SV221DVIDD - KVM switch StarTech.com - Free user manual and instructions
Find the device manual for free SV221DVIDD StarTech.com in PDF.
| Product Type | KVM Switch |
| Model | SV221DVIDD |
| Brand | StarTech.com |
| Number of Ports | 2 |
| Video Interface | DVI-D |
| Max Video Resolution | 1920 x 1200 (single link) |
| USB Interface | USB 2.0 (type B upstream, type A downstream) |
| Audio Support | 3.5 mm stereo (in/out) |
| Switching Method | Front panel button, hotkey (Scroll Lock + Scroll Lock + number) |
| Power Adapter | DC 5V, 1A (included) |
| Dimensions (L x W x H) | 7.9 x 3.1 x 1.2 in (200 x 80 x 30 mm) |
| Weight | 1.1 lb (0.5 kg) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Humidity | 0% to 80% RH (non-condensing) |
| Maintenance | Clean with a soft, dry cloth; avoid liquids |
| Safety | Use only the provided power adapter; keep away from moisture |
| Spare Parts & Repairability | No user-serviceable parts; contact support for warranty |
| Warranty | 2 years |
Frequently Asked Questions - SV221DVIDD StarTech.com
User questions about SV221DVIDD StarTech.com
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your KVM switch in PDF format for free! Find your manual SV221DVIDD - StarTech.com and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SV221DVIDD by StarTech.com.
USER MANUAL SV221DVIDD StarTech.com
DVI KVM SWITCH WITH DUAL DISPLAY
2 Port StarView DVI KVM with Dual Display
4 Port StarView DVI KVM with Dual Display
SV221DVIDD
SV421DVIDD
Instruction Guide
* Actual product may vary from photo
SV4210VIDO shown
StarTech.com
The Professionals' Source For Hard-to-Find Computer Parts
FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the limit s for a Class B digital device, pursuant to part 15 of the PCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of f and cn, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Technical Support
The following technical resources are available for this S tarTech.com product:
On-line help:
We are constantly adding new information to the Tech Support section of our web site. To access this page, click the Tech Support link on our homepage, wwwstartech.com.in the tech support section there are a number of options that can provide assistance with this product.
Knowledge Base - This tool allows you to search for answers to common issues using key words that describe the product and your issue.
FAQ - This tool provides quick answers to the top questions asked by our customers.
Downloads - This selection takes you to our driver download page where you can find the latest drivers for this product.
Call StarTech.com tech support for help:
USA/Canada: 1-519-455-4931
UK/Ireland/Europe: 00-800-7827-8324
Support hours: Monday to Friday 9:00AM to 5:00PM EST (except holidays)
Warranty Information
This product is backed by a one-year warranty. In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the product s may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers pasts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.
Limit ation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their of ficores, directors, employees or agent s) for any damages (whether direct or indirect, special, punitive incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product..
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
T roubleshooting
If you are experiencing any dif fioulties, first make sure that all your cables are connected to their proper port s and are firmly seated.
My keyboard or mouse does not work
The keyboard or mouse may not have initialized properly. Press and hold the Select button on the front of the switch for three seconds to re-initialize the keyboard and mouse. If problems persist, unplug the mouse or keyboard; wait a few seconds; then, plug them back in.
My keyboard strokes are shifted
The computer was left in a shifted state when last switched. Press both Shift keys.
The Up and Down arrow keys do not work in manual scan mode
Y ou may only have one computer turned on. Manual scan will only scroll through powered-on computers.
My DVI KVM switch occasionally fails to function
Y our computers might not be providing enough power for the switch to function correctly. Plug a DC9V 500mA (minimum) power adapter into the power port on the back of the switch.
My auto-scan interval keeps returning to the default
If all computers connected to the KM switch are turned of f, the KM will return to its default settings. If you want to keep your auto-scan interval, make sure that at least one of your computers is on at all times.
The LED on my SV221DVIDD/SV421DVIDD keeps flashing
The LED on the SV221DVIDD/SV421DVIDD will flash while in Auto-Scan or Manual Scan modes. A flashing LED also indicates no connection (no power input from that specific PC port).
Table of Contents
Introduction 2
Installation 3
Using Your DVI KVM Switch 4
Technical Specifications
Troubleshooting
Technical Support
Warranty Information
12
Introduction
Thank you for purchasing a StarTech.com DVI KVM switch with Dual Display capabilities. Now you can share high quality digital flat panel displays between two (SV221DVIDD) or four (SV421DVIDD) computers using one keyboard and one mouse. The SV221DVIDD and the SV421DVIDD KVM switch with DVI interface offers the highest quality resolution on your flat screen display. This switch is designed for Dual DVI monitor enabled PCs and eliminates the need to buy expensive flat panel display monitors for all your computers.
Features
• Supports both digital and analog video signal transmission
- Supports hot plugging to eliminate the need to power off the KM switch or the PC before connecting or disconnecting peripherals
• Supports PS/2 keyboards and mouse including M/S Intellimouse, Explorer and Logitech NetMouse
- Supports digital resolution of up to 1280 x 1024 and analog resolution of up to 1600 x 1200
- Draws power from your computer 's RS/2 post requires and requires no power adapters
- Indicates active computer on the front panel's LED
• C o m p article with all operating systems
- Backed by StarTech.com's one year warranty
Before Y ou Begin
To ensure a quick and easy device inst allation, please read through this section carefully before attempting to inst all the switch.
System Requirements
- Two (SV221DVIDD) or four (SV421DVIDD) IBM-compatible computers
Contents
This package should contain:
- 1 x 2 port (SV221DV1DD) or 4 port (SV421DV1DD) StarView DVI KVM Switch
Technical Specifications
| User Part s 1 | |
| Computer PortsSV221DVIDD:2SV421DVIDD:4 | |
| Resolution:Analog DisplayDigital Display | Up to 1600 x 1200 pixelsUp to 1280 x 1024 pixels |
| PC ConnectorsSV221DVIDD:KeyboardMouseDV ISV421DVIDD:KeyboardMouseDV I | 2 x RS/2 6-pin Mini Din (female)2 x RS/2 6-pin Mini Din (female)4 x DVI-I Single Link (female)4 x RS/2 6-pin Mini Din (female)4 x RS/2 6-pin Mini Din (female)8 x DVI-I Single Link (female) |
| Console ConnectorsKeyboardMouseDV I | 1 x RS/2 6-pin Mini Din (female)1 x RS/2 6-pin Mini Din (female)2 x DVI-I Single Link (female) |
| Port Selection | Push Button and Hot Keys |
| Power | RS/2 interface & 9V 500mA Adapter (optional) |
| Operating Temperatures | -32 ~ 104°F (0 ~ 40°C) |
| LED Indicator | Port Status (Numerical display) |
| DimensionsSV221DVIDD:LengthWithHeightSV421DVIDD:LengthWithHeight | 5.5 inches (140 mm)3.4 inches (86 mm)2.4 inches (60 mm)8.6 inches (220 mm)3.9 inches (100 mm)2.6 inches (66.5 mm) |
| WeightSV221DVIDD:1.1 IbsSV421DVIDD:2.2 Ibs | (.52 Kgs)(1.0 Kgs) |
| Enclosure | Metal |
| Safety Standards | FCC and CE |
5
Using Y our DVI KVM Switch
The LID on the front of the switch indicates which PC is active. You can scroll between PC's by either pressing the push-button on the front of the switch or by using a hot-key command. A hotkey command is a short sequence of keystroke beginning with the Scroll Look keystroke followed by another keystroke.
NOTE: Do not use the number pad for hockey combinations.
Selecting a Computer
| Command | Hotkey sequence |
| Select computer 1 | Scroll Lock + Scroll Lock + 1 |
| Select computer 2 | Scroll Lock + Scroll Lock + 2 |
| Select computer 3 | Scroll Lock + Scroll Lock + 3 (SV421DIVID only) |
| Select computer 4 | Scroll Lock + Scroll Lock + 4 (SV421DIVID only) |
| Scroll between powered-on computers | Scroll Lock + Scroll Lock + Up/Down arrow |
| Reset the KVM switch | Scroll Lock + Scroll Lock + End |
Auto-Scan Mode
| Command | Hotkey sequence |
| Start auto-scan | Scroll Lock + Scroll Lock + S |
| End auto-scan | Press any key on keyboard |
| Autoscan Beep | Scroll Lock + Scroll Lock + B |
Auto-scan mode will be suspended if the switch detect a any keyboard or mouse activity. When the activity ceases, auto-scan will resume. The auto-scan default setting is 5 seconds.
Installation
This section will guide you through the installation of your DVI KM switch. Please read through this section carefully and complete each step in the order listed.
Connecting Your Console
- Make sure all devices are turned of f and unplugged.
- Plug your PS/2 keyboard into the purple mini-DIN-6-port located on the back of the switch.
- Plug your PS/2 mouse into the green mini-DIN-6-port located on the back of the switch.
- Plug your monitors into the DVI monitor post. (Monitor A and Monitor B) located on the left side of the back of the switch.
Connecting Your Computers
- Make sure all devices are turned of f.
- Plug the single connector into one of the PC ports on the back of the switch.
- Plug your PC's monitor into the DVI port on the back of the switch.
- Plug your PC's keyboard into the purple keyboard port on the back of the switch.
- Plug your PC's mouse into the green mouse part on the back of the switch.
- Repeat steps 2 to 5 for each computer you want to connect to the switch.
- Power up the connected computers.
- After the computers are powered up, the keyboard and mouse will be recognized.
- You can now operate the DVI KVM switch.
NOTE: You can hot plug additional computers to the switch any time after the initial power up.
Brand : StarTech.com
Model : SV221DVIDD
Category : KVM switch