Smart Steps Jammin' Gym - Unspecified Baby Trend - Free user manual and instructions

USER MANUAL Smart Steps Jammin' Gym Baby Trend

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND FOR REPLACEMENT PARTS, SERVICE AND REPAIR.

The Baby Trend® warranty covers workmanship defects within the first 180 days of purchase. Any product which has been subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration or accident, or has had its serial number altered or removed invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user. The Customer Service Department can be contacted at 1 [phone] Monday through Friday between 8:00am and 4:30pm (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Warranty only valid in North America.

SMART STEPS™ by babytrend®

Baby Trend, Inc. 13048 Valley Blvd. Fontana CA 92335 1-800-328-7363 (8:00am \~ 4:30pm PST) www.babytrend.com

Read all instructions BEFORE assembly and USE of product.

KEEP INSTRUCTIONS FOR FUTURE USE.

Line drawing of a children's climbing device with limbs and feet (no text or symbols)

PT03D58A

Jammin' Gym with Play Mat

Instruction Manual

Strings can cause STRANGULATION!

• DO NOT place items with a string around child's neck, such as hood strings or pacifier cords.
• DO NOT suspend strings over product or attach strings to toys. To prevent entanglement injury, never place the Play Gym in a crib or playpen. Never add strings, ties or other products to the Play Gym.

FALL HAZARD!

Babies can FALL from unit resulting in head injuries.

• NEVER leave child unattended. Always keep child in view while in product.
- NEVER use near stairs, stoves or ovens, heaters, fireplaces, swimming pools, or other dangerous areas. To avoid tip over, place product on a flat, level surface.
- NEVER lift this product with your child in it.
- NEVER place product on counter tops, tables, or any other elevated surface.
- ALWAYS Ensure that all frame parts are completely locked, refer to page 5 for instructions. Check that all pin connections on the Play Gym are secured properly.
• ALWAYS make sure the fasteners (ropes, straps, clips, etc.) are securely fastened on the Play Gym.
- ALWAYS use parts provided by the manufacturer, never substitute any parts with items not provided by the manufacturer.
- Keep ALL packaging out of reach from children.

Do not use the Play Gym if it is damaged or broken.

The Play Gym is designed to be used only by infants at least 3 months of age. Discontinue to use the Play Gym when the child reaches 36 months of age.

Discontinue use should any part become damaged. Please contact our customer service at 1-800-328-7363 to order replacement parts or arrange for repairs.

Read all instructions before assembly and use of the Play Gym.

IMPORTANT! To ensure safe operation of your product, please follow these instructions carefully. Please keep these instructions for future reference.

IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. NEVER use if any parts are missing or broken.

IMPORTANT! Adult assembly is required.

MAINTENANCE

Care / Maintenance

• MACHINE WASHABLE MAT. Wash the mat separately in cold water on the gentle cycle. Do not use bleach. Tumble dry on low heat.
• The arched bars, hard toys, mirror, bases and frames can be wiped with a clean, damp cloth.
• DO NOT MACHINE WASH. The arched bars, toys and plastic parts, use only lukewarm water and mild soap.

Check that you have all the parts for this model before assembling the Play Gym.

Assembled Parts Diagram Step 6

Four identical vertical bars with circular base supports at the bottom, no text or symbols present.

Play Gym Legs (x4)

Simple line drawing of a bread loaf outline (no text or symbols)

Padded Mat

Central Frame

Line drawing of two mechanical components with floral-like top surfaces (no text or symbols)

Side frames (x2)(T) Shape connectors

* Assembled 4pc toy and bar #1

* Not - Assembled 4pc toy and bar #2

* Rattle and strap #2* Rattle and strap #1 * Rattle and strap #:
* Toys may vary

BABY TREND CUSTOMER SERVICE

The Customer Service Department can be contacted at 1 [phone] Monday through Friday between 8:00am and 4:30pm (PST). Return

Authorizations are required prior to returning product(s) to Baby Trend®. Warranty only valid in North America.

TOP FRAME CONNECTION

• Insert each side frame into the central frame (Fig. 1a). NOTE: Ensure that they click into position. Slide the lock outward on both sides to secure the side frames (Fig. 1b).

Illustration of two figures carrying a large cylindrical object, with arrows indicating direction (no text or symbols)

• After locking the frames, check that both side frames are secure by gently pulling away from central frame (Fig. 1b). NOTE: These parts do not separate when lock is correctly engaged.

Lock both latches

Fig. 1b

BAR AND LEGS

• Position the (T) shape connectors over the top leg angled as shown in (Fig. 2a). Slide a connector to the second locking pins and secure in place. Continue steps for all other legs until complete. Ensure the small tubes on the connectors point up and all pins click into position.

- Complete each (T) shape connectors attachment onto each leg and set them as shown in (Fig. 2b). Follow the diagram on (Fig. 2c - Fig.2d) to insert each side toy bar.

Small tube pointed up A less appropriate is

Fig. 2a

Pins in

Fig. 2b

- Not - Assembled Toy Bar: Pressing the pins, insert the toys into the bar as seen in (Fig. 2c).

• Assembled Toy Bars: Pressing the pins, insert the toy bar to the first pair of legs. Repeat for the second toy bar (Fig. 2d).

- Pressing the top pins insert each pair of legs to the side frames attached to each side of the central frame (Fig. 2e).

Insert toy bar

Fig. 2d
NOTE: Face the toys outward or inward when completing the frame assembly. All pins must click into position.

Side 1 Pins in Side 2 Pins in

Fig. 2e

ASSEMBLYAS

ATTACHING THE TOYS

• Use the straps attached to the toys to thread them through the open slots of the central frame (Fig. 3a).
• Undo the strap hook and loop for toy threading (Fig. 3b).
  • Face the toys to front of the central frame assembly, thread strap and toy through the slot as desired (Fig. 3c).

NOTE: Always use the hook and loop to secure the toy onto the central frame.

Diagram showing a guitar being inserted into a cloud device (no text or symbols present)

Fig. 3a

Three cartoon illustrations of a character with arrows indicating movement or change, showing different body positions (no text or symbols)

Fig. 3b

Simple line drawing of three cartoon objects hanging from a platform, with arrows indicating movement (no text or symbols)

Fig. 3c

• To adjust the rattle toys: undo the hook and loop on the strap (Fig. 3d). Remove the strap with toy rattle from the central frame. Rethread the strap through the slots to reconfigure the toys. (Fig. 3e). NOTE: Always use the hook and loop to secure the toy onto the central frame.

Simple line drawing of a guitar with a handle and two pins, enclosed in a circle (no text or symbols)

Fig. 3d

Illustration of a robotic arm with three sensors and directional arrows indicating motion (no text or symbols)

Fig. 3e

PLACE THE PADDED MAT

WARNING: Never leave child unattended. Always keep child in view while in product. NEVER put child under the mat.

• Center the padded mat between the frame legs and under the frame assembly (Fig. 4). NOTE: Padded mat may be used without the frame and toy assembly.

Diagram of a climbing device with a blue arrow indicating upward motion (no text or symbols)

Fig. 4

ASSEMBLED VIEW AND PARTS

- Use the diagram to see parts and locations. Use the list to identify parts for set up and disassembly.

A. Central Frame
B. Side Frame
C. Leg
D. Connector
E. Toy Rattle / Strap
F. Toy Bar
G. Padded mat

- For assembly or to disassemble assistance see (Page 3) to contact customer service.

A B C D E F G

TO DISASSEMBLE ATTACH / REMOVE TOYS

TO DISASSEMBLE FRAME

- Unlatch the left latch to the right and the right latch to the left. Listen for the latch to disengage. Pull the 2 side frames away from the central frame (Fig. 5a).

• Press in the pins on the side frames to release the each leg with attached toy bar from the framing. Press the pins on each side of the toy bars to release them from the legs.
  • (T) shape Connector removal is optional: Press the pins and remove each connector from each leg.

Unlock both latches Fig. 5a

Pins in

Fig. 5b

graph LR
    A["Start"] --> B["Mechanical Component"]
    B --> C["Optional"]
    style A fill:#f9f,stroke:#333
    style C fill:#bbf,stroke:#333

Fig. 5c

TOY ATTACHMENT STRAP

- Use hook and loop to attach or remove toys (Fig. 7).

Illustration of three cartoon characters interacting with a cloud-like structure, no text or symbols present

Fig. 7

9

Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.

10

Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.