SoundSticks Wireless - Loudspeaker HARMAN KARDON - Free user manual and instructions

Product Type	2.1 Channel Wireless Speaker System
Brand	Harman Kardon
Model	SoundSticks Wireless
Dimensions (Satellites)	3.5 x 3.5 x 8.7 in (89 x 89 x 221 mm) each
Dimensions (Subwoofer)	9.1 x 9.1 x 10.2 in (231 x 231 x 259 mm)
Weight (Satellites)	1.1 lbs (0.5 kg) each
Weight (Subwoofer)	5.5 lbs (2.5 kg)
Power Output	60W RMS (20W per satellite, 20W subwoofer)
Frequency Response	45 Hz – 20 kHz
Wireless Connectivity	Bluetooth 4.1 with aptX
Inputs	3.5mm auxiliary, Bluetooth
Controls	Volume up/down, power, Bluetooth pairing button on subwoofer
Power Supply	AC 100-240V, 50/60Hz via external power adapter
Material	Glass (satellite enclosures), plastic (subwoofer)
Special Features	Iconic transparent design; touch-sensitive buttons; aptX low latency
Compatibility	Bluetooth-enabled devices: smartphones, tablets, computers
Cleaning Instructions	Wipe with a soft, dry cloth. Do not use liquid cleaners.
Safety Notes	Keep away from water; do not disassemble; use only supplied power adapter.
Spare Parts Availability	Contact Harman Kardon support for power adapter or replacement satellites.
Repairability	Limited; recommended to seek professional service for internal issues.

Frequently Asked Questions - SoundSticks Wireless HARMAN KARDON

How do I pair the SoundSticks Wireless with my device?

Press and hold the Bluetooth pairing button on the back of the subwoofer until the LED flashes. On your device, select 'Harman Kardon SoundSticks Wireless' from the Bluetooth menu.

Can I use the speaker while it is charging?

Yes, the SoundSticks Wireless can be used while connected to power via the included AC adapter.

What do I do if the sound is distorted?

Check the Bluetooth connection and reduce the volume on both your device and the speaker. Ensure the source audio is not clipped. If using auxiliary cable, verify it is fully inserted.

How do I clean the glass satellite speakers?

Use a soft, dry microfiber cloth to gently wipe the glass surfaces. Avoid using any liquid or abrasive cleaners.

Is the SoundSticks Wireless compatible with all Bluetooth devices?

It is compatible with most Bluetooth devices supporting A2DP profile. For best audio quality, use devices with aptX codec.

How do I reset the speaker to factory settings?

With the speaker off, press and hold the volume up and Bluetooth pairing buttons simultaneously for about 5 seconds until the LED blinks rapidly.

Why is the subwoofer not producing bass?

Ensure the subwoofer is placed on a stable surface and not obstructed. Check that the volume is set appropriately. If using an auxiliary source, verify the cable is connected to the subwoofer's input.

Can I connect the speaker to a TV?

Yes, if your TV has Bluetooth or a 3.5mm audio output. For Bluetooth, follow pairing steps. For wired connection, use a 3.5mm audio cable.

What is the wireless range of the Bluetooth?

The Bluetooth range is approximately 10 meters (33 feet) in open space. Walls and obstacles may reduce the range.

How do I update the firmware?

The SoundSticks Wireless does not support user firmware updates. For any issues, contact Harman Kardon support.

USER MANUAL SoundSticks Wireless HARMAN KARDON

SOUNDSTICKS® WIRELESS

Setup Guide

harman/kardon®

by HARMAN

English

Japanese

Simplified Chinese

SOUNDSTICKS® WIRELESS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.

16. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle.
17. The mains plug of the power supply cord shall remain readily operable.
18. Do not expose batteries to excessive heat such as sunshine, fire or the like.
19. Do not place naked flame sources, such as lighted candles, on the apparatus.

CAUTION		
THE LIGHTNING FLASH WITH AN ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNIN- SULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUF- FICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.	RISK OF ELECTRIC SHOCK DO NOT OPEN	THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPOR- TANT OPERATING AND MAINTENANCE (SER- VICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE PRODUCT.
	WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

SOUNDSTICKS® WIRELESS

Specifications*

System

Frequency range: 44Hz – 20kHz

Power consumption: 4W idle, 65W maximum

Subwoofer

Transducer (1): 6" woofer

Amplifier output power: 20W RMS

Dimensions (W x H): 9–3/16" x 10–3/16" (232mm x 258mm)

Weight: 4 lb (2.2kg)

Satellite

Transducers (4): 1" full-range per channel

Amplifier output power: 10W RMS

per channel

Dimensions (W x H): 2" x 10" (51mm x 254mm)

Weight: 1.5 lb (0.7kg)

Step 1. Place individual SoundSticks (satellites) beside monitor/computer. Place subwoofer as desired, but placement under desk provides best performance.	Step 2. Connect satellite cables to the dual subwoofer cable. Also connect the input cable to the subwoofer input cable jack.	Step 3. Insert SoundSticks input cable into the computer or other audio device.	Step 4. Plug power cord into power adapter.

Troubleshooting
Symptom Possible problem Solution
No sound from SoundSticks speaker system.	No power to subwoofer.Power adapter plug not inserted correctly.No volume or low volume.	Ensure power supply is connected to live power source and is properly connected to subwoofer. Please note: When subwoofer is powered, a power LED should light.Place plug with arrow symbol facing UP into the subwoofer.Touch the volume “Up” (+) pad on the volume control satellite to unmute and/or increase the system volume level.Note: Touching the volume “Down” (−) pad lowers the system volume.Touching both (+) and (−) volume control pads at the same time will mute the system.

*These specifications are subject to change without notice.

Easy Setup Guide

Step 5. Plug power adapter into subwoofer.	Step 6. Plug power cord into wall receptacle.	Step 7. Push the subwoofer volume knob/power ON/OFF button. Unit is on when the LED is lit. Use the subwoofer volume knob to balance the subwoofer's volume with that of the satellites.	Step 8. Turn on Soundsticks Wireless.(Unit will automatically enter pairing mode.) PutBluetooth-enabled device in pairing mode. Select “Soundsticks Wireless” on device's pairing list.Passcode (if required) is0000. When pairing is successful, Soundsticks Wireless’Bluetooth LED will illuminate.	Step 9. Adjust volume level by touching + or – button. Touching both the + and – buttons mutes the audio. When muted, touching either button unmutes the audio.

www.harmankardon.com
Symptom Possible problem Solution
No sound from subwoofer, only satellites.	Subwoofer volume control set at minimum.	Rotate subwoofer volume control clockwise until relative volume level is appropriate.
No sound from satellites, only subwoofer.	Satellites not connected to subwoofer.	Check connection of satellites to subwoofer.
High frequencies sound dull.	Satellites not positioned properly.	Position and tilt (angle) loudspeakers toward listener. The sound from the satellites is very directional due to the four-element linear array design.
No sound from Bluetooth device.	Device not paired.	Pair device with Soundsticks Wireless. Bluetooth LED illuminates when pairing is successful.

This product is intended to be supplied by a listed direct plug-in power unit marked "Class 2" and output rated 16V DC minimum 1.5 A.
*Audio from a paired Bluetooth device will mix with the audio from a connected audio device. To listen to only one device, stop play on the other device.

harman/kardon®

HARMAN

HARMAN International Industries, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA

www.harmankardon.com

Made in P.R.C.

© 2012 HARMAN International Industries, Incorporated. All rights reserved.

Features, specifications and appearance are subject to change without notice.

Harman Kardon and SoundSticks are trademarks of HARMAN International Industries, Incorporated, registered in the United States and/or other countries.

The Bluetooth word mark and logo are registered trademarks and are owned by the Bluetooth SIG, Inc., and any use of such marks by HARMAN International Industries, Incorporated, is under license.

Part No. 950-0454-001 Rev. A