AU-22DD - Audio/video converter CYP - Free user manual and instructions

Product Type	Audio/Video Converter
Brand	CYP
Model	AU-22DD
Dimensions (W x D x H)	100 mm x 65 mm x 25 mm
Weight	200 g
Power Supply	DC 5V / 1A (via USB or adapter)
Input Interface	HDMI / VGA / Composite (depending on variant)
Output Interface	HDMI / VGA / Composite with audio
Supported Resolutions	480i/p, 576i/p, 720p, 1080i/p up to 4K@30Hz
Audio Support	Stereo analog and digital (PCM, Dolby)
Conversion Type	Analog to digital, digital to digital scaling
Key Features	Automatic input detection, EDID management, frame rate conversion
Operating Temperature	0°C to 50°C
Storage Temperature	-20°C to 60°C
Cleaning Instructions	Wipe with a dry, soft cloth. Do not use liquids or solvents.
Safety Warnings	Use only supplied power adapter. Avoid moisture and extreme temperatures.
Repairability	No user-serviceable parts inside. Contact professional service for repair.
Spare Parts Availability	Power adapter and cables sold separately via authorized dealers.
Compliance	CE, FCC, RoHS
Box Contents	Converter unit, USB power cable, user manual

Frequently Asked Questions - AU-22DD CYP

What is the CYP AU-22DD used for?

The CYP AU-22DD is an audio/video converter that converts between analog and digital signals or scales video resolutions. It is commonly used to connect older devices to modern displays.

What input and output formats does it support?

It supports HDMI, VGA, and composite inputs and outputs. Typical conversions include HDMI to VGA, VGA to HDMI, or composite to HDMI with audio embedding.

Does the AU-22DD support 4K resolution?

Yes, the device supports up to 4K@30Hz on the HDMI output when scaling or passing through.

How do I power the converter?

Power is supplied via a 5V DC micro USB connection. Use the included USB cable with a standard USB charger or a powered USB port.

Why is there no video output?

Check that all cables are securely connected and the input source is active. Ensure the EDID settings match your display. Try power cycling the device.

Can I use this converter for audio only?

Yes, the device can extract or embed audio. For example, it can separate HDMI audio to analog stereo output.

Does it require drivers or software?

No, the AU-22DD is plug-and-play. No additional drivers are needed for basic operation.

What is the maximum cable length supported?

For HDMI, up to 15 meters with a good quality cable. For VGA, up to 10 meters. Longer runs may require signal boosters.

How do I clean the device?

Use a dry, lint-free cloth to wipe the exterior. Do not apply liquids or cleaning agents directly.

Where can I find the user manual?

The user manual is available for free download on notice-facile.com. Search for model AU-22DD by CYP.

USER MANUAL AU-22DD CYP

The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document. CYP (UK) Ltd also makes no commitment to update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document and/or product at any time and without notice.

COPYRIGHT NOTICE

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means—electronic, mechanical, magnetic, optical, chemical, manual, or otherwise—without express written permission and consent from CYP (UK) Ltd.

© Copyright 2011 by CYP (UK) Ltd.

All Rights Reserved.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be trademarks of the companies with which they are associated. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

DOLBY

DIGITAL

dts.

2.0 Channel

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this equipment:

• Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 11/08/15	First release

CONTENTS

1. Introduction......6
2. Applications ......6
3. Package Contents ......6
4. System Requirements ......6
5. Features......7
6. Operation Controls and Functions .....8

6.1 Top Panel 8
6.2 Right Panel....9
6.3 Left Panel....9
6.4 Rear Panel....10

1. Connection Diagram ...... 11
2. Specifications......12

8.1 Technical Specifications ......12
8.2 Audio Specifications....13
8.3 Input Audio to Output Audio Chart..13

1. Acronyms......14

1. INTRODUCTION

The AU-22DD is a versatile audio converter allowing users to convert analogue audio signals to digital or digital audio signals to analogue. The AU-22DD supports Dolby Digital and DTS audio downmixing, and can simultaneously output from all 3 audio formats without any signal loss, adding extra flexibility to your AV system.

2. APPLICATIONS

■ Analog to digital audio signal conversion (ADC)
■ Digital to analog audio signal conversion (DAC)
Simultaneous digital and analogue audio outputs
Downmixing of Dolby Digital signals
Downmixing of DTS 2.0+Digital Out signals

3. PACKAGE CONTENTS

■ Universal Digital/Analog Audio Converter with Dolby Digital & DTS 2.0+Digital Out Decoder
5 V/1 A Power Adaptor
Operation Manual

4. SYSTEM REQUIREMENTS

Audio Source equipment such as CD/DVD Player with connection cable(s) and AV receiver or similar for audio output.

5. FEATURES

Embedded Dolby Digital & DTS Decoder technology for Digital downmixing
Bi-directional Digital/Analogue Audio Converter
Three-way conversion; Coaxial to Optical & Analogue, Optical to Coaxial & Analogue, and Analogue to Optical & Coaxial
Integrated digital interpolator filter and Digital-to-Analogue Converter (DAC)
■ Supports input sampling rates from 32 to 96 KHz and output at 48 KHz
Provides electromagnetic noise free transmission

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Top Panel

1 POWER LED Indicator

The LED will illuminate in blue when the power is connected and in red when switched off. The unit will automatically turn on when connected to an AC wall outlet.

2 Dolby Digital LED Indicator

When the source is Dolby Digital encoded the LED will illuminate in red and will remain off if not.

3 L/R IN LED Indicator

When selecting the L/R input, the blue LED will turn on.

4 COAX IN LED Indicator

When selecting the Coaxial input, the blue LED will turn on.

5 OPTICAL IN LED Indicator

When selecting the Optical input, the blue LED will turn on.

6 DTS 2.0+Digital Out LED Indicator

When the source is DTS 2.0+Digital Out encoded the LED will illuminate in red and will remain off if not.

6.2 Right Panel

1 OPTICAL IN

Connect to the audio source's optical output.

2 COAX IN

Connect to the audio source's coaxial output.

3 L/R IN

Connect to the analog audio source with a stereo RCA cable.

6.3 Left Panel

1 L/R OUT

Connect to the analogue audio compatible audio equipment, such as a TV or amplifier with a stereo RCA cable.

2 COAX OUT

Connect to the coaxial digital audio input of an audio system such as an amplifier or active speakers

3 OPTICAL OUT

Connect to the optical digital audio input of an audio system such as an amplifier or active speakers.

6.4 Rear Panel

1 DC 5V

Connect the 5 V/1 A DC power supply to the unit and plug the adaptor to an AC wall outlet.

2 INPUT SELECT

Selects the current audio source, either optical, coaxial or L/R (Analog).

3 POWER

Push the button to turn the unit on or off. The device supports last power memory function, when the power supply is reconnected it will the last settings used.

7. CONNECTION DIAGRAM

AV ReceiverTV AV Receiver

8. SPECIFICATIONS

8.1 Technical Specifications

Input Ports 1×Optical, 1×Coaxial, 1×Analog Stereo (L/R)

Input Format LPCM 2CH & Dolby Digital/DTS 2.0+Digital from Optical or Coaxial

Input Sample Rates 32 \~ 96 kHz

Output Ports 1×Coaxial, 1×Optical, 1×Analog Stereo (L/R)

L/R Input Impedance 47 KΩ

L/R Output Impedance 600 Ω

ESDProtectionHuman body model: ±10 kV (air-gap discharge) ±6 kV (contact discharge)

Power Supply 5 V/1 A DC (US/EU standard, CE/FCC/UL certified)

Dimensions 85 mm (W)×85 mm (D)×35 mm (H)/Jacks Excluded 97 mm (W)×85 mm (D)×35 mm (H)/Jacks Included

Weight 108 g

Chassis Material Plastic

Silkscreen Color White

Operating Temperature 0 °C\~40°C / 32 °F\~104 °F

Storage Temperature -20°C 60°C / -4°F 140°F

Relative Humidity 20\~90 % RH (non-condensing)

Power Consumption 2.2W

8.2 Audio Specifications

OUTIN	Output Output Level		T.H.D+N(A-Weight)	Frequency Response	SNR Crosstalk
Optical 0dBFS	Optical 0~	-1dBFS <0.001% ±1 dBFS >135 dB	-1 dBFS >135 dB	-155 dB
	Coaxial 0~	-1dBFS <0.001% ±1 dBFS >135 dB	-1 dBFS >135 dB	-155 dB
	Line-Out 1.9Vrms±10% <0.01% ±51 dB >85 dB<-100 dB
Coaxial 0dBFS	Optical 0~	-1dBFS <0.001% ±1 dBFS >135 dB	-1 dBFS >135 dB	-155 dB
	Coaxial 0~	-1dBFS <0.001% ±1 dBFS >135 dB	-1 dBFS >135 dB	-155 dB
		Line-Out 1.9Vrms±10% <0.01% ±51 dB >85 dB<-100 dB
Line 2Vrms	Optical 0~	-1dBFS <0.01% ±51 dB >100 dB	-1 dBFS >100 dB	-95 dB
	Coaxial 0~	-1dBFS <0.01% ±1 dB >100 dB	-1 dBFS >100 dB	-95 dB
	Line-Out 1.9Vrms±10% <0.01% ±1 dB >85 dB<-95 dB

8.3 Input Audio to Output Audio Chart

Audio Input	Input Format	Audio Output
		Analog L/R	COAXIAL	OPTICAL
Analog L/R	Analog 2CH Analog 2CH		LPCM 2CH
COAXIAL or OPTICAL	LPCM 2CH	Analog 2CH	LPCM 2CH
	Dolby Digital	Decoding Lt/Rt	Bitstream/Pass-through
	DTS	Decoding Lo/Ro	Bitstream/Pass-through

9. ACRONYMS

ACRONYM COMPLETE TERM
Ω Ohm
ADC Analogue to Digital Conversion
COAX Coaxial
DAC Digital to Analogue Conversion
LPCM Linear Pulse Code Modulation

CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton, Middlesex, TW17 8BA

Tel: [phone] | Fax: [phone]

Email: [e-mail]

www.cypeurope.com

v1.00