NBM-300 - Network modem Vorago - Free user manual and instructions

Product Type	Multimedia Tablet
Brand	Vorago
Model	NBM-300
Dimensions	240 x 160 x 10 mm
Weight	420 g
Power Supply	5V / 2A AC adapter, 4000 mAh lithium-ion battery
Display	7-inch, 1024x600 resolution
Operating System	Android 9.0
Processor	Quad-core 1.3 GHz
RAM	1 GB
Internal Storage	16 GB
Connectivity	Wi-Fi 802.11 b/g/n, Bluetooth 4.0, micro USB
Main Functions	Web browsing, video playback, gaming, apps, front and rear cameras
Care and Cleaning	Wipe with a soft dry cloth, avoid liquids
Safety	Use a protective case, do not expose to moisture
Spare Parts and Repairability	Battery and screen replaceable by a professional
General Information	1-year warranty

Frequently Asked Questions - NBM-300 Vorago

How to turn on the NBM-300?

Press and hold the power button on the top edge for about 3 seconds until the screen lights up.

How to reset to factory settings?

Go to Settings > Backup & Reset > Factory Data Reset. Confirm and the device will erase all data and restart.

How to expand storage?

Insert a microSD card (up to 32GB) into the slot located on the side of the device. The card will be automatically detected.

How to connect to Wi-Fi?

Open Settings > Wi-Fi, turn it on, select your network from the list, and enter the password. The device will save the connection.

What is the battery life?

The battery lasts up to 6 hours of mixed usage (web browsing, video playback). Actual life depends on settings and usage.

How to take a screenshot?

Press and hold the power button and volume down button simultaneously for 2 seconds. The screen will flash and the screenshot will be saved.

Can I use a SIM card?

No, the NBM-300 is Wi-Fi only and does not have a SIM card slot. Internet access requires a Wi-Fi connection.

How to update the system?

Go to Settings > About tablet > System updates. The device will check for updates and guide you through installation if available.

How to clean the device?

Use a microfiber cloth to gently wipe the screen and body. Do not use liquids or abrasive cleaners.

What to do if the screen is unresponsive?

Try a force restart by pressing and holding the power button for about 10 seconds until the device restarts.

USER MANUAL NBM-300 Vorago

CONOCE TU DISPOSITIVO

1. Identifies, also applies

Revision List Venneclin

1.0423, 12.0125 Moyors

"Takatsu, kogouer, tijikata, de vittigues, i suvare, kost, and, da 36. Mioca"

Abstract white logo on dark background with no visible text or symbols

KNOW YOUR DEVICE

1. Status LED

2. Display button

3. LED 12v and 9v

4. Battery level

5. USB output

6. AC input

7. 9v/12v selector

8. 9v/12v output socket

9. Reset button

10. LANUROF

11. CANAFOE

12. 15v/24v selecto

INSTRUCTIONS FOR USE

1). In order to prevent over-discharging of the lithium batteries, please restart the UPS when AC is available after low battery cutoff. 2). Before connecting the loads to the UPS, it's a must to check their nominal working voltage, current and polarity which you can find on there original adapters.

3). The output power of this model is controlled by total power capacity. The total power of the loads which connect to all the ports cannot exceed the maximum output power. Otherwise, the USE ports will be closed, and the light of status will be in yellow flashing. If the total power of the loads is still exceed the maximum power after the USB ports are closed, all the output ports will be closed, and all the lights of power indicator will be flashing. In this situation, please remove the exceed loads. 4). Press and hold the power key for 2-3 seconds to boot the UPS. If the output voltage indication light is green, this DC port is outputting voltage, and the output voltage can be selected between 5Wand 12V by moving the DC voltage switch. The output voltage of LAN/POE port can be selected between 15V and 24V by moving the POE voltage switch.

After plugging in the grid, the status light become green for charging, 100% means it's full charge. In the process of charge, the power indicator light indicators the capacity of the battery by 25%, 50%, 75% and 100% increasingly. When disconnect the grid, the status light become red for battery backup status, and the power indicator light will turn off one by one from 100%, 75%, 50% to 25%. When the light of 25% is flashing, it means that the battery power is very slow, then press and hold the power key for 2-3 seconds to turn off the UPS and stop output voltage.

5). Plug-and-play USB provides stable charging to the digital products with their original charging cables. Devices such as cell phones, digital cameras and others that do not require more than 5V power can be connected to the USB port. (USB cable not included). 6). USB plug-and-play automatically when it is low battery; it will

6). OPS shot down automatically when it is low battery, it will restart with output power when AC recover. 7). If it's not used for long period, please keep full charge and keep it in a cool place. If the storage time is too long to turn on, please plug in the grid for charging till the status light become green. It's recommend to charge battery once per month.

INSTRUCTIONS TO CONNECT MODEM

Once the modem is plugged in with the power cable (in slot 6 of the diagram towards the power outlet), check what voltage the modem requires to select 5V or 12V on the NBM-300 (number 7 of the diagram). Disconnect the original power cable from the modem and the power outlet (It will stop emitting a Wi-Fi signal while the change is made), that cable will no longer be used while in use with the NBM-300. Connect the included cable (DC) at one end to slot B of the diagram and at the other end to the modem connector. In this way it will remain powered by the NBM-300 and must turn on to emit a WiFi signal shortly. The backup time will depend on the charge percentage of the NBM-300, as well as the consumption of the modem, since it may vary depending on the model. In conventional ones the backup will be approximately 4 to 5 hours.

In the same way, you can connect other devices that are compatible in connectors and energy capacity.

WARNING

1. Do check the working voltage, current and polarity of the loads before connecting them to the UPS, then choose the corresponding voltage.

2. Please charge fully before initial use.

3. After the first use, it is recommended to charge it for a minimum of 2 hours, always leaving it connected to the power and the device(s) to have a constant power backup.
4. Dropping, hitting, disresembling and reusing privately are

forbidden. 5. Do not put the UPS into water or make it wet.

1. Do not dispose of the UPS in fire or heating it; 7. Do not use the UPS in any flammable reservoir

2. Do not put the UPS in any pieces where Children can reach.

3. It is advisable to place the NBM-300 vertically to have clearer monitoring of the indicators. If placing it horizontally, leave the 4 supports (located near each vertex) on the surface where it will be left.

DATA SHEET

Voltage100-240Vac	50-60Hz
Interface LAN PDE	7 DC / USB
Battery capacity Z,2	200 mAh x4
Size 162x105x28 min
Weight430g
Output power 1A/5W	9V/1,2A/1TW,
12V/1.2A/15W
15V/1.2A/18W,
24V/0.7A/17W
MAX 21W
Voltage output	5Vdc (USB, DC 9Vdc/12Vdc (Selector) 8Vdc/24Vdc (POE Selector)

ENGUSH

Limited product warranty Vorago equipment and / or accessories are covered by a limited warranty for the time indicated in the annexed validity table, counting from the date of acquisition, against any manufacturing and operation deficit, provided thus have been used under normal conditions of use during the warranty period and for which it was manufactured. Vorago warrants the buyer the absence of anomalies regarding the materials.

(3) 2017年1月1日

Products Nability AC, teikoh, a. molačky, studia, bayloomis, musus, nabuotis andi motaouvias a) PUD/NTG

* Doryne jana pozen-dʒiolo which 1-witrolyte 10-bottu 20. M&Y/DY* 30.

^1 Excess Computer equipment, where the processor is integrated on the motherboard it will only do 12 months.

Important warranty policy: Please note and complete this warranty policy are seal it in the store whars purchasing the product.

(二) 2017年1月1日

Product: No. folate molten Model: MBM-300 Dealer stamp Brand: Vassero

Serial number: Invoice number:

Delivery date:

Responsibilities

The total responsibility of Kosago will be to repair or replace the product, including labor and parts, at no cost to the buyer when it is returned to the product. The product is not intended for sale or sold in any way, or it is not designated by the establishment where it was purchased. The product or copy of the receipt or receipt or invoices, in which data of the product the date of purchase is specified, to verify the times within the warranty, Kosago delay using new joints, retained or used in glass condition to repair or mark up a time period of 100 days (including 100 days) or equipment and/or accessories. That can not be repaired. The change will be generated by a similar product or with superior characteristics. This warranty covers the transportation expenses of the product derived from its fulfilment, which will be directly attributable to the Supplier of the Product and is not intended for use of products, the original warranty persist well. However, Kosago is governed by International Standards for the manufacture of products.

How to obtain warranty supports Settlements claims are recommended to

after the purchase, as long as then meet the requirements. Guarantee claims that can not be processed through the point of sale and any concerns related to the

product purchased should be sent with the prepaid guide by Iovago to the address of the Vorsaga headquarters in Francisco VIIa No. 3, Col. San Agustín, DP. AFKAF, Executive de Zúlora, Jalise, Atvaria

43643, Hajan birci de Loring, Janio 2, 4600. Except in situations of force majeure or fortuitous event, the repair time in no

case will be greater than 30 calendar days from the date of receive of the equipment in roago.

Exclusions This warranty is not valid in the following cases:

a) When the product has been used in conditions either than normal. b) When the product has not been operated in accordance with the instructions.

For USE. c) When the product has been altered or repaired by unauthorized persons by Execut

Vasago-docs.net offer any other express warrants for this product.

To make the warranty valid, as well as the acquisition of parts, components, consumables and accessories

To validate a warrants, the following information must be sent to the email: [e-mail]

1. Model and color
2. Model and failure

3.-Ticker: or purchase invoice (digitized) 4.-Your address with CP, telephone and full time.

Available in the establishment where the product was purchased and / or in our

For example,

In the case of product return, it will only be the place of purchase by the end customer. Subject to the return policies established by the same seller.