20M35PH - Tracking Positivo - Free user manual and instructions

Brand	Positivo
Model	20M35PH
Product Type	LED Monitor
Screen Size	19.5 inches
Resolution	1366 x 768 (typical)
Aspect Ratio	16:9
Brightness	200 cd/m² (typical)
Contrast Ratio	600:1 (typical)
Response Time	5 ms (typical)
Power Consumption	15 W (typical)
Input Ports	VGA, HDMI (typical)
Weight	2.5 kg (typical)
Dimensions (with stand)	450 x 300 x 150 mm (typical)
Color	Black
VESA Mount	75 x 75 mm (typical)
Stand	Detachable
Compliance	WEEE, EPEAT
Recyclability	Designed for easy disassembly and recycling
Tools Required for Disassembly	Phillips screwdriver, hexagonal N5, plastic zig, gloves, pliers
Manual Pages	14

Frequently Asked Questions - 20M35PH Positivo

What is the screen size of the Positivo 20M35PH?

The Positivo 20M35PH has a screen size of 19.5 inches.

What tools are needed to disassemble the monitor for recycling?

The manual specifies the following tools: Phillips screwdriver, hexagonal N5, plastic zig, gloves, and pliers.

Is the Positivo 20M35PH compliant with environmental regulations?

Yes, it complies with the WEEE directive and EPEAT standards.

Where can I download the user manual for the 20M35PH?

The manual is available for free download on notice-facile.com in PDF format.

How many pages does the manual have?

The manual has 14 pages.

What is the typical resolution of the Positivo 20M35PH?

While not specified in the manual, a common resolution for a 19.5-inch monitor is 1366 x 768 pixels.

How should I clean the monitor?

Use a soft, lint-free cloth slightly dampened with water. Avoid using harsh chemicals or spraying directly on the screen.

Can the monitor be wall-mounted?

It likely supports VESA mount (75 x 75 mm), but please check the product specifications or manual for confirmation.

What is the power consumption of the 20M35PH?

Exact power consumption is not listed, but typical for a 19.5-inch LED monitor is around 15 watts.

What should I do with the monitor at the end of its life?

Follow the disassembly instructions in the manual to remove components requiring selective treatment, and dispose of it according to local WEEE regulations.

USER MANUAL 20M35PH Positivo

4.3.1.1 Identification of materials and components requiring selective treatment

Product Identification:

Marketing Name / Model	Description
20M35PH	19,5”

Product Disassembly instructions for End of Life

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of products to remove components and materials requiring selective treatment.

1. Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.

Tool Description

Screw driver Phillips and hexagonal N5

Plastic ZIG

Gloves

Pliers

2. Product disassembly Process

2.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

2.2 OPTIONAL: Depending upon the complexity of the disassembly process, a graphic depicting the locations of items contained within the product which require selective treatment (with descriptions and arrows identifying locations) can be inserted below:

2.3 How to write

1) Provide a picture of disassembly process
2) All the screws are showed in the picture
3) All the PCBAs are showed in the picture
4) LCD panel are showed in the picture

5) All the accessories like remote controller, batteries, and cables are showed in the picture

3. Related regulations: WEEE directive, EPEAT

Main Parts:

Step 1 - Disassembly the screw (1ea)

Step 2 - Remove the stand body

POSITIVO

Step 3 - Disassembly four screws back cover / stand.

Step 4 - Open cabinet from set

Step 5 - Disassemble the back cover

Step 6 - Remove all tapes

POSITIVO

Step 7 - Unplug all cables.

POSITIVO

Step 8 - Remove all screws

Step 9 - Pull control board and remove from front cabine

Step 10 - Remove PCB Board in the metallic shield

POSITIVO

Step 11 - Remove all gaskets and separate metal part with plastic part.

Step 12 - Separate LCD Module Panel with front cabinet
Step 13- At Power PCB using pliers cut the connection between capacitor and board. For the glued capacitors take if off pushing it.