OPTICAL HDMI CABLE FOR 4K@60HZ - Computer Accessories Kramer - Free user manual and instructions

Product Type	Fiber Optic HDMI Cable
Model	CRS-AOCH/COLOR (OPTICAL HDMI CABLE FOR 4K@60HZ)
Connector Type	HDMI Type A Male (Source: Green, Display: Red)
Video Resolution	Up to 4K@30Hz, 1080p Full HD, Deep Color 48-bit, 3D
Audio Support	PCM 8ch, Dolby Digital True HD, DTS-HD Master Audio
HDMI Compliance	HDCP 2.2, EDID, CEC
Pixel Clock Rate	300 MHz
Cable Length Options	33ft (10m), 50ft (15m), 66ft (20m), 98ft (30m), 131ft (40m), 164ft (50m), 197ft (60m), 230ft (70m), 262ft (80m), 295ft (90m), 328ft (100m)
Cable Diameter	4.5 mm
Jacket Material	TPU (Thermoplastic Polyurethane)
Minimum Bending Radius	90 mm
Maximum Pulling Strength	500 N (50 kg)
Maximum Compression Load	500 N (50 kg)
Power Supply	+5V DC from HDMI pin #18 (source side)
Power Consumption	0.25 W
Operating Temperature	0° to +50°C (32° to 122°F)
Storage Temperature	-30° to +70°C (-22° to 158°F)
Operating Humidity	5% to 85% RHL non-condensing
Connector Dimensions	7.07 x 1.96 x 1.12 cm (W x D x H)
Weight	Varies per length (see manual)
Maintenance	Clean with a soft, dry cloth. Keep connectors dust-free; avoid liquids.
Safety	Do not bend beyond 90mm radius. Do not disassemble connectors. Use dust caps until installation. Ensure pulling strength does not exceed 500N.
Spare Parts	None; the cable is not user-serviceable.
General Information	Plug and play; unidirectional (source to display). Use green end for source, red end for display.

Frequently Asked Questions - OPTICAL HDMI CABLE FOR 4K@60HZ Kramer

What is the maximum resolution supported?

The cable supports video resolutions up to 4K@30Hz, including 1080p Full HD, 3D, and Deep Color 48-bit.

Is this cable directional?

Yes, the cable is directional. The green connector should be connected to the source device, and the red connector to the display device.

What lengths are available?

The cable is available in lengths from 33ft (10m) up to 328ft (100m), with various options in between.

Does it support HDR content?

While not explicitly labeled HDR, it supports Deep Color 48-bit, which is compatible with HDR content. The maximum resolution is 4K@30Hz.

Can it be used outdoors?

The cable is designed for indoor use. The operating temperature range is 0° to +50°C and storage from -30° to +70°C. The TPU jacket provides some protection, but avoid direct exposure to weather.

How do I clean the cable?

Use a soft, dry cloth to clean the cable and connectors. Do not use liquid cleaners or abrasive materials.

What is the power consumption?

The cable consumes 0.25W and draws power from the source device via HDMI pin #18.

Is it compatible with HDMI 2.0 devices?

It supports HDCP 2.2 and can be used with HDMI 2.0 devices, but the maximum resolution is limited to 4K@30Hz (HDMI 1.4 bandwidth).

Can I use it with a game console?

Yes, connect the green end to the console (source) and the red end to the TV or monitor (display).

What should I do if the cable doesn't work?

Check that both devices are powered on, connectors are fully inserted, the cable is not kinked or damaged, and the source and display ends are correctly oriented. If problems persist, test with another device.

USER MANUAL OPTICAL HDMI CABLE FOR 4K@60HZ Kramer

Installation Instructions

MODEL:

CRS-AOCH/COLOR

Fiber Opc HDMI Cable

P/N:

Rev:

SAFETY WARNING

Disconnect the unit from the power supply before opening and servicing

For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found.

We welcome your questions, comments, and feedback.

www.kramerAV.com

[e-mail]

CRS-AOCH/COLOR Fiber Optic High Speed Pluggable HDMI Cable

Congratulations on purchasing your Kramer CRS-AOCH/COLOR Plug and Play active Fiber Optic High Speed Pluggable HDMI Cable. The CRS-AOCH/COLOR provides an extremely high quality signal over a wide range of resolutions, up to 4K@30Hz. This cable is available in various lengths from 33ft (10m) up to 328ft (100m).

Features

The CRS-AOCH/COLOR:

• Supports a wide range of resolutions up to 4K@30Hz Full HD, 3D, Deep Color
• Supports Multi-channel audio, Dolby True HD, DTS-HD Master Audio
• Is HDMI compliant: EDID, CEC, HDCP
- Inherently provides protection from electromagnetic interference (EMI) and radio frequency interference (RFI)
- Has built-in powering with low power consumption
- Has high pulling strength

Cable Dimensions

The CRS-AOCH/COLOR includes four optical fibers and six AWG 28 wires with compact size HDMI connectors. The cable has a SOURCE green colored end to which the source is connected (for example, a DVD, Blu-ray or game console box) and a DISPLAY red colored end to which the acceptor is connected (for example, a projector, an LCD display or a tablet device), see Figure 1.

Figure 1: HDMI Connectors – SOURCE and DISPLAY (with Dimensions)

CRS-AOCH/COLOR Plug and Play Installation

Before installing the cable, make sure that you have an HDMI graphic card or devices with an HDMI port (for example, a PC, laptop, DVD/Blue-ray player or any other video/audio signal source devices).

Kramer CRS-AOCH/COLOR Fiber Optic HDMI cables are designed to take +5V DC power from the source devices to the HDMI pin #18 of the SOURCE

side connector on the cable.

Optical fiber cable is not robust physically compared to conventional copper cable materials. Even if this cable is designed to be seamlessly resistant at certain levels of artificial strengths to the cable, CRS-AOCH/COLOR can be damaged if it is excessively pinched, twisted or kinked when being installed and after being installed. Be careful not to bend or twist the cable tightly.

When CRS-AOCH/COLOR is installed into the conduit, the fiber pulling strength and the bending radius are the key conditions to safe installation of the cable:

Maximum fiber bending radius: 90mm

Maximum fiber pulling/tensile strength: 50kg (500N)

Crush Resistance: 50kg (500N)

Do not disassemble or modify the products, especially the HDMI connector head parts. Do not remove the dust plug before the cable laying process is completed. HDMI connector heads are very critical parts. Remove the head at the last moment just before the connector is plugged into the source or the display devices after the installation is complete.

To install the CRS-AOCH/COLOR:

1. Unpack the cable from the package with care and remove the cable tie. We recommend that you save the original box and packaging materials for possible future shipment.
2. Install the cable (for example, an in-wall or conduit installation or under-floor installations).
3. Once the cable installation is complete, remove the dust cap and plug the SOURCE green connector head of the cable into the source devices.

Do not plug the SOURCE green connector to the display device.

1. Remove the dust cap and plug the DISPLAY red connector head of the cable into the display devices.

Do not plug the DISPLAY red connector to the source device.

1. Switch on the power of source and display devices.

Troubleshooting

If you have encountered a problem, check that:

• The source and display devices are both switched on
• Both HDMI connector heads are fully plugged into the devices
• The cable or its jacket is not physically damaged
  • The cable is not bent or kinked

Specifications

Audio and Power
Video Resolution:	Up to 4K@30Hz; 1080p Full HD Deep Color 48bit, 3D
Embedded Audio Support:	PCM 8ch, Dolby Digital True HD, DTS-HD Master Audio
HDMI Compliance:	HDCP 2.2, EDID, CEC
Pixel Clock Rate:	300MHz
DDC Signal Input:	5.0V
Cable Assembly
HDMI Connector:	Male HDMI Type A Connector
HDMI Connector Dimensions:	7.07cm x 1.96cm x 1.12cm (2.78" x 0.8" x 0.44") W, D, H
Cable Structure:	Hybrid Optical Fiber Cable
Cable Jacket Material:	TPU (Thermoplastic Polyurethane)
Cable Diameter:	4.5mm
Cable Bending Radius:	90mm
Max. Pulling strength:	500N (50kg, 110lbs)
Max. Compression load resistance:	500N (50kg, 110lbs)
Power
Power Supply HDMI:	PIN # 18 (draws current from the source)
Power Consumption:	0.25W
General
Operating Temperature:	0° to +50°C (32° to 122°F)
Storage Temperature:	-30° to +70°C (-22° to 158°F)
Operating Humidity:	5% to 85%, RHL non-condensing
Available Size:	33ft (10m), 50ft (15m), 66ft (20m), 98ft (30m), 131ft (40m), 164ft (50m), 197ft (60 ft) 230ft (70m), 262ft (80m), 295ft (90m) and 328ft (100m)
Weight:	Weight changes per length