CX-900 - Receiver DAP-Audio - Free user manual and instructions
Find the device manual for free CX-900 DAP-Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Receiver |
| Brand | DAP-Audio |
| Model | CX-900 |
| Dimensions (W x H x D) | 430 x 100 x 300 mm |
| Weight | 5.5 kg |
| Power Supply | AC 110-240V, 50/60Hz |
| Power Consumption | 150 W (max) |
| Output Power | 2 x 50 W RMS (8 ohms) |
| Frequency Range | FM: 87.5-108 MHz, AM: 530-1600 kHz |
| Audio Inputs | 3x RCA, 1x AUX (3.5 mm), 1x Optical |
| Audio Outputs | 2x Speaker terminals, 1x RCA Pre-out, 1x Headphone (6.3 mm) |
| Supported Radio Bands | FM, AM |
| Preset Stations | 30 FM, 30 AM |
| Display | LCD with backlight |
| Remote Control | Included |
| Cleaning | Use a dry, soft cloth; avoid liquids and solvents |
| Safety | Do not open the device; risk of electric shock. Keep away from moisture. |
| Spare Parts | Contact DAP-Audio or authorized service centers |
| Manual Pages | 12 |
| Manual Language | EN |
Frequently Asked Questions - CX-900 DAP-Audio
How do I connect speakers to the CX-900?
Connect the speaker wires to the Speaker terminals on the back panel. Ensure the polarity (+/-) matches. Use speakers with impedance 4-8 ohms.
Can I use the CX-900 with a subwoofer?
Yes, connect an active subwoofer to the RCA Pre-out output.
How do I set up the FM radio?
Connect the supplied FM antenna to the FM ANT terminal. Press the Band button to select FM, then use Tuning to find stations. Press Memory to save presets.
What is the maximum power output?
The CX-900 delivers 2 x 50 W RMS (8 ohms) per channel.
How do I reset the receiver to factory settings?
Press and hold the Power button for 5 seconds while the unit is on. The display will show 'Reset' and the device will reboot.
Can I play audio from my smartphone?
Yes, connect your smartphone to the AUX input (3.5 mm jack) on the front panel using a compatible cable.
What is the power consumption in standby mode?
Standby power consumption is less than 1 W.
Does the CX-900 support Bluetooth?
No, the CX-900 does not have Bluetooth. Use the AUX or optical input for external devices.
How do I clean the receiver?
Use a dry, soft cloth to wipe the exterior. Do not use any liquids, sprays, or solvents.
Where can I find the user manual?
The user manual is available for free at notice-facile.com in PDF format. You can download it directly from the product page.
User questions about CX-900 DAP-Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual CX-900 - DAP-Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CX-900 by DAP-Audio.
USER MANUAL CX-900 DAP-Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DAP-Audio
Model : CX-900
Category : Receiver