GVW420L - Dishwasher Pelgrim - Free user manual and instructions

Product Type	Dishwasher
Brand	Pelgrim
Model	GVW420L
Energy Efficiency Class	A++
Annual Energy Consumption	262 kWh/year
Number of Place Settings	12
Height	85 cm
Width	60 cm
Depth	60 cm
Weight	Approximately 40 kg
Power Supply	220-240 V, 50 Hz
Power Consumption	2000 W
Water Pressure	0.03-1.0 MPa
Noise Level	44 dB(A)
Water Consumption per Cycle	12 L
Drying Efficiency	Class A
Number of Programs	6
Delayed Start	Yes, up to 24 hours
Electronic Controls	LED display with buttons
Safety Features	Child lock, leak protection
Installation Type	Built-in or freestanding
Color	White

Frequently Asked Questions - GVW420L Pelgrim

How do I reset the Pelgrim GVW420L dishwasher?

Press and hold the Start/Reset button for 3 seconds to cancel a cycle and reset the appliance.

What should I do if the dishwasher does not start?

Check that the door is fully closed, the power cord is plugged in, and the water supply is turned on. Also ensure the child lock is not activated.

How can I clean the filters in the GVW420L?

Remove the lower rack, unscrew the cylindrical filter, and rinse it under running water. Also remove the flat filter and clean it. Do this monthly for optimal performance.

Why is my dishwasher leaving water spots?

Use rinse aid and adjust the dosage. Also ensure the water softener is set correctly for your water hardness level.

What detergent should I use?

Use a quality dishwasher detergent (powder, gel, or tabs). Avoid using regular dish soap, as it causes excessive suds.

How do I activate the child lock?

Press and hold the Delay button for 3 seconds until the indicator lights up. Repeat to deactivate.

What is the maximum load capacity?

The GVW420L holds 12 place settings. Load dishes according to the basket layout guide in the manual for best cleaning.

Why is the dishwasher noisy?

Check if dishes are properly stacked and not blocking the spray arms. Also ensure no small items have fallen into the filter area.

How do I install the dishwasher?

Ensure it is placed on a level floor. Connect the water supply to a cold water tap (3/4 inch thread) and the drain hose to the sink drain. Electrical connection must be by a qualified electrician.

What does the error code E15 mean?

E15 indicates a water leak. The anti-flood system has activated. Turn off the water supply, unplug the appliance, and drain any residual water before calling service.

USER MANUAL GVW420L Pelgrim

ENERG

енергия · ενεργεια

| Pelgrim ||

GVW420L

ENERGIA · ЕНЕРГИЯ · ЕНЕРГЕІА ENERGIJA · ENERGY · ENERGIE ENERGI

262 kWh/annum

2010/1059