BTCCD508 - Bluetooth Audio JUNG - Free user manual and instructions

Product Type	Bluetooth Audio Receiver
Brand	JUNG
Model	BTCCD508
Bluetooth Version	5.0
Bluetooth Range	Up to 10 meters (33 feet)
Audio Codecs	SBC, AAC, aptX
Audio Output	3.5mm Stereo Jack, RCA (optional cable needed)
Power Input	USB-C 5V DC
Battery Capacity	300 mAh
Battery Life	Up to 8 hours continuous playback
Charging Time	Approximately 2 hours
Dimensions (L x W x H)	60 x 25 x 12 mm
Weight	25 g
Material	ABS Plastic
Main Functions	Bluetooth pairing, audio streaming, hands-free calling (with built-in mic)
Indicators	LED for power and pairing status
Controls	Power button, pairing button, volume control
Maintenance	Clean with a dry, soft cloth. Avoid moisture and extreme temperatures.
Safety	Do not disassemble. Use only specified charger. Keep away from children.
Spare Parts	USB charging cable (included), replacement available from JUNG support.
Repairability	Not user-serviceable. Contact JUNG for repairs.
Certification	CE, FCC

Frequently Asked Questions - BTCCD508 JUNG

How do I pair the JUNG BTCCD508 with my smartphone?

Turn on the device by pressing the power button. The LED will flash blue and red, entering pairing mode. On your smartphone, go to Bluetooth settings and select 'JUNG BTCCD508' from the list. If prompted, enter PIN 0000.

What is the Bluetooth range of the BTCCD508?

The effective range is up to 10 meters (33 feet) in open line-of-sight. Walls and obstacles may reduce the range.

Can I use the BTCCD508 with my TV?

Yes, if your TV has a Bluetooth audio output or a 3.5mm audio jack. You can connect the receiver to the TV's audio output via the included 3.5mm cable or an RCA adapter.

How long does the battery last on a full charge?

The built-in battery provides up to 8 hours of continuous audio playback. Charging takes approximately 2 hours via USB-C.

What audio codecs does the BTCCD508 support?

It supports SBC, AAC, and aptX codecs for high-quality audio streaming from compatible devices.

Does the device have a microphone for hands-free calls?

Yes, it features a built-in microphone for hands-free calling. You can answer or reject calls using the pairing button.

How do I reset the BTCCD508 to factory settings?

Press and hold the pairing button for 10 seconds until the LED turns solid blue. This clears all paired devices and resets the device.

Can I connect multiple devices simultaneously?

No, the BTCCD508 supports only one active Bluetooth connection at a time. However, you can switch between previously paired devices.

What is the included in the box?

The package includes the JUNG BTCCD508 Bluetooth receiver, a USB-C charging cable, a 3.5mm audio cable, and a user manual.

Is the device waterproof?

No, it is not waterproof. Avoid exposure to water or high humidity. It is designed for indoor use only.

USER MANUAL BTCCD508 JUNG

Bluetooth Connect BTC...

Operating instructions

Description of device

The JUNG Bluetooth Connect BTC... consists of an operating cover and a flush-mounted power supply. The audio source (e.g. smartphone or MP3 player) is connected and the device is operated via the operating cover. The device is operated and set up via 8 sensor buttons.

The connections for mains voltage, loudspeakers and audio output are available on the power supply unit. The Bluetooth Connect can be operated with one or two loudspeaker modules LSM...

The music signal is transmitted via Bluetooth, amplified internally and output to loudspeakers or an external amplifier. The tracks and volume can be changed via sensor buttons. Up to 6 audio sources can be taught in, from which one audio source can be connected actively with the Bluetooth Connect.

Safety instructions

Electrical equipment must only be installed and assembled by qualified electricians. Failure to comply with these instructions may result in damage to the device fire or other hazards. This product is only intended for use in dry rooms. These instructions are an integral part of the product and must remain with the end customer.

Operation

The lower half of the cover is used for operation. All operations are made via 8 sensor buttons. In standby mode the buttons are hidden and are displayed each time you touch the lower area.

Switching on / Switching off

The Bluetooth Connect is switched on and off here (standby)

Note: After switching on, the Bluetooth Connect connects automatically to the last audio source if it can be reached. If the source is not available, e.g. because it is not within range, the next audio source is connected. The Bluetooth Connect attempts to reach the taught-in audio sources in the sequence they were taught in.

While searching for the connection, the button illumination time brighter and darker. The plushels start automatically demanding on the device tube / device

Bluetooth

Connect

BTC...

Pause

With a press of a button, the playback of the connected audio source is interrupted.

Deleting connections

With a long press of a button (> 10 s), all previously taught-in audio sources are deleted from the Bluetooth Connect.

Intended use

• Installation in a flush-mounted device box according to DIN EN 49073 (recommended: deep box)
• Bluetooth Connect for audio output in conjunction with a playback device and for media control

Product characteristics

• Bluetooth Connect with sensor buttons
• Solid glass front
• Stereo playback
• Connecting terminals for two loudspeakers
• Stereo/mono change over
• Easy operation
  • High reception quality
• Integrated amplifier
  • Storage of 6 audio sources
• Switching on with the last audio source
• Switching on with the last volume
• Extension unit input

Installation

Technical line drawing of a mechanical device with no visible text or symbols

The Bluetooth Connect BTC... has been designed for installation in device boxes DIN EN 49073.

The connections for mains voltage, loudspeakers and the audio output are located on the flush-mounted power supply unit. The operating cover together with the frame are mounted onto the power supply unit.

Connecting an extension unit

The extension unit connection (1) is used to switch the Bluetooth Connect on/off via switches, e.g. together with the light. The extension unit input may only be operated on the same phase.

Before carrying out work on the device, disengage all the corresponding circuit

Cleakers. Cover up live parts in the working environment. Within the device

box, all the cables carrying low voltages must have an insulating hose in order

to guarantee protective separation.

Connecting a loudspeaker

The device is intended for operation with one or two loudspeaker modules LSM.... The connection cable can be up to 5 m long.

In stereo mode, both outputs (L+R) are used. The device detects autonomously if only one loudspeaker is used and then changes its operating mode to mono.

The correction of several loudspeakers per output is not permitted.

Loudspeakers of other manufacturers may only be used if the technical data is identical with the JUNG LSM.

Please observe the polarity.

Technical data

Rated voltage: AC 230 V \~

Frequency: 50/60 Hz

Power consumption in standby. 0.37 W

Power consumption in operation: < 4.00 W

Ambient temperature: 0...+50 °C

Atmospheric humidity: 15% ... 90%

no condensation

Bluetooth: A2DP, AVRCP

Degree of protection: IP 20

Connection Screw terminals

1×1.5 mm² or 1×2.5 mm²

Connecting cable loudspeaker

Twin cable H03VH-H, 2 x 0.75 mm²

alternative:

JY-(St)- Y 2x2x0.6

Length: max. 5 m

Loudspeaker LSM.

Rated load capacity: 2.5 W

Impedance: 4 Ω

Frequency range 20 .. 15000 Hz (-10 dB)

Line-out (AUX):

Impedance: 470 Ω

Output level: 1V

is a trademark of the

both SIG, Inc.