BG-UM44-100M - Router BZBGear - Free user manual and instructions

USER MANUAL BG-UM44-100M BZBGear

18Gbps 4x4 HDBaseT (100M) Matrix with ARC Function

Front view of a black multi-chamber network device with multiple ports and control buttons (no visible text or symbols)

User Manual

Thank you for purchasing this product

For optimum performance and safety, please read these instructions carefully before connecting, operating, or adjusting this product. Please keep this manual for future reference.

Surge protection device recommended

This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.

Table of Contents

1. Introduction....1
2. Features....1
3. Package Contents....2
4. Specifications....2
5. Operation Controls and Functions....4
   5.1. Matrix Panel....4
   5.2.HDBaseT Receiver Panel....6
6. IR Remote....7
7. IR Control System....9
8. IR Cable Pin Assignment....11
9. EDID Management....11
10. Matrix Audio and RS-232 Introduction.... 13
11. Web GUI User Guide....14
12. RS-232 Control Command.... 22
13. Application Example....29
14. Warranty....30
15. Mission Statement.... 30

1. Introduction

The 18Gbps 4x4 HDBaseT (100M) Matrix can connect four HDMI sources to eight displays. It features four HDMI outputs and each HDMI output is mirrored to provide a CAT-Cable output which runs simultaneously. HDBaseT output can extend video transmission distance up to 328ft / 100m via a single cat5e/6/7 cable and the resolution is up to 4K@60Hz 4:4:4.

The product supports IR matrix and Audio matrix. With ARC function, it can return the audio signal from HDMI or HDBaseT display device to coaxial audio and analog audio outputs using Web GUI or ASCII code control. It can also extract the audio signal from HDMI source device to analog audio and coaxial audio outputs using Web GUI or ASCII code control. Moreover, the product supports bi-directional IR and RS-232 function. The product features an intuitive set of front panel controls with OLED screen as well as control via IR remote, RS-232, LAN, and Web GUI.

2. Features

☆ HDCP 2.2 and HDCP 1.4 compliant
☆ 4 HDMI inputs, 4 HDMI & HDBaseT mirrored outputs
☆ HDMI ports transmit 18Gbps lossless uncompressed video bandwidth
★ Support 18Gbps lossless compressed HDBaseT signal transmission
☆ Support 4K->1080P Down Scaler
☆ Dolby Vision, HDR10+, HLG
HDBaseT output can extend video transmission distance up to 328ft / 100 meters via a single cat5e/6/7 cable and the resolution is up to 4K@60Hz 4:4:4.
☆ HDMI audio pass-through up to 7.1CH HD audio (LPCM, Dolby TrueHD and DTS-HD Master Audio)
☆ Support ARC function on local HDMI and HDBaseT output ports
☆ IR matrix and Audio matrix
☆ Smart EDID management
☆ 24V POC on all HDBaseT ports
☆ Control via front panel buttons, IR remote, RS-232, LAN, and Web GUI

3. Package Contents

① 1x 4x4 HDMI and HDBaseT Matrix Switch
② 4x HDBaseT Receiver
③ 1x Matrix IR Remote
④ 1x 100\~240V AC 50/60Hz Power cable
⑤ 1x RS-232 serial cable (1.5 meters, male to female head)
⑥ 8x 3-pin Phoenix Connector
⑦ 5x IR Blaster cable (1.5 meters)
⑧ 6x 20\~60KHz IR Receiver cable (1.5 meters)
⑨ 10x Mounting Ear (Matrix and Receiver)
1x User Manual

1. Specifications

Technical
HDCP Compliance	HDCP 2.2 and HDCP 1.4
Video Bandwidth	18Gbps
Video Resolution	Up to 4K2K@50/60Hz (4:4:4)
Color Space	RGB, YCbCr 4:4:4/4:2:2/4:2:0
Color Depth	12-bit (4K), 16-bit (1080P)
HDMI Audio Formats(Pass-through)	PCM2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX,DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
Coax Audio Formats	PCM 2.0, Dolby Digital / Plus, DTS,
L/R Audio Formats	PCM2.0
HDR formats	4:4:4.4:2:2,4:2:0(10,12bit deep color)HDR10, HDR10+, Dolby Vision, HLG
Infrared	20KHz ~ 60KHz
ESD Protection	Human-body Model:±8kV (Air-gap discharge), ±4kV (Contact discharge)
Connection
Matrix
Input Ports	4×INPUT [HDMI Type A, 19-pin female]6×IR INPUT [3.5mm Stereo Mini-jack]2×Stereo Audio [3.5mm Stereo Mini-jack B]4×OPTIF(OPTICAL)
Output Ports	4×HDMI OUTPUT [HDMI Type A, 19-pin female]4×HDBaseT port [RJ45]5×IR OUTPUT [3.5mm Stereo Mini-jack]4×RS-232 [3-pin Phoenix connector]4×SPDIF(COAX)4×Stereo Audio [3.5mm Stereo Mini-jack]1×LAN [RJ45]
Control Ports	1×TCP/IP [RJ45]1×RS-232 [D-Sub 9]
HDBaseT Receiver
Input Ports	1×HDBaseT IN [ RJ45]1×IR IN [3.5mm Stereo Mini-jack]
Output Ports	1×HDMI OUT [HDMI Type A, 19-pin female]1×IR OUT [3.5mm Stereo Mini-jack]
Control Ports	1×SERVICE [Micro USB, Update port]1×RS-232 [Phoenix jack]2×LAN [RJ45]
Mechanical
Housing	Metal Enclosure
Color	Black
Dimensions	TX: 440mm (W)×274mm (D)×45mm (H)RX: 163mm (W)×90.3mm (D)×18mm (H)
Weight	TX: 3977g, RX: 392g
Power Supply	AC 100 - 240V 50/60Hz
Power Consumption	70W (Max)
Operating Temperature	0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature	-20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity	20~90% RH (non-condensing)
Resolution / Distance	4K60 - Feet / Meters
CAT5e/6/7	328ft / 100M
Resolution / Cable length	4K60 -Feet / Meters	4K30 -Feet / Meters	1080P60 -Feet / Meters
HDMI IN / OUT	16ft / 5M	32ft / 10M	50ft / 15M

The use of "Premium High Speed HDMI" cable is highly recommended.

5. Operation Controls and Functions

5.1 Matrix Panel

Front Panel

1 2 3 4 5 6 7 HOMI

NO.	Name	Function Description
1	OLED screen	Display matrix switching status, input / output port, EDID, Baud rate, IP Address.
2	Power LED	The LED will illuminate in green when the product is connected to power supply, and red when the product is on standby.
3	Input / Output buttons	You need to press an output button (1~4) firstly and then press an input button (1~4) to select the corresponding input source for the output port.
4	MENU / ENTER / UP /DOWN	1EDID Check: On the initial OLED display screen, press "MENU" button to enter the Matrix switching state interface, then press "UP/DOWN" button to check the current EDID information of each HDMI input port.2EDID setting: On the initial OLED display screen, press "MENU" button to enter the EDID setting interface, press "UP/DOWN" button to select the required EDID and press the "ENTER" button. A prompt "copy to input:" will appear. Then press "UP/DOWN" button to select the input port you need to set, and press "ENTER" button again to confirm.3Baud rate setting: On the initial OLED display screen, press "MENU" button to enter the Baud rate interface, and press "UP/DOWN" button to select the required Baud rate, finally press the "ENTER" button to confirm the setting.4IP Address Check: On the initial OLED display screen, press "MENU" button to enter the IP interface, then press "UP/DOWN" button to check the current IP address. Pressing the "MENU" button again will return to the initial OLED display status.
5	POWER button	Long press the POWER button for 3 seconds to enter the standby mode, then short press it to wake up the device.
6	IR Window	IR receiver window, it only receives the IR remote signal

Rear Panel

1 2 3 4 5 6 7 9 10 11 2

No.	Name	Function Description
1	IR EXT	If the IR receiver window of the unit is blocked or the unit is installed in a closed area out of infrared line of sight, the IR receiver cable can be Inserted to the "IR EXT" port to receive the IR remote signal.
2	IR INPUT ports	Connect to IR receiver cable, the IR receive signal will emit to "IR OUT" port of the HDBaseT Receiver.
3	IR OUTPUT ports	Connect to IR blaster cable, the IR emit signal is from "IR IN" port of the HDBaseT Receiver.
4	AUDIO IN ports	L/R, optical and coaxial audio input ports, connect to external audio source device such as PC or DVD.
5	RS-232 port	Connect to a PC or control system by 3-pin phoenix connector serial cable to transmit command between the Matrix and HDBaseT Receiver.
	DIGITAL port	Coaxial audio output port, connect to audio output device such as audio amplifier via a coaxial cable.
	STEREO port	Stereo audio output port, connect to an amplifier or speaker via a 3.5mm audio cable.
6	GND	The housing is connected to the ground.
7	TCP/IP port	This port is the link port for TCP/IP control and connect to an active Ethernet link by an RJ45 cable.
8	RS-232 port	Connect to a PC or control system by D-Sub 9-pin cable to control the Matrix.
9	INPUT ports (1-4)	HDMI input ports, connect to HDMI source device such as DVD or PS4 with an HDMI cable.
10	OUTPUT ports (1-4)	HDBaseT ports, connect to HDBaseT Receiver via CAT cable. HDMI output ports, connect to HDMI display device such as TV or monitor with an HDMI cable.
11	LAN	This port is connected to a router and the LAN port of the HDBaseT Receiver can connect Internet device such as PC

Data Signal Indicator Lamp • Illuminating: HDMI signal with HDCP • Flashing: HDMI signal without HDCP • Dark: No HDMI signal. Video (OUT) Connection Signal Indicator Lamp • Illuminating: Matrix and HDBaseT Receiver are in goodconnection status. • Flashing: Matrix and HDBaseT Receiver are in poor connection status. • Dark: Matrix and HDBaseT Receiver are not connected.

5.2 HDBaseT Receiver Panel

1 2 3 4 5 6 7 8 9 10 LAN LAN DC 24V HDMI OUT HDMI OUT HDMI OUT HDMI OUT HDMI OUT HDMI OUT HDMI OUT HDMI OUT HDMI OUT HDMI OUT

No.	Name	Function Description
1	POWER LED	Power LED Indicator. LED will illuminate when the device is connected to a power supply.
2	SERVICER port	Firmware update port
3	DC 24V	Plug the DC 24V/1A power cord into this port and connect the adapter to AC wall outlet.Note:The Matrix supports POC function, so the Receiver doesn't need a power supply when HDBaseT IN port is connected to HDBaseT port of the Matrix.
4	HDBaseT IN port	Connect to HDBaseT output port of the Matrix with CAT cable.
5	Connection Signal Indicator	• Illuminating: Matrix and Receiver are in good connection status.• Flashing: Matrix and Receiver are in nonconnection status
7	IR IN	Connect to IR receiver cable, the IR signal will emit to IR OUT port of the Matrix.
8	IR OUT	Connect to IR blaster cable, the IR emit signal is from IR IN port of the Matrix.
9	HDMI OUT port	HDMI output port, connect to HDMI display device such as TV or monitor with HDMI cable.
10	RS-232 port	Connect to a PC or control system by 3-pin phoenix connector cable to transmit command between the Matrix and HDBaseT Receiver.
11	LAN ports	Connect Ethernet cables to these ports to provide a wired Ethernet connection to local devices.

6. IR Remote

1 2 3 4 5 HDMI Matrix Remote

① Power on or Standby: Power on the Matrix or set
it to standby mode.
② Output 1: Press 1:2:3:4 button to select input source to HDMI OUTPUT 1.
③ Output 2: Press 1\2\3\4 button to select input source to HDMI OUTPUT 2.
④ Output 3: Press 1\2\3\4 button to select input source to HDMI OUTPUT 3.
⑤ Output 4: Press 1\2\3\4 button to select input source to HDMI OUTPUT 4.
◀ ▶ : Select the last or next input source button.

The Matrix input and output sources can be selected by using the IR remote. There are two ways to receive the IR remote signal.

HOMI 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80

IR remote of the Matrix

The second method: If the IR receiver window of the Matrix is blocked or the Matrix is installed in a closed area out of infrared line of sight, the IR receiver cable can be inserted to the "IR EXT" port to receive the IR remote signal. The furthest distance of using the IR remote is 7 meters

and the IR remote is directly faced to the IR receiver head. The diagram is shown as below.

IR remote of the Matrix Machine Cabinet

7. IR Control System

The product is not only a matrix switch but also an extender. It supports bi-directional IR control. When the matrix is connected to a HDBaseT Receiver through Cat 5e/6/7 cable, you can control the remote display device (HDBaseT) or Input source device (Matrix) through IR signal transmission. The IR signal transmission method is different using the method from Matrix (local) to HDBaseT Receiver (remote) and from HDBaseT Receiver (remote) to Matrix (local).

At the Matrix end (Local end): the IR signal is one-to-one transmission. It means that the IR INPUT 1 port signal of the Matrix will emit to IR output port of the HDBaseT Receiver 1 and the IR INPUT 2 port signal of the Matrix will emit to IR output port of the HDBaseT Receiver 2 etc. It doesn't follow the video switch to change. IR All input port signal of the Matrix will emit to all IR output port of HDBaseT receiver simultaneously. Please see the following connection diagram.

TV 1 remote TV 2 remote Matrix CAT Seo/7 cable CAT Seo/87 cable Receiver 3 IR Blaster TV 3 Receiver 1 IR Blaser TV 1

At HDBaseT receiver (Remote end): IR signal follows video switch to change. For example, the HDMI output signal on the HDBaseT Receiver 1 is from the HDMI 2 input port, so IR input signal of the HDBaseT Receiver 1 will emit to IR OUTPUT 2 port of the Matrix. The HDMI output signal on the HDBaseT Receiver 3 is from the HDMI 4 input port. Then, IR input signal of the HDBaseT Receiver 3 will emit to IR OUTPUT 4 port of the Matrix etc. Any of HDBaseT Receiver's IR IN signal can output from IR ALL port of the Matrix and the IR OUTPUT ALL signal of the Matrix depends on your IR remote of source device. Please see the following connection diagram.

DVD Blu-ray player TV 3 Receiver 3 Blu-ray player remote Receiver 1 TV 1 DVD remote

Figure 2: IR connection diagram (HDBaseT Receiver end)

8. IR Cable Pin Assignment

Two black cables with connectors, one labeled 'IR RECEIVER IR BLASTER' (no other text or symbols visible)

IR Blaster IR Nodg 1 IR Blaster Signal 2 Power 3 NC 1 IR Signal 2 Power 3 Grounding

9. EDID Management

This Matrix has 21 factory defined EDID settings, 2user-defined EDID modes and 8 copy EDID modes. You can select defined EDID mode or copy EDID mode to input port through on-panel button, ASCII control or Web GUI.

On-panel button operation: On the initial OLED display screen, press "MENU" button to enter the EDID setting interface, press "UP/DOWN" button to select the required EDID, and press the "ENTER" button. A prompt "copy to input" will appear. Then press "UP/DOWN" button to select the input port you need to set, and press "ENTER" button again to confirm this operation.

RS-232 control operation: Connect the Matrix to PC with a serial cable, then open a Serial Command tool on PC to send ASCII command "s edid in x from z!" to set EDID. For details, please refer to "EDID Sellino" in the ASCII command list of '12. RS-232 Control Command".

HDMI Bus Video Audio/Real Audio/Real Signal Setting Name Address Type E2D USB1 USB2 USB3 USB4 USB5 USB6 USB7 USB8 USB9 USB10 USB11 USB12 USB13 USB14 USB15 USB16 USB17 USB18 USB19 USB20 USB21 USB22 USB23 USB24 USB25 USB26 USB27 USB28 USB29 USB30 USB31 USB32 USB33 USB34 USB35 USB36 USB37 USB38 USB39 USB40 USB41 USB42 USB43 USB44 USB45 USB46 USB47 USB48 USB49 USB50 USB51 USB52 USB53 USB54 USB55 USB56 USB57 USB58 USB59 USB60 USB61 USB62 USB63 USB64 USB65 USB66 USB67 USB68 USB69 USB70 USB71 USB72 USB73 USB74 USB75 USB76 USB77 USB78 USB79 USB80 USB81 USB82 USB83 USB84 USB85 USB86 USB87 USB88 USB89 USB90 USB91 USB92 USB93 USB94 USB95 USB96 USB97 USB98 USB99 USB100

The defined EDID setting list of the product is shown as below:

EDID Mode	EDID Description
1	1080p, Stereo Audio 2.0
2	1080p, Dolby/DTS 5.1
3	1080p, HD Audio 7.1
4	1080i, Stereo Audio 2.0
5	1080i, Dolby/DTS 5.1
6	1080i, HD Audio 7.1
7	3D, Stereo Audio 2.0
8	3D, Dolby/DTS 5.1
9	3D, HD Audio 7.1
10	4K2K30_444, Stereo Audio 2.0
11	4K2K30_444, Dolby/DTS 5.1
12	4K2K30_444, HD Audio 7.1
13	4K2K60_420, Stereo Audio 2.0
14	4K2K60_420, Dolby/DTS 5.1
15	4K2K60_420, HD Audio 7.1
16	4K2K60_444, Stereo Audio 2.0
17	4K2K60_444, Dolby/DTS 5.1
18	4K2K60_444, HD Audio 7.1
19	4K2K60, Stereo Audio 2.0 HDR
20	4K2K60, Dolby/DTS 5.1 HDR
21	4K2K60, HD Audio 7.1HDR

10. Matrix Audio and RS-232 Introduction

The Matrix supports coaxial and analog audio output. The audio signal follows HDBaseT and HDMI output port. It supports one-to-one transmission. For example, the OUTPUT 1 port audio signal follows HDBaseT and HDMI 1 port, the OUTPUT 2 port audio signal follows HDBaseT and HDMI 2 port etc.

If HDMI ARC switch and HDBaseT ARC switch are turned on by ASCII command, the coaxial and analog audio output can be the returned HDMI or HDBaseT display device's audio, the external audio source, or the extracted HDMI source device audio. Note: During multi-audio, 3.5 audio has no audio output.

The RS-232 channel is also one to one transmission. For example, the RS-232 port of the OUTPUT 1 at Matrix end follows the RS-232 port at HDBaseT Receiver 1, The RS-232 port of the OUTPUT 3 at Matrix end follows the RS-232 port at HDBaseT Receiver 3 etc. Please see the following connection diagram.

Matrix Laptop DVD HDMI Matrix 3 Speaker 3 Kadshena 3 Receiver 1 HDMI Matrix 1 PC 1 2.6 Speakers 1 Amper For 1 Receiver 3 PC 3 RS-232 port: • The RS-232 port of Matrix and receiver is a hand-way

TX RX 3-pin Phoenix Connector RS-232 PC RS-232 to USB cable PIN5: GND PIN3: RXD PIN2: TXD PIN5: CND PIN3: TXD PIN2: RXD RS-232 DB9, Female RS-232 DB9, Male

Figure 4: 3-pin phoenix connector to USB

11. Web GUI User Guide

The Matrix can be controlled by Web GUI. The operation method is shown as below:

Step 1: Get the current IP Address.

The default IP address is 192.168.1.100. You can get the current Matrix IP address in two ways:

The first way: You can get the IP address via panel buttons. On the initial OLED display, press

"MENU" button to enter the Matrix switching state interface, then press "UP/DOWN" button to check the current IP address.

The second way: You can get the IP address via RS-232 control. Send the ASCII command

" r ipconfig!" through a Serial Command tool, then you'll get the feedback information as shown below:

IP Mode: DHCP

IP:192.168.62.109

Subnet Mask:255.255.255.0

Gateway:192.168.62.1

TCP/IP port:8000

Step 2: Connect the TCP/IP port of the Matrix to a PC with an UTP cable, and set the IP address of the PC to be in the same network segment with the Matrix.

Step 3: Input the IP address into your browser on the PC to enter Web GUI page.

After entering the Web GUI page, there will be a Login page, as shown below:

HOMI 1.234587000 Password: 1234587000 © Scan-up © 2014 & Printed Files

Select the Username from the list and enter the password. The default passwords are:

Username User Admin

After entering the password, click the "LOGIN" button and the following Status page will appear.

■ Status Page

The Status page provides basic information about the installed firmware version and the network settings of the device.

HDMI Home Name: Mood ITEMS Video Audio Content Video Internet IP Address Internet Mask Copyright ITEMS HOME

■ Video Page

HDMI Name: Input Select Select Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Select to: Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next Next

You can do the following operations on the Video page:

① Output: The current device's OUTPUT port. You can select signal source for it.
② Input: You can click the drop-down menu to select signal source for the corresponding OUTPUT port.
③ Presets Name: You can name the current scene with maximum length of 12 characters (Chinese name is unsupported).
④ Presets Set: You can restore the settings of the last saved audio-video matrix switching relationship.
⑤ Presets Save: You can save audio-video matrix switching relationship.
⑥ Presets Clear: You can clear the saved audio-video matrix switching relationship.

■ Audio-HDMI Page

AMD Home File Edit View Help AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD AutoCAD

You can do the following operations on the Audio HDMI app:

■ Audio-Extract Page

HOME Audio Settings Audio Type Audio Name Audio Rating Audio Color Audio Color Audio Name Audio Name Audio Color Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name Audio Name

You can do the following operations on the Audio-Extract page:

① Channel: Audio output channel for coaxial audio or analog audio.
② Audio Source: The input source of the current audio channel. You can switch the input source by clicking the corresponding drop-down box to select the desired input source.
③ Audio Delay: Set the output delay. You can modify It by entering the corresponding value (range: 0 \~ 300) in the input box.
④ Mute: You can mute or unmute the audio output channel by clicking the blue button.
⑤ Audio Volume(Analog): You can set the volume value (range: 0\~30) for the analog output channel by clicking "-" / "+" or entering the value in the input box.

■ Input Page

HDMI Status Windows Auto HDM Auto HDM Local DOS DOS DOS DOS Local DOS to our company DOS (DOS) No. 1 DOS (DOS) No. 2 DOS (DOS) No. 3 DOS (DOS) No. 4 DOS (DOS) No. 5 DOS (DOS) No. 6 DOS (DOS) No. 7 DOS (DOS) No. 8 DOS (DOS) No. 9 DOS (DOS) No. 10 DOS (DOS) No. 11 DOS (DOS) No. 12 DOS (DOS) No. 13 DOS (DOS) No. 14 DOS (DOS) No. 15 DOS (DOS) No. 16 DOS (DOS) No. 17 DOS (DOS) No. 18 DOS (DOS) No. 19 DOS (DOS) No. 20 DOS (DOS) No. 21 DOS (DOS) No. 22 DOS (DOS) No. 23 DOS (DOS) No. 24 DOS (DOS) No. 25 DOS (DOS) No. 26 DOS (DOS) No. 27 DOS (DOS) No. 28 DOS (DOS) No. 29 DOS (DOS) No. 30 DOS (DOS) No. 31 DOS (DOS) No. 32 DOS (DOS) No. 33 DOS (DOS) No. 34 DOS (DOS) No. 35 DOS (DOS) No. 36 DOS (DOS) No. 37 DOS (DOS) No. 38 DOS (DOS) No. 39 DOS (DOS) No. 40 DOS (DOS) No. 41 DOS (DOS) No. 42 DOS (DOS) No. 43 DOS (DOS) No. 44 DOS (DOS) No. 45 DOS (DOS) No. 46 DOS (DOS) No. 47 DOS (DOS) No. 48 DOS (DOS) No. 49 DOS (DOS) No. 50 DOS (DOS) No. 51 DOS (DOS) No. 52 DOS (DOS) No. 53 DOS (DOS) No. 54 DOS (DOS) No. 55 DOS (DOS) No. 56 DOS (DOS) No. 57 DOS (DOS) No. 58 DOS (DOS) No. 59 DOS (DOS) No. 60 DOS (DOS) No. 61 DOS (DOS) No. 62 DOS (DOS) No. 63 DOS (DOS) No. 64 DOS (DOS) No. 65 DOS (DOS) No. 66 DOS (DOS) No. 67 DOS (DOS) No. 68 DOS (DOS) No. 69 DOS (DOS) No. 70 DOS (DOS) No. 71 DOS (DOS) No. 72 DOS (DOS) No. 73 DOS (DOS) No. 74 DOS (DOS) No. 75 DOS (DOS) No. 76 DOS (DOS) No. 77 DOS (DOS) No. 78 DOS (DOS) No. 79 DOS (DOS) No. 80 Data/Description: Data/Description: Data/Description: Data/Description: Data/Description: Data/Description: Data/Description: Data/Description: Data/Description: Data/Description: Data/Description: Data/Description: Data/Description: Data/Description: Data/Description: Data/Description: Data/Description: Data/Description: Data/Description: Data/Description: Data/Description:

You can do the following operations on the Input page:

Set EDID for the User

Click the "Browse" button, then select the bin file. If you select the wrong EDID file, there will be a prompt, as shown in the following figure:

Make sure to select the correct file, then you can check the name of the selected file. Select "User 1" or "User 2", then click "Upload". After successful setting, it will prompt as follows:

Download the EDID File for the Corresponding Input Channel

Click the drop-down box of "Select EDID File" to select the corresponding input channel. Then click "Download" to download the corresponding EDID file.

■ Output Page

HDMI Output Setting Gates Name Date Date Final Settings LPT Video Video1 Video1 0289 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1277777777777777777777777777777777777777777777777777777777777777777777777777777777777777

You can do the following operations on the Output page: ① Outputs: Output channel of the device.

⑤ Scalar Mode: Set the current output resolution mode.
⑤ ARC: Turn on/off the ARC function.
⑦ Stream: Turn on/off the output stream.

■ CEC Page

HDMI Input Controls Output Controls

You can perform CEC management on this page:

① Input Control: You can control the operation of each input source by pressing the icons
on the page.
② Output Control: You can control the operation of each display, such as power on/off,
volume +/-, active source switching.

■ Network Page

HOMI ID: https://www.homi.com/ Home Internet 400-162.13 Email: 162.13.13 Password: 00108153 Auto Cyprus Web login: Name: Login Account: Login Address: Login Phone: Login Policy: Login Privacy: Login Security: Login Privacy Security: Login Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security: Login Privacy Privacy Privacy Security Login Privacy Privacy Privacy Security Login Privacy Privacy Privacy Security Login Privacy Privacy Privacy Security Login Privacy Privacy Privacy Security Login Privacy Privacy Privacy Security Login Privacy Privacy Privacy Security Login Privacy Privacy Privacy Security Login Privacy Privacy Privacy Security Login Privacy Privacy Privacy Security Login Privacy Privacy Privacy Security Login Privacy Privacy Privacy Security Login Privacy Privacy Privacy Security Login Privacy Privacy Privacy Security Login Privacy Privacy Privacy Security Login Privacy Privacy Privacy Security Login Privacy Privacy Privacy Security Login Privacy Privacy Pricing Login Private Pricing Login Public Pricing Login Private Pricing Login Public Pricing Login Private Pricing Login Public Pricing Login Private Pricing Login Public Pricing Login Private Pricing Login Public Pricing Login Public Pricing Login Private Pricing Login Public Pricing Login Public Pricing Login Private Pricing Login Public Pricing Login Public Pricing Login Private Pricing Login Public Pricing Login Public Pricing Login Private Pricing Login Public Pricing Login Public Pricing Login Private Pricing Login Public Pricing Login Public Pricing Login Private Pricing Login Public Pricing Login Public Pricing Login Private Pricing Login Public Pricing Login Public Pricing Login Private Pricing Login Public Pricing Login Private Pricing Login Public Pricing Login Public Pricing Login Private Pricing Login Public Pricing Login Public Pricing Login Private Pricing Login Public Pricing Login Public Pricing Login Private Pricing Login Public Pricing Login Public Pricing Login Private Pricing Login Public Pricing Login Public Pricing Login Private Pricing Login Public Pricing Login Public Pricing Login Private Pricing Login Public Pricing Login Public Pricing Login private pricing Login public pricing Login private pricing Login public pricing Login private pricing Login public pricing Login public pricing Login private pricing Login public pricing Login public pricing Login private pricing Login public pricing Login public pricing Login private pricing Login public pricing Login public pricing Login private pricing Login public pricing Login public pricing Login private pricing Login public pricing Login public pricing Login private pricing Login public pricing Login public pricing Login private pricing Login public pricing Login public pricing Login private pricing Login public pricing Login private pricing Login private pricing Login private pricing Login private pricing Login private pricing Login private pricing Login private pricing Login private pricing Login private pricing Login private pricing Login private pricing Login private pricing Login private pricing Login private pricing Login private pricing Login private pricing Login private pricing Login private pricing Login private pricing Login private pricing Login private pricing Login private pricing Login private pricing Login private pricing Login private pricing Login public pricing Login public pricing login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: login price: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning: sessioning:

Set the Default Network

Click "Set Network Defaults" button, there will be a prompt, as shown in the following figure:

Click "OK" to search the IP Address again, as shown in the following figure:

HCMN Name Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Symbol Total Assets & Other Assets

After searching is completed, it will switch to the login page, the default network setting is completed.

Modify User Password

Click the "User" button, enter the correct Old Password, New Password, and Confirm Password, then click "Save". After successful modification, there will be a prompt, as shown in the following figure:

Modify Network Setting

Modify the Mode/IP Address/Gateway/Subnet Mask/Telnet Port as required, click "Save" to save the settings, then it will come into effect.

After modification, if the Mode is "Static", it will switch to the corresponding IP Address; if the Mode is "DHCP", it will automatically search and switch to the IP Address assigned by the router.

DP Settings Name: IP Address: 962.105.2.143 System name: 962.105.2.143 Saved format: 301.316.258.8 Saved format: 25

■ System Page

HDMI Volume Video Radio-ROM Audio Embedt WIFI Reset CNC Networks Systems Signal Lock Sleep LCD Serial Audio Rate Passengers Outputs Factory Record Router Finish

① Panel Lock: Click "Panel Lock" to lock/unlock panel buttons. "On" indicates that panel buttons are unavailable; "Off" indicates panel buttons are available.
② Beep: Click "Beep" to turn on/off the beep.
③ LCD: You can turn on/off the LCD, and set the turn-on time (15s/30s/60s).
④ Serial Baud Rate: Click the value to set the Serial Baud Rate.
⑤ Firmware Update: Click "Browse" to select the update file, then click "Update" to complete firmware update.
⑥ Factory Reset: You can reset the machine to factory defaults by clicking "Reset".
⑤. Rabeet: You can shoot the machine by clicking "Doboot"

12. RS-232 Control Command

The product also supports RS-232 control. You need a serial cable with RS-232 male head and DB9 transfer USB male head. The RS-232 head of the serial cable is connected to the RS-232 control port with DB 9 at the rear of the Matrix, and the USB head of the serial cable is connected to a PC. The connection method is as follows:

RS-232 RS-232 10 USB

Then, open a Serial Command tool on PC to send ASCII command to control the Matrix.

The ASCII command list about the product is shown as below.

ASCII Command
Serial port protocol: Baud rate: 115200, Data bits: 8bit, Stop bits:1, Check bit: 0
x - Parameter 1y - Parameter 21 - Delimiter
ASCII Command	Function Description	Example	Feedback	Default Setting
Power
s power z!	Power on/off the device, z=0-1 (z=0 power off, z=1 power on)	s power 1!	Power onSystem Initializing... Initialization Finished! power offPOWER 0	power on
r power!	Get current power state	r power!	power onpower off
s reboot!	Roboot the device	s reboot!	Reboot...System Initializing... Initialization Finished!FW version 1.00.01
System Setup
help!	List all commands	help!
r type!	Get device model	r type!	HDM-B44H100P
			Get the unit all status: power been look on?
ASCII Command	Function Description	Example	Feedback	Default Setting
r fw version!	Get Firmware version	r fw version!	MCU ROOT: V1 00.02MCU APP: V1.00.01WBS QUT: V1.01
r link in x!	Get the connection status of the x input port, x-0~4(0-all)	r link in 1!	hdmi input 1: connect
r link out y!	Get the connection status of the y output port, y-5~40-all!	r link out 1!	hdmi output 1: connecthdmi output 1: connect
a rosot!	Reset to factory defaults	a rosot!	Reset to factory defaultsSystem Initializing...Initialization Finished!FW version 1.00.01
a beep z!	Enable/Disable buzzer function,z-0~1(z-0 beep off, z-1 beep on)	a beep 1!	beep onbeep off	beep on
r bocp!	Get buzzer state	r bocp!	boop on z boop off
s lock z!	Look/Unlock front panel button,z-0-1 (z-0 lock off, z-1 lock on)	s lock 1!	panel button lock onpanel button lock off	panel buttonlock off
r lock!	Got panel button lock state	r lock!	panel button lock on/off
a lod on time z!	Sot LCD screen remain on time,z-0~4 (0.0ft, 1 always on, 2:15s,3:30s, 4:60s)	s lod on time 1!	Icd on always	Icd on 30 seconds
r lod mode!	Get the backlight status of lod screen	r lod model	Icd on always
a save preset z!	Save switch state between all output port and the input port to preset z, z-1~4	a save preset 1!	save to preset 1
a recall preset z!	Call saved preset z scenarios,z-1~4	a recall preset 1!	recall from preset 1
a clear preset z!	Clear stored preset z scenarios,z-1~4	a clear preset 1!	clear preset 1
r prosot z!	Get preset z information, z-1~4	r prosot 1!	video/audio crosspoint
s pip!		s pip!	pip	pip
Output Setting
a in x av out y!	Set input x to output y,x-1~4, y-0~4(0-all)	a in I av out 2!	input 1 -> output 2	input 1 -> output 1input 2 -> output 2input 3 -> output 3input 4 -> output 4
r av out y!	Get output y signal statusy-0~4(0-all)	r av out 0!	input 1 -> output 1input 2 -> output 2input 3 -> output 3input 4 -> output 4
s hdmi y stream z!	Set hdmi output y stream on/off,y-0~4(0-all)z-0~1(0 disable,1 enable)	s hdmi 1 stream 1!s hdmi 0 stream 1!	Enable hdmi output 1streamDisable hdmi output 1streamEnable hdmi all outputstreamDisable hdmi all outputstream	Enable hdmi all outputs stream
s hdbt y stream z1	Set hdbt output y stream onvolf, y-0~4(0-all)z-0~1(0; disable, 1 enable)	s hdbt 1 stream 1s hdbt 0 stream 1	Enable hdt output 1 streamDisable hdt output 1 streamEnable hdt all outputs streamDisable hdt all outputs stream	Enable hdt all outputs stream
r hdbt y stream!	Get hdbt output y stream status, y-0~4(0-all)	r hcbt 1 stream!	Enable hdt output 1 streamDisable hdbt output 1 stream
s hdmi y scaler z1	Set hdmi output y port output scaler mode, y-0~4(0-all), z-1~3(1-bypass,2~4k->1080p, 3=Auto)	s hdmi 1 scaler 11s hdmi 0 scaler 11	hdmi output 1 set to bypass modehdmi all outputs set to bypass mode	hdmi all outputs set to bypass
r hdmi y scaler!	Get hdmi output y port output mode y-0~4(0-all)	r hdmi 1 scaler!	hdmi output 1 set to bypass mode
s hdbt y scaler z1	Set hdbt output x port output scaler mode, y-0~4(0-all), z-1~3(1-bypass,2~4k->1080p, 3=Auto)	s hdbt 1 scaler 21s hdbt 0 scaler 21	hdt output 1 set to 4k->1080p modehdt all outputs set to 4k->1080p mode	hdt all outputs set to bypass
r hdt y scaler 1	Get hdbt output y port output scaler mode y-0~4(0-all)	r hcbt 1 scaler !	hdbt output 1 set to 4k->1080p mode
EDID Setting
s solid in x from z1r eddi data hdi y!	Set input x EDID from default EDID 2,x-0~4(0-all),z-1~311=1090p,Stereo Audio 2.02~1060p,Dolby/OTS 5.13~1060p,HD Audio 7.14~1080,Stereo Audio 2.05~1060,Dolby/OTS 5.16~1050,HD Audio 7.17~3D,Stereo Audio 2.08~3D,Dolby/OTS 5.19~3D HD Audio 7.110~4K2K30_444,Stereo Audio 2.011~4K2K30_444,Dolby/OTS 5.113~4K2K60_444,Stereo Audio 2.014~4K2K60_420,Dolby/OTS 5.115~4K2K60_420,HD Audio 7.116~4K2K60_444,Stereo Audio 2.017~4K2K60_444,Dolby/OTS 5.118~4K2K60_444,HD Audio 7.119~4K2K60_444,Stereo Audio 2.0 -HOR20~4K2K60_444,Dolby/CTS 5.1HOR21~4K2K60_444,HD Audio 7.1HOR22=User22=User224~27-copy from hdmi output 1~428~51-copy from hdbt output 1~4Get the EDiD data of the hdmi output y port. y=1~4	s solid in 1 from 1r eddi data hdi 1!	IN 1 EDID:1060p,Stereo Audio 2.0EDiD: 00 FF FF FF FF FF 00 ......	IN1: 1080p,Stereo Audio 2.0IN2: 1080p,Stereo Audio 2.0IN3: 1080p,Stereo Audio 2.0IN4: 1080p,Stereo Audio 2.0
r eddi data hdt y!	Get the EDiD data of the hdtl output y port. y=1~4	r eddi data hdt 1!	EDiD: 00 FF FF FF FF FF 00 ......
r internal eddi!	Get all built-in EDiD information for unit support	r internal eddi!	1,1080p, Stereo Audio 2.02,1080p, Dolby/DT3 5.13,1080p, HD Audio 7.14,1080p, Stereo Audio 2.0......20,4K2K60,Dolby/ DTS 5.1 HDR21,4K2K60,HD Audio 7.1 HDR
Audio Setting
s hdmi y arc z!	Turn on/off ARC of HDMI output y y=0~4(0-all)z=0~1 (z=0,off,z=1 on)	s hdmi 1 arc 1!s hdmi 0 arc 1!	hdmi output 1 arc onhdmi output 1 arc offhdmi all outputs arc onhdmi all outputs arc off	hdmi all outputs arc off
r hdmi y arc!	Get the ARC state of HDMI output y. y=0~4(0-all)	r hdmi 1 arc!	hdmi output 1 arc on
s hdt y arc z!	Turn on/off ARC of HDBT output y y=0~4(0-all)z=0~1 (z=0,off,z=1 on)	s hdt 1 arc 1!s hdt 0 arc 1!	hdt output 1 arc onhdt output 1 arc offhdt all outputs arc onhdt all outputs arc off	hdt all outputs arc off
r hdt y arc!	Get the ARC state of HDMI output y. y=0~4(0-all)	r hdt 1 arc!	hdt output 1 arc on
s out y audio from	Set HDMI/HDBT output audio y=0~4(0-all),z=0~16z=0, Defaultz=1~4 from HDMI input 1~4z=5~6 from HDMI out 1~4 ARCz=9~12 from HDBT out 1~4 ARCz=13~16 from embed audio 1~4Attention: when z=0,HDMI/HDBT audio can't set audio delay.	s out 1 audio froms out 0 audio from 1	HDMI/HDBT output 1audio: from HDMI input 1HDMI/HDBT all outputaudio: from HDMI input 1	HDMI/HDBT all outputs from default
r out y audio!	Got HDMI/HDBT output audio status y=0~4(0-all)	r out 1 audio!	HDMI/HDBT output 1from HDMI input 1
s coax_analog out y audio from z!	Set coaxial output audio y=0~4 (0-all),z=1~1z=1~4 from HDMI input 1~4z=5~8 from HDMI out 1~4 ARCz=9~12 from HDBT out 1~4 ARCz=13~16 from embed audio 1~4	s coax_ analog out 1 audio from 1!a coax_ analog out 0 audio from 1!	Coaxial_Analog output 1 audio: from HDMI input 1Coaxial Analog all outputs audio: from HDMI input 1	Coaxial_Analog all outputs audio: from HDMI input 1
s coax_analog out y audio from	Sot coax_analog output audio y=0~4(0-all),z=0~1	s coax_analog out 1 audio delay 100°	Coaxial Analog output audio delay 100ms	Coaxial_Analog all outputs audio
s coax_analog out y audio vol ≥1	Set analog output audio volume y=0-4(0-all), z=0-30,+,-	s analog out 1 audio vol 30! s analog out 1 audio vol +! s analog out 0 audio vol 30! s analog out 0 audio vol +!	Analog output 1 audio volume 30 Analog all outputs audio volume 30	all Analog output audio volume 20
r coax analog out y audio!	Get coax analog output audio status y=0-4(0-s!)	r coax analog out 1 audio!	Coaxial_Analog output 1 audio from HDMI input 1 Coaxial_Analog output 1 audio delay Ons Analog output 1 audio volume 20 Muto off coax_analog output 1 audio
CEC Setting
s cec in x on!	set input x power on by CEC, x=0-4(0-all input)	s cec in 1 on!	input 1 power on
s cec in x pfl!	set input x power off by CEC, x=0-4(0-all input)	s cec in 1 off!	input 1 power off
s ccc in x menu!	set input x open menu by CEC, x=0-4(0-all input)	s ccc in 1 menu!	input 1 open menu
s cec in x back!	set input x back operation by CEC, x=0-4(0-all input)	s cec in 1 back!	input 1 back operation
s cec in x up!	set input x menu up operation by CEC, x=0-4(0-all input)	s cec in 1 up!	input 1 menu up operation
s ccc in x down!	set input x menu down operation by CEC, x=0-4(0-all input)	s ccc in 1 down!	input 1 menu down operation
s cec in x left!	set input x menu left operation by CEC, x=0-4(0-all input)	s cec in 1 left!	input 1 menu left operation
s cec in x right!	set input x menu right operation by CEC, x=0-4(0-all input)	s cec in 1 right!	input 1 menu right operation
s cec in x enter!	set input x menu enter by CEC, x=0-4(0-all input)	s cec in 1 enter!	input 1 menu enter operation
s ccc in x play!	set input x play by CEC, x=0-4(0-all input)	s ccc in 1 play!	input 1 play operation
s cec in x pause!	set input x pause by CEC, x=0-4(0-all input)	s cec in 1 pause!	input 1 pause operation
s ccc in x stop!	set input x stop by CEC, x=0-4(0-all input)	s ccc in 1 stop!	input 1 stop operation
s cec in x new!	set input x rewind by CEC, x=0-4(0-all input)	s cec in 1 new!	input 1 rewind operation
s ccc in x mutc!	set input x volume mutc by CEC, x=0-4(0-all input)	s ccc in 1 mutc!	input 1 volume mutc
s ccc in x vol!	set input x volume down by CEC, x=0-4(0-all input)	s ccc in 1 vol!	input 1 volume down
s cec in x next!	set input x next by CEC, x-0-4(0-all input)	s cec in 1 next!	Input 1 next operation
s cec hdmi out y on!	set hdmi output y power on by CEC, y-0-4(0-all hdmi output)	s cec hdmi out 1 on!	hdmi output 1 power on
s cec hdi cut y on!	set hdi output y power on by CEC, y-0-4(0-all hdi output)	s cec hdi cut 1 on!	hdi output 1 power on
s cec hdmi out y off!	set hdmi output y power off by CEC, y-0-4(0-all hdmi output)	s cec hdmi out 1 off!	hdmi output 1 power off
s cec hdi cut y off!	set hdi output y power off by CEC, y-0-4(0-all hdi output)	s cec hdi cut 1 off!	hdi output 1 power off
s cec hdmi out y mute!	set hdmi output y volume mute by CEC, y-0-4(0-all hdmi output)	s cec hdmi cut 1 mute!	hdmi output 1 volume mute
s ooc hdi out y mute!	set hdi output y volume mute by CEC, y-0-4(0-all hdi output)	s cec hdi cut 1 mute!	hdi output 1 volume mute
s ooc hdmi out y vol-!	set hdmi output y volume down by CEC, y-0-4(0-all hdmi output)	s cec hdmi cut 1 vol-!	hdmi output 1 volume down
s ooc hdi out y vol-!	set hdi output y volume down by CEC, y-0-4(0-all hdi output)	s cec hdi cut 1 vol-!	hdi output 1 volume down
s ooc hdmi out y vol+!	set hdmi output y volume up by CEC, y-0-4(0-all hdmi output)	s cec hdmi cut 1 vol-?	hdmi output 1 volume up
s cec hdi out y vol+!	set hdi output y volume up by CEC, y-0-4(0-all hdi output)	s cec hdi cut 1 vol-!	hdi output 1 volume up
s ooc hdmi out y active!	set hdmi output y active source by CEC, y-0-4(0-all hdmi output)	s ooc hdmi cut 1 active!	hdmi output 1 active source
s cec hdi out y active!	set hdi output y active source by CEC, y-0-4(0-all hdi output)	s cec hdi cut 1 active!	hdi output 1 active source
Network Setting
r ipconfig!	Got the Current IP Configuration	r ipconfig!	IP Mode: DHCP IP:192.168.62.106 Submel Mask: 255.255.255.0 Gateway:192.168.62.1 TCP/IP port:8000 Telnet port:23 Mac address: 6C:DF:FB:0C:B3:8E
r mac add!	Got network MAC address	r mac add!	Mac address: 6C:DF:FB:0C:B3:8E
a ip mode z!	Set network IP mode to static IP or DHCP, z-0-1 (z-0 Static, z-1 DHCP)	s ip mode 0!	Set IP mode:Static (Please use 's net reboot' command or repower device to apply new config!)	DHCP ON
r ip mode!	Get network IP mode	r ip mode!	IP Mode: DHCP
a ip addr xxx.xxx.xxx.xxx!	Set network IP address	s ip add 192.168.1.100!	Set IP address: 192.168.1.100 (Please use 's net reboot' command or repower device to apply now
a subnetxxx.xxx.xxx.xxx!	Set network subnet mask	s subnet255.255.255.0!	Set subnet Maskaddress:255.255.255.0IPlease use "s not reboot" command or repower device to apply new config!DHCP on, Device can't config subnet mask, set DHCP off first.
r subnet!	Get network subnet mask	r subnet!	Subnet Mask:255.255.255.0
s gatewayxxx.xxx.xxx.xxx!	Set network gateway	s gateway192.168.1.1!	Set gateway:192.168.1.1Please use "s net reboot" command or repower device to apply new config!DHCP on, Device can't config gateway, set DHCP off first.
r gateway!	Get network gateway	r gateway!	Gateway:192.168.1.1
a top/ip port x!	Set network TCP/IP port(x=1-65535)	s top/ip port 8000	Set TCP/IP port 8000	Set top/ip port:8000
r top/ip port!	Get network TCP/IP port	r top/ip port!	TCP/IP port:8000
a telnet port x!	Set network telnet port(x=1-65535)	s telnet port 23!	Set Telnet port:23	Set telnet port:23
r telnet port!	Got network telnet port	r telnet port!	Telnet port:23
s not reboot!	Reboot network modules	s not reboot!	Search for IP, Please wait ...!IP Mode, DHCPIP:192.168.62.111Subnet Mask:255.255.255.0Gateway:192.168.62.1TCP/IP port:8000Telnet port:23Mac address:8C.DF/FB.0C.63.8E
s uart x mode y!	Set the mode of x local and hdbt uart,x=0-4,y=0-1,0-bypass mode,1-user control mode	s uart 1 mode 1!	Local And Far Uart1Control Mode
s uart x datalen y!	Set the data length of x local and hdbt uart,x=0-8,y=1-2,1.8bit 2.7bit	s uart 1 datalen 1!	LocalUart1 DataLen is 8bit
s uart x baudrate y!	Set the baudrate of x local and hdbt uart,x=0-8(D=all,1-4-local uart,5=8=hdbt uart),y=1-81:115200(Default) 2:575003:66000 4:38400 5:192006:14400 7:9600 8:4800	s uart 1baudrate 1!	LocalUart%dBaudrate is 115200
s uart x parity y!	Set the Parity of x local and hdbt uart,x=0-8,y=1-3,	s uart x parity 1!	LocalUart1 Parity is 8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8.8

1. Application Example
   

graph TD
    A["Power Supply"] --> B["120 Operating"]
    B --> C["Amplifier"]
    C --> D["120 Micro with R3-32 function"]
    D --> E["PCI"]
    D --> F["EMD"]
    D --> G["BVD"]
    D --> H["TV"]
    D --> I["Radio"]
    D --> J["PC"]
    D --> K["PC"]
    D --> L["PC"]
    D --> M["PC"]
    D --> N["PC"]
    D --> O["PC"]
    D --> P["PC"]
    D --> Q["PC"]
    D --> R["PC"]
    D --> S["PC"]
    D --> T["PC"]
    D --> U["PC"]
    D --> V["PC"]
    D --> W["PC"]
    D --> X["PC"]
    D --> Y["PC"]
    D --> Z["PC"]
    D --> AA["PC"]
    D --> AB["PC"]
    D --> AC["PC"]
    D --> AD["PC"]
    D --> AE["PC"]
    D --> AF["PC"]
    D --> AG["PC"]
    D --> AH["PC"]
    D --> AI["PC"]
    D --> AJ["PC"]
    D --> AK["PC"]
    D --> AL["PC"]
    D --> AM["PC"]
    D --> AN["PC"]
    D --> AO["PC"]
    D --> AP["PC"]
    D --> AQ["PC"]
    D --> AR["PC"]
    D --> AS["PC"]
    D --> AT["PC"]
    D --> AU["PC"]
    D --> AV["PC"]
    D --> AW["PC"]
    D --> AX["PC"]
    D --> AY["PC"]
    D --> AZ["PC"]

14. Warranty

BZBGEAR wants to assure you peace of mind. We're so confident in the quality of our products that along with the manufacturer's one-year limited warranty, we are offering free second-year warranty coverage upon registration*.

Taking advantage of this program is simple, just follow the steps below:

1. Register your product within 90 days of purchase by visiting BZBGEAR.com/warranty.
2. Complete the registration form. Provide all necessary proof of purchase details, including serial number and a copy of your sales receipt.

For questions, please call 1.888.499.9906 or email [e-mail].

For complete warranty information, please visit BZBGEAR.com/warranty or scan the QR code below.

*Terms and conditions apply. Registration is required.

15. Mission Statement

BZBGEAR manifests from the competitive nature of the audiovisual industry to innovate while keeping the customer in mind. AV solutions can cost a pretty penny, and new technology only adds to it. We believe everyone deserves to see, hear, and feel the advancements made in today's AV world without having to break the bank. BZBGEAR is the solution for small to medium-sized applications requiring the latest professional products in AV.

We live in a DIY era where resources are abundant on the internet. With that in mind, our team offers system design consultation and expert tech support seven days a week for the products in our B7PGSAP catalog. You'll notice commercially lower prices with B7PGSAP solutions, but