IPRPT - Video camera Speco Technologies - Free user manual and instructions

Product Type	Gigabit Ethernet Repeater
Model	IPRPT
Supported Network Bandwidth	10/100/1000 Mbps (Auto-detection)
Transmission Distance per Unit	393 ft (120 m) over CAT5e cable
Chainable	Yes, up to 3 units (with bandwidth reduction)
Ports	2 x RJ45 (Input + Output)
Power Interface	1 x ∅ 2.5mm DC Jack
Power Supply	DC 5V, 500 mA (included)
Power Consumption	0.9W (180 mA max)
Surge Protection	8kV (contact) / 15kV (air)
Operating Temperature	32°F to 149°F (0°C to 65°C)
Package Contents	1x IPRPT, 1x DC5V power adapter, 2x screws
Dimensions	Approx. 3.5 x 2.5 x 1 inches (estimated)
Weight	Approx. 0.2 lbs (estimated)
LED Indicators	Power LED
Cable Required	CAT5e or greater
Maintenance	Clean with dry cloth; avoid moisture and dust
Security Features	Built-in surge protection
Installation	Plug and play; screw mount available

Frequently Asked Questions - IPRPT Speco Technologies

How far can the IPRPT extend an Ethernet signal?

Each IPRPT extends the signal up to 393 feet (120 meters) over CAT5e cable.

Can I chain multiple IPRPT units?

Yes, you can chain up to 3 IPRPT units for longer distances, though bandwidth may decrease with each added unit.

What type of cable is required?

Use CAT5e or higher Ethernet cable for optimal performance.

Does the IPRPT support PoE?

No, the IPRPT requires an external DC 5V power adapter (included). It does not support Power over Ethernet.

What are the LED indicators on the IPRPT?

The device has a Power LED that indicates when the unit is powered on.

Is the IPRPT compatible with 10/100/1000 Mbps networks?

Yes, it supports 10/100/1000 Mbps with auto-detection.

Does the IPRPT provide surge protection?

Yes, it includes built-in 8kV (contact) and 15kV (air) surge protection.

How do I install the IPRPT?

Simply connect the IPRPT between two Ethernet cables using the RJ45 ports, attach the power adapter, and screw the unit in place if desired. No configuration needed.

What is the power consumption of the IPRPT?

It consumes 0.9W (180 mA max) at 5V DC.

Can I use the IPRPT outdoors?

The IPRPT is designed for indoor use with an operating temperature range of 32°F to 149°F (0°C to 65°C). Avoid exposure to moisture.

USER MANUAL IPRPT Speco Technologies

IP Repeater

User Manual

Model: IPRPT

Gigabit Ethernet Repeater

User Manual

IPRPT

Introduction

IPRPT is a compact Ethernet repeater that can use cost-effective CAT5e (or greater) cable to extend an IP signal for an extra 393' (120M), with bandwidth up to 1000Mbps. Additionally, IPRPT is chainable. You can get an additional 393' (120M) transmission distance for each IPRPT added.

Features

• Ethernet signal extension up to 393' (120M) over CAT5e cable.
  • Bandwidth up to 1000Mbps.
• Chainable with multiple IPRPT for longer distances. (Up to 3, with a loss of bandwidth)
  • Built-in 8kV (Contact) 15kV (Air) surge protection.

Installation view

Point to point IP extension

graph LR
    A["IP Camera"] --> B["CAT5e"]
    B --> C["IPRPT"]
    C --> D["CAT5e"]
    D --> E["NVR"]

Chainable IP extension

graph LR
    A["IP Camera"] --> B["CAT5o"]
    B --> C["IPRPT"]
    C --> D["CAT5o"]
    D --> E["IPRPT"]
    E --> F["CAT5o"]
    F --> G["IPRPT"]
    G --> H["CAT5o"]
    H --> I["NVR"]

User Manual

IPRPT

Panel View

No.	Interface Function
1	RJ45 Connector To connect with networking devices
2	Power Jack To connect with DC5V 500 mA power adapter
3	Power LED Indication To Indicate the power status

RJ45 Pinout

User Manual

IPRPT

Package Includes

No	Item	Quantity
1	IPRPT	x 1
2	DC5 V 500mA Power Adapter	x 1
3	Screw set	x 2

Specification

ITEM NO. IPRPT
Support
Network Bandwidth 10/100/1000Mbps (Auto-detection)
Transmission Distance 393' (120M)
Ports & Interfaces
Input 1 x RJ45
Output 1 x RJ45
Power Interface 1 x ∅ 2.5mm DC Jack
Power
Power Supply DC 5V 500mA Regulated
Power Consumption 0.9W 180mA (Max)
Ambient Temperature
Operation 32 to 149°F (0 to 65	°C)