working through the 3.5mm jack. What can I do?

Make sure the source device is outputting audio (e.g., not muted). Try a different audio cable. The converter extracts PCM, Dolby Digital, and DTS; other formats may not pass through.

Does the AU-D5D support 4K resolution?

Yes, it supports 4K Ultra HD at 30Hz (3840x2160). For 4K@60Hz or higher, consider a different model. It also supports 1080p and lower resolutions.

Does it support Dolby Atmos or DTS:X?

The converter supports Dolby Digital and DTS core formats but not object-based audio like Atmos or DTS:X. For these, use a direct HDMI connection to a compatible receiver.

What is the maximum recommended cable length?

For reliable operation, use HDMI cables up to 5 meters (16 feet) for 4K and up to 10 meters (33 feet) for 1080p. Longer cables may require a signal booster.

Is the converter plug and play?

Yes, no drivers or software installation is needed. Simply connect all cables and power on the device. It automatically configures EDID and HDCP settings.

How do I reset the AU-D5D?

Disconnect the power adapter from the converter, wait 10 seconds, then reconnect it. This will reset the device to factory defaults.

What do the LED indicators mean?

A solid blue LED indicates power is on. A green LED lights when an active HDMI signal is detected. If green is off, check source and cables.

USER MANUAL AU-D5D CYP

DOLBY

DIGITAL

dts

2.0+Digital Out

AU-D5D

Coaxial to Analogue Stereo Audio Converter with Dolby® Digital & DTS® 2.0 Decoder

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document. CYP (UK) Ltd also makes no commitment to update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document and/or product at any time and without notice.

COPYRIGHT NOTICE

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means—electronic, mechanical, magnetic, optical, chemical, manual, or otherwise—without express written permission and consent from CYP (UK) Ltd.

© Copyright 2011 by CYP (UK) Ltd.

All Rights Reserved.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be trademarks of the companies with which they are associated. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

DOLBY

DIGITAL

dts.

2.0 Channel

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this equipment:

• Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 11/08/15	First release

CONTENTS

1. Introduction......6
2. Applications ......6
3. Package Contents ......6
4. System Requirements ......6
5. Features......7
6. Operation Controls and Functions .....8
   6.1 Front Panel 8
   6.2 Rear Panel....8
7. Connection Diagram......9
8. Specifications......10
   8.1 Technical Specification ....10
   8.2 Audio Specifications:....10
   8.3 Input Audio to Output Audio Chart:.11
9. Acronyms......11

1. INTRODUCTION

The Coaxial to Analogue Audio Converter (DAC) with Dolby ^® Digital & DTS ^TM 2.0 Decoder provides the ideal solution for converting an coaxial digital audio signal to analogue stereo audio. It provides high quality sound conversion. The Dolby Digital & DTS 2.0 function guarantees that Dolby digital audio signals are downmixed to analogue stereo without loss of quality. This unit is perfect for use in computer audio systems or digital mixing consoles.

2. APPLICATIONS

■ Converting digital coaxial audio into analogue stereo
■ Converting Dolby Digital formatted audio into analogue stereo
■ Converting DTS 2.0 formatted audio into analogue stereo
HDTV with only digital audio output to analogue amplifier input
Improving the digital to analogue conversion quality from any stereo optical digital audio source

3. PACKAGE CONTENTS

Coaxial to Analogue Audio Converter with Dolby Digital Decoder & DTS 2.0 Decoder

Operation Manual

4. SYSTEM REQUIREMENTS

Digital audio source device such as DVD/Blu-ray player or Media player with an coaxial output cable and to a device such as an amplifier or AV receiver with analogue stereo input.

5. FEATURES

■ Supports coaxial digital audio signal input and conversion into analogue audio signal L/R output
Supports LPCM 2CH audio sampling rates from 32 to 96 kHz (32, 44.1, 48, 88.2 and 96 kHz)
Supports DTS 2.0 5.1CH audio sampling rates up to 96 kHz
Supports Dolby Digital 5.1CH audio sampling rates of up to 48 kHz
Supports Dolby Digital & DTS 2.0 audio downmixing to 2-channel audio
Supports S/PDIF bitstream 24-bit of data for the left and right channels
Compact, elegant design and easy to install

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

1 Dolby/DTS LED Indicator: When the source audio is encoded in Dolby Digital the LED will illuminate in green. When the source audio is encoded in DTS 2.0 the LED will illuminate in red other types of audio the LED will not illuminate.
2 COAXIAL IN: Connect the coaxial input to an Coaxial digital audio source, such as a Games Console, HDTV or Set-top Box.
3 POWER 5V: Plug the 5V DC power supply into the unit and connect the adaptor to an AC outlet.
4 Power LED: The LED will illuminate when connected to power.

6.2 Rear Panel

1 R/L LINE OUT: Connect the R/L analogue audio output to the input of your AV Receiver or audio system.

7. CONNECTION DIAGRAM

Amplifier (with a spare analogue input)

8. SPECIFICATIONS

8.1 Technical Specification

Input Port 1×Coaxial

Output Port 1×L/R (2×RCA)

Power Supply 5V/1A DC (US/EU standards, CE/FCC/UL certified)

Output Level 2Vrms ± 10%

THD+N <0.007%

Frequency Response ±1 dB

SNR >100 dB

Crosstalk <-119 dB

Dimensions 55 mm (W)×75.5 mm (D)×22.5 mm (H)/ Jacks Excluded 55 mm (W)×86 mm (D)×22.5 mm (H)/ Jacks Included

Weight 42 g

Chassis Material Plastic

Silkscreen Colour White

Operating Temperature 0 °C \~ 40 °C/32 °F \~ 104 °F

Storage Temperature -20 °C\~60 °C/-4 °F\~140 °F

Relative Humidity 20\~90% RH (non-condensing)

Power Consumption 1.7 W

8.2 Audio Specifications:

	Output Level	T.H.D+N (A-Weight)	Frequency Response	SNR	Crosstalk
Coaxial 0dBFS/1kHz/	2Vrms±10%	<0.01%	±1 dB	>100 dB	<-115 dB

8.3 Input Audio to Output Audio Chart:

AUDIO INPUT INPUT FORMAT AUDIO L/R OUTPUT
COAXIAL Dolby	LPCM 2CH Analogue 2CH
	Digital Decoding Lt/Rt
	DTS Decoding	Lo/Ro

9. ACRONYMS

ACRONYM COMPLETE TERM

DAC Digital to Analogue Converter

RCA Audio Connector (Radio Corporation of America)

SNR Signal-to-noise Ratio

THD Total Harmonic Distortion

USB Universal Serial Bus

CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton, Middlesex, TW17 8BA

Tel: [phone] | Fax: [phone]

Email: [e-mail]

www.cypeurope.com

v1.00