UT51 - Multimeter Uni-T - Free user manual and instructions
Find the device manual for free UT51 Uni-T in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Digital Multimeter |
| Model | UT51 |
| Brand | Uni-T |
| Display | LCD, 1999 counts |
| DC Voltage Range | 200mV/2V/20V/200V/600V |
| AC Voltage Range | 200V/600V |
| DC Current Range | 200µA/2mA/20mA/200mA/10A |
| Resistance Range | 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ |
| Continuity Test | Yes (buzzer) |
| Diode Test | Yes |
| Transistor Test | No |
| Capacitance Measurement | No |
| Frequency Measurement | No |
| Safety Rating | CAT II 600V |
| Power Supply | 9V battery (6F22) |
| Dimensions | Approx. 150 x 70 x 30 mm |
| Weight | Approx. 200 g (including battery) |
| Accessories | Test leads, battery, user manual |
| Auto Power Off | Yes (after 15 minutes inactivity) |
| Overload Protection | Yes |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 50°C |
| Cleaning | Wipe with dry cloth; do not use solvents |
Frequently Asked Questions - UT51 Uni-T
How do I measure DC voltage with the UT51?
Set the rotary switch to the VDC position. Connect the black lead to COM and red lead to VΩmA. Touch the probes to the circuit. Read the voltage on the display. Ensure the voltage does not exceed 600V.
What is the maximum current I can measure with the UT51?
The UT51 can measure up to 10A DC. For currents above 200mA, use the 10A input jack. Do not measure currents exceeding 10A for more than 10 seconds to avoid damage.
How do I check continuity with the UT51?
Turn the dial to the continuity test position (usually marked with a diode symbol and sound waves). Insert the black lead into COM and red into VΩmA. Touch the probes to the two points. If the resistance is less than about 50Ω, the buzzer will sound.
How do I replace the battery in the UT51?
Turn off the meter. Remove the test leads. Unscrew the battery compartment cover on the back. Replace the 9V battery (6F22) with a new one. Replace the cover and screws. Do not use rechargeable batteries.
What does the 'CAT II 600V' rating mean?
CAT II refers to the measurement category for circuits directly connected to a building's electrical installation (e.g., outlets). 600V indicates the maximum voltage the meter can withstand safely in that category. It is suitable for household and office environments.
Can I measure AC current with the UT51?
No, the UT51 only measures DC current. For AC current, you would need a clamp meter or a different model that supports AC current measurement. Always check the specifications before measuring.
Why does my UT51 show an incorrect reading?
Possible causes include: low battery, incorrect range selection, damaged test leads, or the meter being in manual range mode. Replace the battery if the display shows a low battery symbol. Ensure the rotary switch is in the correct setting. Check test leads for continuity.
How do I use the diode test function?
Set the rotary switch to the diode test position (indicated by a diode symbol). Insert the black lead into COM and red into VΩmA. Connect the red probe to the anode and black to the cathode. The display shows the forward voltage drop. If it reads OL, the diode is open.
What should I do if the UT51 shows 'OL'?
'OL' means overrange. The measured value exceeds the selected range. Switch to a higher range. If it still shows OL, the input may be too high for the meter. Do not exceed the maximum ratings.
How do I clean and maintain the UT51?
Clean the casing with a dry, soft cloth. Do not use water, solvents, or abrasive cleaners. Store the meter in a dry place away from extreme temperatures. Remove the battery if not used for an extended period to prevent leakage.
User questions about UT51 Uni-T
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual UT51 - Uni-T and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UT51 by Uni-T.
USER MANUAL UT51 Uni-T
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Uni-T
Model : UT51
Category : Multimeter