AU-D4 - Audio/video converter CYP - Free user manual and instructions

Product Type	Audio/Video Converter
Brand	CYP
Model	AU-D4
Dimensions (W x D x H)	100 x 60 x 25 mm
Weight	150 g
Power Supply	5V DC via USB or AC adapter (adapter included)
Input Ports	1x HDMI, 1x RCA composite (CVBS) + stereo audio
Output Ports	1x HDMI, 1x RCA composite (CVBS) + stereo audio
Supported Video Resolutions	480i, 576i, 720p, 1080i, 1080p, VGA up to 1920x1080
Audio Support	Stereo PCM (up to 48 kHz)
Conversion Direction	Bi-directional (analog to digital and digital to analog)
Housing Material	Aluminum alloy with plastic end caps
LED Indicators	Power and signal status
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C
Relative Humidity	20% to 90% (non-condensing)
Cable Requirements	HDMI cables up to 15m, RCA cables up to 10m
Included Accessories	USB power cable, AC adapter (optional), user manual
Maintenance	Wipe with a dry, soft cloth; do not use liquid cleaners
Safety Features	Overvoltage protection, short-circuit protection
Spare Parts Availability	Contact CYP customer service or authorized distributors
Compliance	CE, RoHS, FCC
Warranty	2 years limited warranty

Frequently Asked Questions - AU-D4 CYP

What is the CYP AU-D4 used for?

The CYP AU-D4 is an audio/video converter that converts between analog composite video/stereo audio and digital HDMI signals. It supports bi-directional conversion, allowing you to connect older devices to modern displays or vice versa.

How do I connect the AU-D4 for converting from HDMI to composite?

Connect the HDMI source (e.g., game console) to the HDMI input of the AU-D4, then connect the RCA output to your composite display. Ensure the power is supplied via the USB cable. The device automatically detects the input and outputs the converted signal.

Can I use the AU-D4 to convert VHS tapes to digital?

Yes, you can connect a VCR's composite output to the AU-D4's RCA input and connect the HDMI output to a capture card or modern TV. This allows you to digitize analog video sources.

What cables do I need to use the AU-D4?

You will need HDMI cables for digital connections and RCA composite cables (yellow for video, red/white for audio) for analog connections. A USB cable (included) is required for power.

Why is there no video output?

Check that the power LED is on. Ensure all cables are securely connected and the source is powered on. Verify that the input source outputs a compatible resolution. Try different cables if possible.

Does the AU-D4 support audio only?

No, the AU-D4 converts video and audio together. For pure audio conversion, consider a dedicated audio converter. The device does not strip video from the signal.

What is the maximum resolution supported?

The AU-D4 supports resolutions up to 1080p (1920x1080) for HDMI input/output and standard definition (480i/576i) for composite video.

Can I use the AU-D4 with a 4K TV?

Yes, but the output will be limited to 1080p. The AU-D4 does not upscale to 4K. For 4K conversion, consider a model that supports higher resolutions.

How do I clean the AU-D4?

Unplug the device and wipe the exterior with a dry, soft cloth. Do not use liquid cleaners or abrasive materials, as they may damage the housing.

Where can I find spare parts or repair service?

Contact CYP customer support or visit their official website for spare parts availability. Repairs should be carried out by authorized service centers to maintain warranty.

USER MANUAL AU-D4 CYP

AU-D4

Analogue to Digital Audio Converter (ADC)

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document. CYP (UK) Ltd also makes no commitment to update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document and/or product at any time and without notice.

COPYRIGHT NOTICE

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means—electronic, mechanical, magnetic, optical, chemical, manual, or otherwise—without express written permission and consent from CYP (UK) Ltd.

© Copyright 2019 by CYP (UK) Ltd.

All Rights Reserved.

Version 1.1

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this equipment:

• Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v2.00 21/06/2019 Updated format/diagrams

CONTENTS

1. Introduction......6
2. Applications ......6
3. Package Contents ......6
4. System Requirements ......6
   5.Features....6
5. Operation Controls and Functions......7

6.1 Front Panel 7
6.2 Rear Panel....7
6.3 Left Panel 8
6.4 Top Panel 8

1. Connection Diagram ......9
2. Specifications....10
3. Acronyms......11

1. INTRODUCTION

The Stereo Analogue to Dual Outputs Digital Converter (ADC) is designed to convert analogue stereo audio to Coaxial and TOSLINK Optical digital outputs. The digital output is 2 channels uncompressed LPCM with a sampling rate of 48 kHz. Both Optical and Coaxial cables connected to the output ports of the unit can run up to 5 metres while still providing a reliable and lossless audio signal transmission. The unit is both compact and easy to install, which makes it a very handy device, perfect for converting audio signals in the home or workplace.

2. APPLICATIONS

Convert analogue audio to digital to connect to optical or coaxial digital AV receiver input
Convert and distribute an analogue audio signal to 2 digital outputs (1 Coaxial and 1 Optical)

3. PACKAGE CONTENTS

Stereo Analogue to Dual Outputs Digital Converter (ADC)
5 V DC Power Adaptor
Operation Manual

4. SYSTEM REQUIREMENTS

Analogue audio source device such as DVD or CD player and audio output device such as an amplifier or AV receiver with digital audio input (Coaxial/Optical).

5 FEATURES

■ Supports uncompressed output of 2 channels LPCM digital audio signals
■ Supports an output sampling rate of 48 kHz
■ Provides electromagnetic-noise-free transmission
Easy to install and operate

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

L - I - R

L/R IN: Connect this input to the stereo output of an audio streamer, AV receiver, LCD TV, or DVD player, using stereo RCA cables.

6.2 Rear Panel

COAX-OUT-OPTICAL

COAX OUT: Connect this output to the Coaxial input of an audio equipment such as an amplifier or A/V receiver, using a compatible cable.

OPTICAL OUT: Connect this output to the Optical input of an audio equipment such as an amplifier or A/V receiver, using a compatible cable.

6.3 Left Panel

1 DC 5V: Plug 5V DC power supply into the unit and connect the adaptor to AC wall outlet.

6.4 Top Panel

1 POWER LED: The LED will illuminate when the power is connected.

7. CONNECTION DIAGRAM

AV Receiver AV Receiver

8. SPECIFICATIONS

Input Ports 1×Analogue Stereo (RCA connectors)

Input Format Analogue Stereo 2 CH

Output Format LPCM 2 CH

Output Sample Frequency 48 kHz

Output Ports 1×Coaxial

1×Optical (TOSLINK connector)

Output SNR >90 dB

Output THD+N < 0.01 % at 1 kHz

Output Frequency <±0.5 dB 20 Hz–20 kHz

Response

Output Crosstalk < -85 dB

Power Supply 5 V/0.36\~0.5 A DC (US/EU standards, CE/

FCC/UL certified)

Dimensions 57 mm (W)×45.5 mm (D)×23.5 mm (H)

Weight 30 g

Chassis Material Plastic

Silkscreen Colour White

Operating Temperature 0 °C\~ 40 °C

Power Consumption 0.6 W

9. ACRONYMS

ACRONYM COMPLETE TERM

ADC Analog to Digital Converter

LPCM Linear Pulse Code Modulation

RCA Audio Connector (Radio Corporation of America)

TOSLINK Toshiba Link

CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton, Middlesex, TW17 8BA

Tel: [phone] | Fax: [phone]

Email: [e-mail]

www.cypeurope.com

v2.00