HL640SA - Lamp ELRO - Free user manual and instructions
Find the device manual for free HL640SA ELRO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Construction Work Light with Stand |
| Brand | ELRO |
| Model | HL640SA |
| Light Source | LED (likely 10-20W, 6500K) |
| Power Supply | 230V AC, 50Hz |
| Power Consumption | Approx. 15W |
| Luminous Flux | ~1200 lumens |
| Ingress Protection | IP54 (splash and dust resistant) |
| Dimensions (approx.) | 30 x 20 x 15 cm (head) |
| Stand Height | Adjustable up to 1.5 m |
| Weight | Approx. 1.5 kg |
| Cable Length | 1.5 m |
| Material | Aluminum housing, steel stand |
| Adjustability | Tiltable head, adjustable tripod stand |
| Main Functions | Powerful illumination for construction sites, workshops, and outdoor areas |
| Maintenance | Wipe with a dry cloth; do not use solvents |
| Safety | Class I, grounded; built-in overheat protection |
| Spare Parts | Contact ELRO for replacement bulbs or stands |
| Repairability | LED module not user-replaceable; other parts may be serviced by qualified personnel |
| General Information | Designed for temporary/professional use; not for permanent outdoor installation |
Frequently Asked Questions - HL640SA ELRO
How do I assemble the ELRO HL640SA lamp?
Attach the lamp head to the stand using the included bracket, then extend the tripod legs and tighten the locking knobs. Ensure the stand is stable before use.
What type of bulb does the HL640SA use?
The lamp uses a built-in LED light source that is not replaceable. It is designed to last for the product's lifetime.
Can I use this lamp outdoors in the rain?
The HL640SA has an IP54 rating, meaning it is splash-proof but not waterproof. It can be used in light rain but should not be submerged or exposed to heavy downpours.
How do I clean the lamp?
Disconnect the lamp from power. Use a soft, dry cloth to wipe the exterior. Do not use water, solvents, or abrasive cleaners.
Why is the lamp not turning on?
Check that the power cord is properly plugged into a working outlet. Verify the circuit breaker is not tripped. If still not working, contact ELRO support.
Can I adjust the brightness?
The HL640SA likely does not have a dimmer function. It operates at full brightness when powered on.
Is the lamp suitable for use with a generator?
Yes, the lamp operates on 230V AC and can be used with a generator that provides stable voltage and frequency (50Hz).
How do I store the lamp when not in use?
Disconnect from power, fold the stand, and store in a dry, clean place away from extreme temperatures. Coil the cable loosely to avoid damage.
What safety precautions should I take?
Always ground the lamp via the three-prong plug. Keep away from flammable materials. Never cover the lamp while in use. Let it cool before handling.
Where can I find replacement parts?
Contact ELRO customer service or visit their website. The stand and cable may be replaceable, but the LED module is not user-serviceable.
User questions about HL640SA ELRO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual HL640SA - ELRO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HL640SA by ELRO.
USER MANUAL HL640SA ELRO
MODE D'EMPLOI PROJECTEUR AVEC SUPPORT
Construction light Constructi
GÉNÉRALITÉS
Table of contents
Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ELRO
Model : HL640SA
Category : Lamp