BC-150S - Unspecified Pearl Sports - Free user manual and instructions

Product Type	Closed Hi-Hat Holder
Brand	Pearl Sports
Model	BC-150S
Compatible Pipe Diameter	22.2 mm (7/8")
Material	Metal, Felt
Boom Arm Length	Adjustable (up to approx. 12 in)
Angle Adjustment	Yes, via boom gear
Tilter	Adjustable cymbal tilt via wing bolt
Stop Lock	Prevents boom arm rotation
Key Bolt	For stop lock adjustment
Wing Nut	For boom arm adjustment
Included Parts	Reversible nut, felts, plastic sleeve with spring
Spring	Reattachable to plastic sleeve
Cymbal Stack	Uses bottom and top cymbal with felt washers
Assembly	Requires pipe clamp (not included)
Height Adjustment	Via adaptor/clamp
Usage	Drum set hi-hat
Maintenance	Wipe clean, check screws
Safety	Test stability before playing
Manual Format	PDF (3 pages in English)

Frequently Asked Questions - BC-150S Pearl Sports

How do I attach the BC-150S to my drum rack?

Use a pipe clamp that accommodates 22.2 mm (7/8") diameter pipes. Insert the pipe, adjust height, and tighten the clamp. Then slide the stop lock against the clamp and tighten the key bolt.

How do I adjust the boom arm length?

Loosen the wing nut on the boom gear, slide the boom arm to the desired length and angle, then tighten the wing nut.

How do I prevent the boom arm from rotating?

Use the stop lock: loosen the key bolt, align the tab on the stop lock with the slot in the boom gear, then tighten the key bolt.

How do I set up the hi-hat cymbals?

Remove the reversible nut, felts, plastic sleeve with spring, nut, and felt in order. Place the bottom cymbal on the lower felt, thread the upper felt and nut, and tighten. Then place the sleeve with spring, lower felt, top cymbal, press down, add the upper felt and reversible nut. Adjust the reversible nut for desired tightness.

How tight should the cymbals be?

Adjust the reversible nut: tighten for a choked sound, loosen for more sizzle. Test to your preference.

What if the spring comes off the plastic sleeve?

Reattach the spring securely to the post at the bottom of the plastic sleeve before continuing assembly.

How do I tilt the cymbals?

Loosen the wing bolt on the tilter, adjust the tilt to the desired angle, then retighten the wing bolt.

How do I maintain the holder?

Wipe with a dry cloth. Periodically check and tighten all bolts and screws.

Is the holder stable?

Test stability before playing. If unstable, readjust the boom length or direction until the holder is sufficiently stable.

Can I use the holder with different pipe sizes?

It fits 22.2 mm (7/8") diameter pipes. Ensure your pipe clamp is compatible with that size.

USER MANUAL BC-150S Pearl Sports

PEARL CLOSED HI-HAT HOLDER

CLH-930

Instruction Manual

Congratulations on your purchase!

To get optimum performance of your CLH-930 Closed Hi-Hat Holder, please read this Instruction Manual before playing.

Attaching the CLH-930 to Adaptor/Pipe Clamps

Loosen the Key Bolt on the Stop Lock on the Pipe with a Tuning Key to allow the Stop Lock to slide but don't remove it. Insert the Pipe into an Adaptor or Pipe Clamp that accommodates 22.2 mm (7/8") diameter pipes. Adjust the height and tighten the Adaptor / Pipe Clamp. Slide the Stop Lock against the Adaptor / Pipe Clamp and tighten the Key Bolt with a Tuning Key. The Boom Arm is housed inside the Pipe. Loosen the Wing Nut on the Boom Gear and adjust the length and angle of the Boom Arm. Tighten the Wing Nut to secure the position. The Boom Arm is equipped with a Stop Lock that prevents the Boom Arm from slipping or rotating. Loosen the Key Bolt on the Stop Lock and position the tab on the Stop Lock into the slot in the Boom Gear. Tighten the Key Bolt to secure. Loosen the Wing Bolt on the Tilter to change the tilt of the Cymbals. Retighten the Wing Bolt to secure the setting.

Attaching the Hi-Hat Cymbals

Remove the Reversible Nut, Felts, Plastic Sleeve with Spring, Nut, and Felt in the order shown (Fig. 1).

Fig. 1

Note

If the Spring comes off from the Plastic Sleeve, reattach it securely to the post at the bottom of the Plastic Sleeve before proceeding.

Place the Bottom Cymbal on the lower Felt as shown. Thread the upper Felt and Nut on the Cymbal Post and tighten the Nut to secure (Fig.2).

Fig. 2

Place the Plastic Sleeve with Spring over the Cymbal Post followed by the lower Felt and the Top Cymbal as shown. Press the Top Cymbal downward and attach the upper Felt and Reversible Nut as shown. Adjust the tightness of the Reversible Nut to control the amount of tightness or looseness of the Cymbals (Fig.3).

Fig. 3

CAUTION

Test the stability of the Holder before using. If necessary, readjust the length of the boom and / or the direction of the boom until the Holder is sufficiently stable.