MAAL1193 - Unspecified JUNG - Free user manual and instructions

Brand	JUNG
Model	MAAL1193
Product Type	Multimedia Connection System (flush-mount)
Connector Types	Cinch Audio, S-Video, USB, TRS 3.5 mm, VGA, HDMI, Composite Video, DVI
HDMI Standard	HDMI 2.0a, supports 4K @ 50/60 Hz, Full HD 3D, HDR
USB Standard	USB 2.0 High Speed
VGA Resolution	800 x 600 to 1280 x 1024 pixels
Installation Depth	Varies by connector: Cinch 14 mm, TRS 14 mm, Composite Video 14 mm, VGA 5 mm, HDMI 25 mm, USB 27 mm, DVI 17 mm
Mounting	Flush-mount in wall box according to DIN VDE 0606
Indoor Use Only	Yes
Ambient Temperature	-5 to +45 °C
Contact Material	Gold-plated (for most connectors)
Insertion Cycles	≥ 1000 for Cinch, Composite, S-Video; ≥ 2000 for TRS; ≥ 500 for VGA; ≥ 1000 for DVI
Safety Instructions	Installation only by qualified electricians; observe minimum 0.3 m distance from power cables and interference sources
Maintenance	No specific instructions; keep dry and clean
Warranty	Statutory provisions; return to ALBRECHT JUNG GMBH & CO. KG Service-Center

Frequently Asked Questions - MAAL1193 JUNG

Is the MAAL1193 suitable for outdoor use?

No, the multimedia connection system is designed for indoor use only. It must be installed in a dry environment.

What cable types are compatible with the MAAL1193?

The system supports a wide range: Cinch Audio, S-Video, USB, 3.5 mm TRS, VGA, HDMI, Composite Video, and DVI. Use only standardised connecting cables to avoid malfunctions.

Can I connect a 4K TV to this multimedia connection system?

Yes, the HDMI port supports HDMI 2.0a with 4K @ 50/60 Hz, including HDR. Ensure your TV and source device are 4K-compatible.

What is the minimum distance from power cables?

To avoid interference, maintain a minimum distance of 0.3 m from current-carrying cables and sources of interference like electronic ballasts or dimmers.

How do I install the MAAL1193?

Installation must be performed by a qualified electrician. Use a suitable wall box (e.g., Kaiser Electronics Box) and connect the cables via the rear jacks. Then screw the insert, mount the centre plate, and attach the frame.

Why is there no video signal after connecting?

Check that the playback device is switched on and that all connections are secure. If using VGA, ensure the source's VGA output is activated. For HDMI, manually select the correct input on the TV.

Why is there no audio signal?

Check the volume levels on both the source and playback device. Ensure the mute function is disabled. If using Cinch, confirm the correct audio output is selected.

What is the maximum cable length for proper signal transmission?

The manual does not specify exact lengths but states that proper signal transmission requires using appropriate accessories and observing the minimum 0.3 m distance from interference sources. Follow manufacturer guidelines for your cables.

Can I use the MAAL1193 with multiple connectors simultaneously?

Yes, the system is designed to connect various input and output devices. However, the functionality depends on the connected devices. Ensure each cable is inserted straight without force to avoid damaging contacts.

How do I clean the multimedia connection system?

The manual does not provide specific cleaning instructions. Use a soft, dry cloth to remove dust. Avoid using liquids or abrasive cleaners as they may damage the connectors.

USER MANUAL MAAL1193 JUNG

Operating Instructions Multimedia connection system

Close-up of a white electrical outlet with three gold and red connectors, no visible text or symbols.

1. Safety instructions

Electrical equipment must only be installed and assembled by qualified electricians.

Always follow the relevant accident prevention regulations.

Failure to comply with these instructions may result in damage to the device, fire or other hazards.

Proper signal transmission is only ensured when the appropriate accessories are used and the specified maximum cable lengths are observed, as well as the minimum permissible distance of 0.3 m from current-carrying cables and sources of interference (electronic ballasts, dimmers, ESLs, etc.) are observed.

These operating instructions are an integral component of the product, and must be retained by the end user.

2. Function

The multimedia connection system serve to connect input and output devices for transmission of audio/video signals and data.

① The available functions depend on the devices that are connected. To select the suitable socket, note the information from the manufacturer of the connected devices.

Intended use

• Only suitable for use in indoor areas
• Can be used in multiple combinations
• Flush-mounting in wall box according to DIN VDE 0606
• Connection of audio/video devices via „Plug & Play“

3. Operation

CAUTION!

The use of non-standardised connecting cables and connectors can cause device malfunctions.

The devices may be destroyed.

Use only approved connecting cables and connectors.

3.1. Connecting multimedia devices

• Insert connector of the connecting cable from the signal source, e.g. from a DVD or MP3 player, into the jack of multimedia socket.
• Insert connector of the connecting cable from a playback device, e.g. from an LCD/plasma television or stereo system, into the jack of a second multimedia socket.

① Insert connectors into the jacks straight and without using force. Twisting or tilting the connector may deform the contacts.

Application examples

Connection	Devices
Cinch	Audio systems, AV receivers, active loudspeakers
S-Video	SAT receivers, televisions, projectors, iPod docking stations, video cameras
USB	iPods, printers, storage media, digital cameras
TRS 3.5 mm	MP3 players, CD/DVD players, sound cards, audio systems
VGA	PCs/laptops, projectors, monitors
HDMI	High definition plasma/LCD televisions, SAT receivers, projectors, game consoles, DVD/Bluray players, DVD/HDD recorders, video cameras

Information for electricians

4. Assembly

4.1. Connecting and installing the multimedia connection system

The connecting cable has been laid, the wall box is installed in the wall.

① Recommendation: use Kaiser „Electronics Box“ (Art. no. 1068-02 or 9062-74) in order to maintain the permissible bending radii.

• Insert connector of the connecting cable into the corresponding jack on the rear of the multimedia connection system.
• Screw insert to the wall box in the tight orientation via the supporting ring.
• Place centre plate into the frame.
• Mount centre plate together with the frame on the insert using screwless terminals.

The multimedia connection system can be commissioned.

5. Commissioning

CAUTION!

Short-circuit if devices that are switched on are connected.

Devices may be destroyed.

Switch all devices off before connecting them.

5.1. Carrying out a functional test

Multimedia connection system is connected.

- Activate the desired functions and check the signal transmission at the signal sources and the playback device, e.g. play a DVD and check picture/sound reproduction on a television set.

The multimedia connection system is ready for operation.

6. Appendix

6.1. Technical data

Cinch Audio

Rated voltage: DC 50 V

Frequency ranges: 20 Hz ... 20 kHz

Contact resistance: ≤ 20 mΩ

Insulation resistance: ≥ 100 MΩ

Electric strength: AC 500 V\~ (50/60 Hz) for 1 min 2 mA

Insertion and removal forces: 3 ... 25 N

Insertion cycles: ≥ 1000

Gender changer: white (left), red (right)

Contact material: gold-plated

Installation depth: 14 mm

Ambient temperature: -5 ... +45 °C

TRS 3.5 mm

Rated voltage: DC 50 V

Frequency ranges: 20 Hz ... 20 kHz

Contact resistance: ≤ 20 mΩ

Insulation resistance: ≥ 100 MΩ

Electric strength: AC 500 ... 2000 V\~

DC 800 V

Insertion and removal forces: 4.9 ... 14.7 N

Insertion cycles: ≥ 2000

Gender changer: 3.5 mm Audio Stereo, 180°

Contact material: gold-plated

Ambient temperature: -5 ... +45 °C

Composite Video

Rated voltage: DC 50 V

Frequency ranges: ≤ 160 MHz

Contact resistance: ≤ 20 mΩ

Insulation resistance: ≥ 100 MΩ

Electric strength: AC 500 V\~ (50/60 Hz) for 1 min 2 mA

Insertion and removal forces: 3 ... 25 N

Insertion cycles: ≥ 1000

Gender changer: yellow

Contact material: gold-plated

Installation depth: 14 mm

Ambient temperature: -5 ... +45 °C

Multimedia connection system

Ref.-no.: MA..

S-Video

Rated voltage: DC 50 V

Frequency ranges: ≤ 160 MHz

Contact resistance: ≤ 80 mΩ

Insulation resistance: ≥ 50 MΩ

Electric strength: AC 500 V\~ (50/60 Hz)

for 1 min 2 mA

Insertion forces: ≤ 44.1 N

Removal forces: 5.88 ... 29.4 N

Insertion cycles: ≥ 1000

Gender changer: S-Video

Contact material: gold-plated

Ambient temperature: -5 ... +45 °C

VGA

Resolution: ≥ 800 x 600 pixels

≤ 1280 x 1024 pixels

S-VGA compatible

Frequency ranges: ≤ 160 MHz

Contact resistance: ≤ 30 mΩ

Insulation resistance: ≥ 1000 M

Electric strength: AC 500 V\~ (50/60 Hz)

for 1 min 2 mA

Insertion forces: 43.9 N

Removal forces: 3.92 N

Insertion cycles: ≥ 500

Gender changer: 15pole D-subminiature, 180°

Installation depth: 5 mm

Ambient temperature: -5 ... +45 °C

HDMI

Standard: HDMI 2.0a

Support for HDMI™ technology

(HDMI High Speed)

4K @ 50/60 Hz

Full HD @ 48 Hz 3D

HDR Video

Gender changer: HDMI ^™ type A, 180°

Contact material: gold-plated

Installation depth: 25 mm

Ambient temperature: -5 ... +45 °C

USB

Standard: 2.0 High Speed

Gender changer: Type A, 180°

Installation depth: 27 mm

Ambient temperature: -5 ... +45 °C

DVI

Standard: DVI-I Dual Link (analogue + digital)

Rated voltage: AC 40 V

Frequency range: ≤ 1000 MHz

Contact resistance: ≤ 20 m

Insertion/removal cycles: ≥ 1000

Terminal: 180°

Installation depth: 17 mm

Installation note: Consider bending radius and various plug types. Ensure sufficient installation space.

6.2. Troubleshooting

No signal at the playback device after the signal sources is switched on.

Cause 1: Playback device is not switched on.

- Switch on playback device.

Cause 2: Loose connector.

- Check that all connections are properly seated.

No video signal at the playback device after the signal sources is switched on.

Cause 1: Signal source is not recognised by the playback device.

- Manual selection of the signal source using remote control or channel selection buttons of the player.

Cause 2: VGA output of the signal source is not activated.

- Activate VGA output. Note information of the device manufacturer.

No audio signal at the playback device after the signal sources is switched on.

Cause 1: Volume control on the signal source or on the playback device is set too low.

- Increase volume.

Cause 2: The audio on the playback device is set to mute.

- Deactivate the mute function. Note information of the device manufacturer.

6.3. Guarantee

Our products are under guarantee within the scope of the statutory provisions.

Please return the unit postage paid to our central service department giving a brief description of the fault:

ALBRECHT JUNG GMBH & CO. KG

Service-Center

Kupferstr. 17-19

D-44532 Lünen

Service-Line: +(49) 23 55.80 65 51

Telefax: +(49) 23 55 . 80 61 65

The CSign is a free trade sign addressed exclusively to the authorities and does not include any warranty of any properties.