UT30B - Multimeter Uni-T - Free user manual and instructions
Find the device manual for free UT30B Uni-T in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Brand | Uni-T |
| Model | UT30B |
| Display | LCD, 1999 counts (3.5 digits) |
| DC Voltage Range | 200 mV, 2 V, 20 V, 200 V, 600 V |
| AC Voltage Range | 200 V, 600 V (50/60 Hz) |
| DC Current Range | 200 µA, 2 mA, 20 mA, 200 mA, 10 A |
| Resistance Range | 200 Ω, 2 kΩ, 20 kΩ, 200 kΩ, 2 MΩ |
| Diode Test | Yes, forward voltage drop |
| Continuity Test | Yes, buzzer below approx. 30 Ω |
| Transistor Test | No |
| Capacitance Measurement | No |
| Frequency Measurement | No |
| Temperature Measurement | No |
| Auto Range | No, manual ranging |
| Power Supply | 9V battery (6F22 or equivalent) |
| Dimensions | 126 x 70 x 27 mm |
| Weight | Approx. 180 g (including battery) |
| Safety Rating | CAT II 600 V |
| Accessories Included | Test leads, 9V battery, user manual |
| Maintenance | Wipe with a dry cloth; do not use abrasives |
| Reparability | No user-serviceable parts; refer to qualified technician |
Frequently Asked Questions - UT30B Uni-T
How do I turn on the UT30B multimeter?
Rotate the function switch from the OFF position to any measurement range. The display should turn on. If not, check the battery.
What type of battery does the UT30B use?
It uses a standard 9V battery (6F22 or equivalent). Replace when the low battery indicator (LOBAT) appears on the display.
How do I measure AC voltage with the UT30B?
Set the function switch to the AC voltage range (200V or 600V). Insert the black lead into COM and red lead into VΩmA terminal. Connect probes to the circuit. Read the value on the display.
Can I measure current above 200 mA?
Yes, for currents up to 10A, move the red lead to the 10A terminal and select the 10A range. For currents below 200 mA, use the VΩmA terminal and appropriate range.
How do I test continuity?
Turn the dial to the continuity position (often marked with a diode or sound wave symbol). Connect the test leads across the circuit. The buzzer will sound if the resistance is less than approximately 30 Ω.
What is the maximum voltage the UT30B can measure?
The maximum DC voltage is 600V and maximum AC voltage is 600V RMS. Do not exceed these limits to avoid damage or injury.
How do I replace the battery?
Turn off the meter. Remove the screw on the back cover. Lift off the cover. Replace the 9V battery with a new one. Reattach the cover and tighten the screw.
Why does the display show 1 or -1?
A reading of 1 or -1 on the leftmost digit indicates an overrange condition. Select a higher range. If measuring voltage or current, the input may exceed the selected range.
Is the UT30B safe for household electrical work?
Yes, it is rated for CAT II 600V, suitable for measuring household circuits. However, always follow safety precautions and use properly insulated leads.
How should I clean and store the multimeter?
Clean the casing with a dry cloth. Do not use solvents or abrasive cleaners. Store it in a dry, dust-free environment. Remove the battery if storing for extended periods.
User questions about UT30B Uni-T
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual UT30B - Uni-T and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UT30B by Uni-T.
USER MANUAL UT30B Uni-T
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Uni-T
Model : UT30B
Category : Multimeter