MACD1122WW - USB Drive JUNG - Free user manual and instructions

Product Type	Multimedia Connection System (Wall Socket)
Brand	JUNG
Model	MACD1122WW
Reference Number	MA..
Color	White
Installation Depth	14 mm (minimum)
Ambient Temperature Range	-5 to +45 °C
Contact Material	Gold-plated
Insertion Cycles (Typical)	500 to 1000 cycles
Compatible Connector Types	Cinch Audio, TRS 3.5 mm, S-Video, VGA, HDMI, USB
Rated Voltage (Audio)	DC 50 V
Frequency Range (Audio)	20 Hz – 20 kHz
Contact Resistance (Audio)	≤ 20 mΩ
Insulation Resistance (Audio)	≥ 100 MΩ
Electric Strength	AC 500 V~ (50/60 Hz) for 1 min, 2 mA
VGA Resolution Support	800x600 to 1280x1024 pixels (S-VGA compatible)
HDMI Compatibility	HDMI 20a (likely HDMI 1.4 or higher)
Safety Instruction	Installation only by qualified electricians
Application	Signal transmission between multimedia devices

Frequently Asked Questions - MACD1122WW JUNG

What is the JUNG MACD1122WW multimedia connection system?

It is a wall-mounted multimedia connection system that allows you to connect various signal sources (e.g., DVD players, MP3 players) to playback devices (e.g., TVs, stereo systems) using different connector types like Cinch, S-Video, USB, TRS, VGA, and HDMI.

Can I install the multimedia connection system myself?

No, installation must be carried out by a qualified electrician in accordance with relevant accident prevention regulations to avoid damage, fire, or other hazards.

What types of devices can I connect?

You can connect devices such as audio systems, AV receivers, TVs, projectors, DVD/Blu-ray players, game consoles, PCs/laptops, printers, storage media, digital cameras, and MP3 players, depending on the connector type used.

Why is there no signal on my TV after connecting?

Possible causes: the playback device is not switched on, or the connector is loose. Switch on the playback device and check that all connections are properly seated.

Why is there no video signal?

The signal source may not be recognized by the playback device. Try manual selection of the signal source via remote control. If using VGA, ensure the VGA output on the source is activated.

Why is there no audio signal?

Check the volume control on both the signal source and playback device. Make sure the mute function is deactivated on the playback device.

What is the maximum cable length for proper signal transmission?

Proper signal transmission is only ensured when the specified maximum cable lengths are observed. The manual does not specify exact lengths, but recommends using appropriate accessories and maintaining a minimum distance of 0.3 m from current-carrying cables and sources of interference.

How do I clean the multimedia socket?

Clean the socket with a dry, soft cloth. Avoid using water, solvents, or abrasive cleaners. Ensure the device is disconnected from any power source before cleaning.

Can I connect a USB flash drive directly to this system?

The multimedia connection system includes a USB connector, so you can connect USB storage media such as flash drives, provided the playback device supports USB input. However, the system primarily acts as a passthrough for signal transmission.

What is the minimum distance required from power cables?

A minimum distance of 0.3 meters from current-carrying cables and sources of interference (e.g., electronic ballasts, dimmers) is recommended to ensure proper signal transmission.

USER MANUAL MACD1122WW JUNG

Multimedia connection system

Ref.-no.: MA..

Operating Instructions Multimedia connection system

Close-up of a white electrical socket with three colored pins (no text or symbols visible)

1. Safety instructions

Electrical equipment must only be installed and assembled by qualified electricians.

Always follow the relevant accident prevention regulations. Failure to comply with these instructions may result in damage to the device, fire or other hazards.

Proper signal transmission is only ensured when the appropriate accessories are used and the specified maximum cable lengths are observed, as well as the minimum permissible distance of 0.3m from current-carrying cables and sources of interference (electronic ballasts, dimmers, ESLs, etc.) are observed.

These operating instructions are an integral component of the

JUNG

Multimedia connection system

Ref.-no.: MA..

3.1. Connecting multimedia devices

• Insert connector of the connecting cable from the signal source, e.g. from a DVD or MP3 player, into the jack of multimedia socket.
• Insert connector of the connecting cable from a playback device, e.g. from an LCD/plasma television or stereo system, into the jack of a second multimedia socket.
  ① Insert connectors into the jacks straight and without using force. Twisting or tilting the connector may deform the contacts.

Application examples

Connection	Devices
Cinch	Audio systems, AV receivers, active loudspeakers
S-Video	SAT receivers, televisions, projectors, iPod docking stations, video cameras
USB	iPods, printers, storage media, digital cameras
TRS3.5 mm	MP3 players, CD/DVD players, sound cards, audio systems
VGA	PCs/laptops, projectors, monitors
HDMI	High definition plasma/LCD televisions, SAT receivers, projectors, game consoles, DVD/Bluray players, DVD/HDD recorders, video cameras

Information for electricians

A A - - - - L L .

5.1. Carrying out a functional test

Multimedia connection system is connected.

- Activate the desired functions and check the signal transmission at the signal sources and the playback device, e.g. play a DVD and check picture/sound reproduction on a television set.

The multimedia connection system is ready for operation.

6. Appendix

6.1. Technical data

Cinch Audio

Rated voltage: DC 50 V

Frequency ranges: 20 Hz ... 20 kHz

Contact resistance: ≤ 20 mΩ

Insulation resistance: ≥ 100 MΩ

Electric strength: AC 500 V\~ (50/60 Hz)

for 1 min 2 mA

Insertion and removal forces: 3 ... 25 N

Insertion cycles: ≥ 1000

Gender changer: white (left), red (right)

Contact material:

Installation depth:

Ambient temperature:

gold-plated

14 mm

-5 ... +45 °C

TRS 3.5 mm

Rated voltage: DC 50 V

Frequency ranges: 20 Hz ... 20 kHz

Contact resistance: ≤ 20 mΩ

Insulation resistance: ≥ 100 MΩ

JUNG

Multimedia connection system

Ref.-no.: MA..

S-Video

Rated voltage: DC 50 V

Frequency ranges: ≤ 160 MHz

Contact resistance: ≤ 8

Insulation resistance: ≥ 50 MΩ

Electric strength: AC 500 V\~ (50/60 Hz)

for 1 min 2 mA

Insertion forces: ≤ 44.1 N

Removal forces: 5.88 ... 29.4 N

Insertion cycles: ≥ 1000

Gender changer: S-Video

Contact material: gold-plated

Ambient temperature: -5 ... +45 °C

VGA

Resolution:

≥ 800 x 600 pixels

≤ 1280 x 1024 pixels

S-VGA compatible

Frequency ranges: ≤ 160 MHz

Contact resistance: ≤ 30 mΩ

Insulation resistance:

≥ 1000 MΩ

Electric strength: AC 500 V\~ (50/60 Hz)

for 1 min 2 mA

Insertion forces:

43.9 N

Removal forces:

3.92 N

Insertion cycles:

≥ 500

Gender changer

15pole D-subminiature, 180°

Installation depth:

5 mm

Ambient temperature: -5 ... +45 °C

HDMI

Standard

HDMI 20a

JUNG

Multimedia connection system

Ref.-no.: MA..

Terminal: 180°

Installation depth: 17 mm

Installation note: Consider bending radius and various plug types. Ensure sufficient installation space.

6.2. Troubleshooting

No signal at the playback device after the signal sources is switched

on.

Cause 1: Playback device is not switched on.

- Switch on playback device.

Cause 2: Loose connector.

- Check that all connections are properly seated.

No video signal at the playback device after the signal sources is switched on.

Cause 1: Signal source is not recognised by the playback device.

- Manual selection of the signal source using remote control or channel selection buttons of the player.

Cause 2: VGA output of the signal source is not activated.

- Activate VGA output. Note information of the device manufacturer.

No audio signal at the playback device after the signal sources is switched on.

Cause 1: Volume control on the signal source or on the playback device is set too low.

- Increase volume.

Cause 2: The audio on the playback device is set to mute.

- Deactivate the mute function. Note information of the device