Sports RH948KX9 - Wristwatch Lorus - Free user manual and instructions

Product Type	Watch
Brand	Lorus
Model	Sports RH948KX9
Category	Sports Watch
Movement	Quartz
Display	Analog
Calendar	Day and Date
LumiBrite	Yes – stores light and glows in dark
Crown Positions	2 (first for day/date, second for time)
Band Type	Sliding clasp with adjustable length
Battery Type	Silver oxide (common, e.g., SR626SW)
Battery Life	Approximately 2-3 years under normal use
Water Resistance	Not indicated on dial; refer to case back for rating
Care Instructions	Avoid strong magnetism, shocks, extreme temperatures
Allergic Reaction	Clean regularly; if rash occurs, stop wearing and consult physician
Service	Refer to enclosed warranty or qualified watch repair
Band Adjustment	Use small screwdriver to slide clasp, ensure grooves lock
Time Setting	Pull crown to second click, rotate to set time; for quartz, advance 4-5 min then back

Frequently Asked Questions - Sports RH948KX9 Lorus

How do I set the time on my Lorus Sports RH948KX9?

Pull the crown out to the second click position. The second hand will stop. Rotate the crown to set the time. For accuracy, advance the minute hand 4-5 minutes ahead of correct time, then turn it counterclockwise to the desired time. Push the crown back in.

How do I set the day and date?

Pull the crown out to the first click position. Rotate the crown to set the date. For day (Cal. PC33), turn the crown clockwise and counterclockwise between 11:50 PM and 3:50 AM to select desired day/language. Avoid setting day/date between 9:30 PM and 4:00 AM to prevent misalignment.

What is LumiBrite and how does it work?

LumiBrite is a luminous material that stores light energy from natural and artificial sources and glows in the dark. After exposure to bright light (e.g., 600 lux for 10 minutes or direct sunlight for 2 minutes), it glows for hours. The brightness decreases gradually.

Is my Lorus watch water resistant?

Water resistance is indicated on the dial or case back. If no marking, the watch is not water resistant. For models with 50M, 100M, or 200M ratings, they are suitable for swimming or diving as marked. Do not operate buttons or crown when wet.

How do I replace the battery?

When the battery runs down, replace it promptly to avoid malfunction. We recommend taking the watch to a local jeweler or watch repair shop. Dispose of old batteries properly; do not recharge or expose to fire. Keep away from children.

How do I adjust the band length?

Use a small screwdriver to lift the adjusting flap on the sliding clasp. Slide the clasp to the desired size, ensuring the grooves on the lock side fit into the convex portion, then close the flap securely.

How should I clean my Lorus watch?

Clean the case and band regularly to prevent skin irritation. Use a soft cloth. If exposed to salt water, rinse in fresh water and dry thoroughly. Avoid using chemicals.

Can I wear my watch in strong magnetic fields?

Strong magnetism can adversely affect the accuracy of your watch. Keep away from magnetic objects such as speakers, refrigerators, or MRI machines.

What should I do if I develop a rash from wearing the watch?

Stop wearing the watch immediately and consult a physician. Clean the watch regularly to avoid buildup of dirt or sweat that may cause irritation.

Where can I get service for my Lorus watch?

Refer to the enclosed warranty card for authorized service centers. Alternatively, take the watch to a reputable watch repair shop. Do not attempt to disassemble the watch yourself.

USER MANUAL Sports RH948KX9 Lorus

■HOW TO USE NON-CALENDAR MODEL

Put the crown OUT to the FIRST clock and set the time, then push the crown IN.

Note: When you set the time, first set the minute hand to a properly devorsed time. Then return the rule hand to be correct time by turning it COUN TRECLOCKWISE.

■HOW TO USE DAY/DATE MODEL

The day of the week can be displayed by lingually (English/another language) and you can select other

1. How to set the day and date
   

Put out the crown to the first click position. (The crown of the woman can be outdoors to the second click position.)

Day selling for Cal. PC33

At the second click position, I am the non-clockwise and counter-clockwise repeatedly between 11:5 pm and 3:5 cm to select the desired day and language.

Note: Do not attempt to set the day and date between the times of 9:30 am and 4:00 am as this may cause the day and do e d solays to change out of sequence.

1. How to set the time
   

Put out the crown to the second click position and the second hand stops the second hand should be slipped on 12 o'clock position.

- So sure to check that the AM/PM is correctly set. (The day and date are designed to change once every 24 hours) - To adjust the correct time for a quartz watch, it is necessary to advance the minute hand 4 c-5 minutes ahead of the correct time one then turn it count/sclockwise to set the designated time

LUMIBRITE WATCH

* I your watch is a LORUS LUM BRILL watch. It has to low ng features.

LORUS LUMBER TE watches closer and store light energy from natural and artificial light sources and on light in the dark. They are made of environmentally friendly materials, and therefore, are harmless to human beings and the environment.

- With a full charge, LORUS LUMIBRTE watches grew in the one hours longer than conventional luminous watches of this type. It exposed to a light of more than 600 Lux (i.e., too brightness of dry cal grico) for approximately 10 minutes or direct sunlight for 2 minutes, they will grow for hours. - Since LORUS LUMIBRTE watches emit the light they store, the brightness will decrease gradually over time. The length of time they will glow may also differ slightly depending on such factors as the brightness of and distance from the light source used to charge the watch.

BATTERY CHANGE

As the battery is inserted of the factory to check the function and performance of the watch. Is so dull. He once in your possession may be less than the special period.

Be sure to replace the battery to prevent any possible malfunction as soon as it runs down. To replace the battery, we recommend taking the watch to a local watch retainer.

■ CARE OF YOUR LORUS WATCH

BATTERY

CAUTION

Do not expose the old battery to fire or recharge it. Keep it at a place beyond the reach of children. If a child swallows it, consult a doctor immediately.

- WATER RESISTANT

Name or Standard Indicator or Date (see Table)	Not specified with a other a) applies of 12.1	5-mining at listing a water	3-min dark
No Indication	NO	NO	NO
WATER RESISTANT	Yes	NO NO	NO
WATER RESISTANT* (100N/10 BAR) at above	YES	YES NO	NO
WATER RESISTANT* (100N/10 BAR) at above	YES	YES YES NO

* If your watch is 200 M/23 BAR, 100 M/10 BAR or 50 M/s BAR water resistant, it is so indicated on the clo /case book
- Be to press the buttons or turn the crown when the watch is wet.
• I the water is exposed to salt water, since it in fresh water can then wine thoroughly

Caution:

Logather shops are no water resistant except so indicated, even if the watch hecd is water resistant.

- ALLERGIC REACTION

Because the case and band touch the skin directly, it is important to clean their regularity. If not, shirt sleeves may be saline and those with delicate skin may develop a mask. Please wear the watch with some pay to avoid any possible charge a reaction. If you develop a rash on your wrist, stop wearing and consulting physician.

• MAGNETISM

Your watch will be adversely affected by strong magnetism. Keep flow away from close contact with natural causes.

- SHOCKS AND VIBRATIONS

Your watch may be worn for rental spots activities, but be careful nor to drop it or hit it on hard surfaces.

• TEMPERATURE

Your watch is preadjusted so that constant accuracy may be insured at hotel temperature.

SERVICE

When your LCRS watch requires reset or providing, please see the enclosed WARRAN Y/QUARANLE

■HOW TO ADJUST BAND LENGTH

Sliding clasp band

1. Try up the adjusting fao with a small screwdriver or something with a sharpened tip.

2. Slide the close to adjust it to a desired size.

3. The grooves on the lock side of the correct should fill into the convex portion on the close, then close the adjust flop.

- Wrong method

If you do this way, the adjusting flap may be destroyed.

Eruited a library