UT30D - Multimeter Uni-T - Free user manual and instructions
Find the device manual for free UT30D Uni-T in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Digital Multimeter (DMM) |
| Brand | Uni-T |
| Model | UT30D |
| Display | Analog LCD, 2000 counts |
| DC voltage range | 200mV / 2V / 20V / 200V / 1000V |
| AC voltage range | 200V / 750V |
| DC current range | 20µA / 200µA / 2mA / 20mA / 200mA / 10A |
| Resistance range | 200Ω / 2kΩ / 20kΩ / 200kΩ / 2MΩ / 20MΩ |
| Capacitance measurement | No |
| Frequency measurement | No |
| Temperature measurement | No |
| Continuity test | Yes (with buzzer) |
| Diode test | Yes |
| Transistor test | No |
| Auto power off | Yes (approx. 15 minutes) |
| Data hold | Yes |
| Safety rating | CAT II 1000V, CAT III 600V |
| Power supply | 2 x 1.5V AA batteries |
| Dimensions | 126 x 70 x 26 mm |
| Weight | approx. 140 g (including batteries) |
| Input impedance | >1MΩ on DC voltage ranges |
| Fuse protection | Yes (mA/µA range: 0.2A/250V; 10A range: 10A/250V) |
| Operating temperature | 0°C to 40°C |
Frequently Asked Questions - UT30D Uni-T
How do I measure DC voltage with the UT30D?
Set the rotary switch to the desired DC voltage range (200mV, 2V, 20V, 200V, or 1000V). Connect the red probe to the VΩmA jack and the black probe to COM. Touch the probes to the circuit in parallel. Read the value on the analog scale, using the corresponding range marking.
What is the maximum AC voltage the UT30D can measure?
The UT30D can measure AC voltage up to 750V RMS in the 750V range. The 200V range covers up to 200V. Use the appropriate range and note that the meter is not autoranging.
How do I test continuity with this multimeter?
Turn the rotary switch to the continuity position (usually indicated by a diode symbol with sound waves). Insert the probes into VΩmA and COM. Touch the probes across the circuit. If continuity exists (resistance below approx. 50Ω), the buzzer will sound.
What type of battery does the UT30D use?
The UT30D uses two 1.5V AA alkaline batteries. To replace them, remove the battery compartment screw on the back, open the cover, and replace the old batteries with new ones, observing polarity.
How do I measure DC current over 200mA?
For currents between 200mA and 10A, set the switch to the 10A position. Move the red probe from the VΩmA jack to the 10A jack. Connect the meter in series with the circuit. Do not measure currents above 10A for more than 15 seconds to avoid overheating.
What does the 'hold' button do?
The DATA HOLD button freezes the current reading on the display, allowing you to note the measurement without keeping the probes connected. Press the button again to release the display.
Is the UT30D safe for measuring mains voltage?
Yes, the UT30D is rated CAT II up to 1000V and CAT III up to 600V, making it suitable for measuring domestic mains voltage. Always ensure the probes are properly inserted and in good condition, and never exceed the rated voltage for the selected range.
Why is the reading on the analog scale confusing?
The UT30D has an analog display with multiple scales. You must select the correct scale corresponding to the range you set (e.g., for the 200V DC range, read the 0-200 scale). The manual includes a diagram explaining each scale's markings.
How do I replace the fuse in the UT30D?
If the meter fails to measure current, the internal fuse may be blown. Open the battery compartment, locate the fuse holder (usually a small glass or ceramic fuse). Replace the faulty fuse with an identical rating: typically 0.2A/250V for mA/µA ranges and 10A/250V for the 10A range.
Can I measure capacitance with the UT30D?
No, the UT30D does not have a capacitance measurement function. It can measure DC/AC voltage, DC current, resistance, continuity, and diode forward voltage. For capacitance, you would need a different multimeter or a dedicated LCR meter.
User questions about UT30D Uni-T
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual UT30D - Uni-T and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UT30D by Uni-T.
USER MANUAL UT30D Uni-T
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Uni-T
Model : UT30D
Category : Multimeter