KA15KETSTBA - Aaaa Kogan - Free user manual and instructions

USER MANUAL KA15KETSTBA Kogan

White kitchen kettle with control buttons and temperature/temperature labels (no readable text beyond branding)

Double Wall Stainless Steel Kettle

with Temperature Control

KA15KETSTBA

Safety & Warnings

WARNING: Improper use may lead to injury. Hot surfaces may remain hot after use.

When using electrical kettles, basic safety precautions should always be followed, including the following:

• Read all instructions before use and retain this user guide.
• Avoid touching hot surfaces; use the provided handle.
• To prevent fire, electric shock, and injury, do not immerse the cord, plug, base, or kettle in water or any other liquid.
• Never leave the kettle unattended during use. Close supervision is required when using this kettle near or by children.
• Unplug the kettle when not in use, when the kettle is empty, during filling, when moving, and before cleaning. Allow it to cool before putting on or removing parts or before cleaning.
• Do not operate the kettle with a damaged cord or plug or after any malfunction or damage. Cease use immediately and contact help.Kogan.com for support.
• Use only the base provided. Using attachments not recommended by Kogan.com may result in fire, electric shock, or injury.
• Do not use outdoors.
• Avoid letting the cord hang over the edge of a table or counter or touch hot surfaces.
• Operate the kettle on a flat surface. Do not place it on or near a hot gas or electric burner, in a heated oven, or on top of other kettles.
• Use the kettle only for its intended purpose.
• Avoid circuit overload; do not operate another high-wattage appliance on the same circuit.
• Do not fill the kettle while on the base. Ensure the bottom is dry before placing it back onto the base.
• Take care with steam emitted from the spout or lid, especially during refilling. Do not remove the lid during the brewing cycle.
• Only heat water in the kettle.

• Do not fill above the 'max' marking, and ensure water is above the minimum mark. Overfilling may cause boiling water to be ejected.

• Do not insert objects into any slots or openings of the kettle.

• Open the lid using the release button only and push it down to lock in place.
• Scalding may occur if the lid is removed during the brewing cycle.
• If the cord is damaged or if the kettle operates intermittently or stops working, cease use immediately and contact help.Kogan.com for support.
• This kettle can be used by children aged 8 and older, and by individuals with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge if supervised or instructed on safe use.
  • Children should not play with the kettle.
• Cleaning and user maintenance must not be performed by children under 8 without supervision.
• Keep the kettle and its cord out of reach of children under 8.
  • This kettle is intended for household and similar uses, including:
  • Staff kitchens in shops, offices, and other working environments.
• Farmhouses.
• By guests in hotels, motels, and other residential settings.
• Bed and breakfast settings.
• Warning: Avoid spillage on the power base.
• Do not operate the kettle on an inclined plane.
• Do not operate the kettle unless the element is fully immersed.
• Do not move the kettle while it is switched on.

Overview

Lid Spout Lid Release Button Handle Control Panel 40°C 60°C 80°C 90°C 100°C WARM START 3STOP TEMP Base

Operation

Before First Use

For first-time use or after a long period of inactivity, fill the kettle to the maximum level with fresh tap water, boil, and empty it at least twice to remove any small particles. Do not consume this water.

Powering the Kettle

• Insert the power plug into an electrical outlet to turn the kettle on. All indicators illuminate for one second, then turn off.
• Once plugged in, pressing the 'START/STOP' button will cause the 'Temperature' indicators to flash for 3 seconds before the kettle begins boiling.
  • Once boiling is complete, the kettle turns off, and all indicators turn off.

Using the Kettle

1. Press the 'Lid Release' button on the handle to open the lid.
2. Remove the kettle from the base, fill it with the desired amount of water (no less than the minimum and no more than the maximum), secure the lid, and place the kettle back on the base.
3. Plug the kettle into an electrical outlet (220-240V\~). The buzzer will emit a long beep, and the display will illuminate fully for about 1 second before entering standby mode, displaying the current water temperature.
4. Follow the button function instructions to select the appropriate temperature setting.
5. After boiling, lift the kettle from the base and pour the water into a container.

Set Temperature Boiling with Keep Warm Function

• After powering on, press the 'TEMP' button. The 'WARM' indicator will flash.
• Repeatedly press the 'TEMP' button to set the desired temperature ('40°C' - '60°C' - '80°C' - '90°C'). The selected temperature indicator will remain on.
• After selecting the temperature, press 'START/STOP' to begin. The 'WARM' indicator remains illuminated during the process.
• If the water temperature is below the set level, the selected 'Temperature' indicator will flash. Once it reaches the set temperature, the indicator stays on, and the kettle enters a 2-hour keep-warm state before switching off automatically.
• If a temperature is selected but 'START/STOP' is not pressed, the kettle will turn off after 30 seconds.
• During the boiling or keep-warm cycle, if you select a new temperature, the kettle returns to the temperature selection mode. Press 'START/STOP' to confirm.
• During boiling, pressing 'START/STOP' will switch the kettle to off.

Keep Warm Memory

• If the kettle is lifted during the keep-warm phase, the last setting is preserved.
• If returned to the base within 2 minutes (±30 seconds), the kettle will resume the previous mode. After 2 minutes, it enters standby mode.

Cleaning & Care

• Avoid using chemicals, steel wool, or abrasive cleaners, as these can scratch and fade the surface.
  • Always unplug and allow the kettle to cool before cleaning.
• Regularly clean mineral deposits to prolong the kettle's life.
• Do not immerse the kettle in water. Wipe the exterior with a damp cloth and polish with a soft dry cloth.

Cleaning the Kettle

1. Fill the kettle with 0.5L of white vinegar and top up with water. Let sit for at least 1 hour.
2. Empty the solution, then wipe any remaining deposits with a damp cloth.
3. Fill the kettle with fresh water, bring to a boil, and discard. Repeat this step to prepare the kettle for use.
4. If necessary, repeat the above steps.

Cleaning the Scale Filter

To clean the scale filter, grasp it at the top and pull upward to remove. Rinse with clean water, dry thoroughly, and replace in the kettle.

Specifications

Rated voltage 220-240V\~ 50/60Hz

Rated power 1850-2200W

Capacity 1.5L

Dimensions

227 x 155 x 255mm

Troubleshooting

Open Circuit Temperature Sensor

The kettle will beep 10 times, and the 40^ C and 60^ C indicators will flash. Disconnect the kettle from the power, then reconnect and power it on again.

Short Circuit Temperature Sensor

The kettle will beep continuously, and the 80^ C and 90^ C indicators will flash. Disconnect the kettle from the power, then reconnect and power it on again.

Disposal

This marking indicates that this kettle should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

Notes

The Ground Truth image displays a single, solid horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a placeholder fill-in-the-blank area. Since the OCR output incorrectly rendered a stylistic line as underscores (which should be ignored), this violates the rule. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
[EMPTY]
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
[NO TEXT]
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The OCR content provided is "", which consists of no characters. Since the OCR output correctly ignores the background/stylistic line and produces no actual text, it complies with the “Stylistic/Background Lines (Ignore)” rule. Therefore, the OCR result is consistent with the Ground Truth.
[Non-Text]
[Non-Text]
____
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The OCR content provided is "", which consists of no characters. Since the OCR output correctly ignores the background/stylistic line and produces no actual text, it complies with the “Stylistic/Background Lines (Ignore)” rule. Therefore, the OCR result is consistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), if the GT contains lines used for stylistic emphasis or as background elements (like ruled paper), the OCR result must ignore them. The line in the GT is clearly a stylistic/background line, not a placeholder for text. Therefore, the OCR should not have output any underscores. Outputting `____` constitutes an error under Rule 2, as it hallucinates placeholder symbols where none are semantically intended. Hence, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, solid horizontal line, which is a stylistic or background element (like a ruled paper line or separator), not a placeholder for text. According to Rule 2, such stylistic/background lines must be ignored by the OCR result. The OCR content provided is "", which consists of no characters. This correctly represents the absence of any textual content in the GT and correctly matches the visual line as a stylistic element. Therefore, the OCR output should have been empty or omitted this line entirely.
[Non-Text]
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated placeholder underscores where none exist in the GT. Hence, the result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated placeholder underscores where none should exist in the GT. Hence, the OCR result is inconsistent with the Ground Truth.
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a fill-in-the-blank placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), if the GT contains lines used for stylistic emphasis or as background elements (like ruled paper), the OCR result must ignore them. The line in the GT is clearly a stylistic or background line, not a placeholder for text. Therefore, the OCR should not have output any underscores. Outputting `____` constitutes an error under Rule 2, as it hallucinates placeholder symbols where none are semantically intended. Hence, the OCR result is inconsistent with the Ground Truth.

[Non-Text]

The Ground Truth image displays a single, solid horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
[EMPTY]
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
[NO TEXT]
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
____
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The OCR content provided is "", which consists of no characters. Since the OCR output correctly ignores the background/stylistic line and produces no actual text, it complies with the “Stylistic/Background Lines (Ignore)” rule. Therefore, the OCR result is consistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), if the GT contains lines used for stylistic emphasis or as background elements (like ruled paper), the OCR result must ignore them. The line in the GT is clearly a stylistic/background line, not a placeholder for text. Therefore, the OCR should not have output any underscores. Outputting `____` constitutes an error under Rule 2, as it hallucinates placeholder symbols where none are semantically intended. Hence, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, solid horizontal line, which is a stylistic or background element (like a ruled paper line or separator), not a placeholder for text. According to Rule 2, such stylistic/background lines must be ignored by the OCR result. The OCR content provided is "", which consists of no characters. This correctly represents the absence of any textual content in the GT and correctly matches the visual line as a stylistic element. Therefore, the OCR output should not contain any underscores or line representations. Outputting underscores for a stylistic line violates the rule and constitutes an error.
[Non-Text]
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder and violates the rule that stylistic lines must be ignored. The OCR has hallucinated text (underscores) where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated placeholder underscores where none should exist in the GT. Hence, the OCR result is inconsistent with the Ground Truth.
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), if the GT contains lines used for stylistic emphasis or as background elements (like ruled paper), the OCR result must ignore them. The line in the GT is clearly a stylistic/background line, not a placeholder for text. Therefore, the OCR should not have output any underscores. Outputting `____` constitutes an error under Rule 2, as it hallucinates placeholder symbols where none are semantically intended. Hence, the OCR result is inconsistent with the Ground Truth.

[Non-Text]

Need more information?

We hope that this user guide has given you the assistance needed for a simple set-up.

For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.Kogan.com.

kogan.com