OV 647 TSI - Cooker Arçelik - Free user manual and instructions

USER MANUAL OV 647 TSI Arçelik

OV 647 TSIOV 647 TSI

Please read this manual first. Please read this manual first.

Dear Customer,

We would like you to obtain the best performance from your product which has been manufactured in modern facilities and under strict quality control procedures.

Therefore, we advise you to read through this User Manual carefully before using your product and keep it for future reference. If you hand over the product to someone else, deliver the User Manual as well.

The User Manual will help you use the product in a fast and safe way.

• Read the User Manual before installing and operating the product.
• You must strictly observe the safety instructions.
• Keep this User Manual within easy reach for future reference.
• Also read other documents supplied with the product.
  Remember that this User Manual may also be applicable for several other models.
  Differences between models are explicitly identified in the manual.

Explanation of symbols

Throughout this User Manual the following symbols are used:

Important information or useful hints about usage.

Warning for hazardous situations with regard to life and property.

Warning for electric shock.

Warning for risk of fire.

Warning for hot surfaces.

1 General information 4

Overview 4

Technical specifications 4

2 Important safety instructions 6

General safety 6

Intended use 6

Safety for children 6

Safety when working with electricity 7

3 Installation 8

Before installation 8

Installation and connection 9

Disposal 10

Package information 10

Future Transportation 10

Disposing of the old product 10

4 Preparation 11

Tips for saving energy 11

Initial use 11

First cleaning of the appliance 11

Initial heating 11

5 How to use the hob 12

General information about cooking 12

Using the hobs 12

Control panel 13

6 Maintenance and care 21

General information 21

Cleaning the hob 21

7 Troubleshooting 22

1 General information

Overview

1 2 6 5 4 3

1 Single-circuit cooking plate
2 Extended cooking plate
3 Assembly clamp

4 Vitroceramic surface
5 Base cover
6 Dual-circuit cooking plate

Technical specifications

Voltage / frequency	220-240 V ~ 50 Hz
Total power consumption	6900 W
Fuse	min. 16 A x 3 / 32 A
Cable type / section	H05RR-F3 x 2,5 mm ^2
Cable length	max. 2 m
External dimensions (height / width / depth)	55 mm/580 mm/510 mm
Installation dimensions (width / depth)	560 mm/490 mm
BurnersE
Rear left	Single-circuit cooking plateci
Dimension	140 mm
Power	1200 W
Front left	Dual - circuit cooking plateci
Dimension	120/210 mm
Power	750/2200 W
Front right	Single-circuit cooking plateci
Dimension	160 mm
Power	1500 W
Rear right	Extended cooking plateE>
Dimension	140/250 mm
Power	1100/2000 W

Technical specifications may be changed without prior notice to improve the quality of the product.

Figures in this manual are schematic and may not exactly match your product.

Values stated on the product labels or in the documentation accompanying it are obtained in laboratory conditions in accordance with relevant standards. Depending on operational and environmental conditions of the product, these values may vary.

2 Important safety instructions

This section contains safety instructions that will help you avoid risk of injury and damage. All warranties will become void if you do not follow these instructions.

General safety

• This product is not intended to be used by persons with physical, sensory or mental disorders or unlearned or inexperienced people (including children) unless they are attended by a person who will be responsible for their safety or who will instruct them accordingly for use of the product. Children must be supervised to prevent them from tampering with the product.
• Connect the product to an earthed outlet/line protected by a fuse of suitable capacity as stated in the "Technical specifications" table. Have the earthing installation made by a qualified electrician while using the product with or without a transformer. Our company shall not be liable for any problems arising due to the product not being earthed in accordance with the local regulations.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similar qualified persons in order to avoid a hazard.
• Do not operate the product if it is defective or has any visible damage.
• Do not carry out any repairs or modifications on the product. However, you may remedy some troubles that do not require any repairs or modifications. See Troubleshooting, page 22.
• Never wash down the product with water! There is the risk of electric shock!
• Never use the product when your judgment or coordination is impaired by the use of alcohol and/or drugs.

• Product must be disconnected from the mains during installation, maintenance, cleaning and repair procedures.

• Be careful when using alcoholic drinks in your dishes. Alcohol evaporates at high temperatures and may cause fire since it can ignite when it comes into contact with hot surfaces.

• Do not heat closed tins and glass jars in the oven. The pressure that would build-up in the tin/jar may cause it to burst.
• Do not place any flammable materials close to the product as the sides may become hot during use.
• Keep all ventilation slots clear of obstructions.
• Make sure that the product function knobs are switched off after every use.
• Vapour pressure that build up due to the moisture on the hob surface or at the bottom of the pot can cause the pot to move. Therefore, make sure that the oven surface and bottom of the pots are always dry.

Intended use

This product is designed for domestic use.

Commercial use will void the guarantee.

"CAUTION: This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating."

The manufacturer shall not be liable for any damage caused by improper use or handling errors.

Service life of your product is 10 years.

Manufacturer shall provide the required spare parts for the product to perform as defined during this period.

Safety for children

• Packaging materials are dangerous to children. Keep packaging materials in a safe place out of reach of children.
• Electrical and/or gas products are dangerous to children. Keep children away from the product when it is operating and do not allow them to play with the product.

• Accessible parts of the appliance will become hot whilst the appliance is in use. Children should be kept away until the product has cooled down.

• Do not place any items above the appliance that children may reach for.

• The packaging materials will be dangerous for children. Keep the packaging materials away from children. Please dispose of all parts of the packaging according to environmental standards.

SAVE THESE INSTRUCTIONS

Safety when working with electricity

Defective electric equipment is one of the major causes of house fires.

• Any work on electrical equipment and systems should only be carried out by authorized and qualified persons.
• In case of any damage, switch off the product and disconnect it from the mains. To do this, turn off the fuse at home.
• Make sure that fuse rating is compatible with the product.

3 Installation

Refer to the nearest Authorised Service Agent for installation of the product. Make sure that the electric and gas installations are in place before calling the Authorised Service Agent to have the product ready for operation. If not, call a qualified electrician and fitter to have the required arrangements made. The manufacturer shall not be held responsible for damages arising from procedures carried out by unauthorized persons which may also void the warranty.

Preparation of location and electrical and gas installation for the product is under customer's responsibility.

DANGER

The product must be installed in accordance with all local gas and/or electrical regulations.

DANGER

Prior to installation, visually check if the product has any defects on it. If so, do not have it installed.

Damaged products cause risks for your safety.

Before installation

The hob is designed for installation in a commercial worktop. A safety distance must be left between the appliance and the kitchen walls and furniture. See figure (values in mm).

• Remove packaging materials and transport locks.
• Surfaces, synthetic laminates and adhesives used must be heat resistant (100 °C minimum).
• The worktop must be aligned and fixed horizontally.
• Cut aperture for the hob in worktop as per installation dimensions.

50* 560 490 50* 50*

* min.

Installation and connection

- The product must be installed in accordance with all local gas and electrical regulations.

Do not install the hob on places with sharp edges or corners.

There is the risk of breaking for glass ceramic surface!

Electrical connection

Connect the product to a grounded outlet/line protected by a fuse of suitable capacity as stated in the "Technical specifications" table. Have the grounding installation made by a qualified electrician while using the product with or without a transformer. Our company shall not be liable for any damages that will arise due to using the product without a grounding installation in accordance with the local regulations.

DANGER

The product must be connected to the mains supply only by an authorised and qualified person. The product's warranty period starts only after correct installation.

Manufacturer shall not be held responsible for damages arising from procedures carried out by unauthorised persons.

DANGER

The power cable must not be clamped, bent or trapped or come into contact with hot parts of the product.

A damaged power cable must be replaced by an Authorised Service Agent. Otherwise, there is risk of electric shock, short circuit or fire!

• Connection must comply with national regulations.
• The mains supply data must correspond to the data specified on the type label of the product. Type label is at the rear housing of the product.
• Power cable of your product must comply with the values in "Technical specifications" table.

DANGER

Before starting any work on the electrical installation, disconnect the product from the mains supply. There is the risk of electric shock!

Connecting the power cable

1. If it is not possible to disconnect all poles in the supply power, a disconnection unit with at least 3 mm contact clearance (fuses, line safety switches, contactors) must be connected and all the poles of this disconnection unit must be adjacent to (not above) the product in accordance with IEE directives. Failure to obey this instruction may cause operational problems and invalidate the product warranty.

Additional protection by a residual current circuit breaker is recommended.

If a cable is supplied with the product product:

L2 3 L1 2 1 SUPPLY COLO LI BLACK LI GREEN NEUTRAL BLUE EAR TH YEL-GNN 4 N E L1 3 L2 3 1 SUPPLY COLO LI BLACK/SMY NEUTRAL BLUE EAR TH YEL-GNN 4 N E L1 3 L2 3 1 SUPPLY COLO L1 3 L2 3 1 Copper bridge 4 N E L1 3 L2 3 1 SUPPLY COLO L1 3 L2 3 1 Copper bridge 4 N E L1 3 L2 3 1 SUPPLY COLO L1 3 L2 3 1 SUPPLY COLO L1 3 L2 3 1 SUPPLY COLO L1 3 L2 3 1 SUPPLY COLO NEUTRAL BLUE EAR TH YEL-GNN 4 N E

1. For single-F-phase connection, phase connection, wires as identified below:

2. Brown cable = L (Phase)

3. Blue cable = N (Neutral)

4. Green/yellow cable = (E) (Ground)

5. For double F-phrase connection, phase connection, wires as identified below:

6. Brown cable = L1 (Phase 1)

7. Black cable = L2 (Phase 2)
8. Blue cable = N (Neutral)
9. Green/yellow cable = (E) ≡ (Ground)

Installing the product

1. The sealing gasket provided in the package must be applied on the lower casing bend around the hob as shown in the figure, during installation of the hob.

Two-panel image showing a hand pressing down on a black electronic device and a close-up of the internal components (no visible text or symbols)

1. Place the hob on the counter and align it.
2. Using the installation clamps secure the hob by fitting through the holes on the lower casing.

5 * # 1 2 3 4 6

* min. 20 & max. 40 mm

min. 50 mm

1 Hob
2 Screw
3 Installation clamp
4 Counter
5 Sealing gasket
6 Separator plate

Rear view (connection holes) Rear view (connection ho

Metallic rectangular panel with mounting holes and a central hole, no visible text or symbols

Making connections to different holes is not a good practice in terms of safety since it can damage the gas and electrical system.

Final check

1. Plug in the power cable and switch on the product's fuse.

2. Check the functions.

Disposal

Package information

- Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

Future Transportation

- Keep the product's original carton and transport the product in it. Follow the instructions on the carton. If you do not have the original carton, pack the product in bubble wrap or thick cardboard and tape it securely.

Check the general appearance of your product for any damages that might have occurred during transportation.

Disposing of the old product

Dispose of the old product in an environmentally friendly manner.

This equipment bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this equipment must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact local or regional authorities.

Refer to your local dealer or solid waste collection centre in your area to learn how to dispose of your product.

Before disposing of the product, cut off the power cable plug and make the door lock (if any) unusable to avoid dangerous conditions to children.

4 Preparation

Tips for saving energy

The following information will help you to use your appliance in an ecological way, and to save energy:

• Defrost frozen dishes before cooking them.
• Use pots/pans with cover for cooking. If there is no cover, energy consumption may increase 4 times.
• Select the burner which is suitable for the bottom size of the pot to be used. Always select the correct pot size for your dishes. Larger pots require more energy.
• Pay attention to use flat bottom pots when cooking with electric hobs. Pots with thick bottom will provide a better heat conduction. You can obtain energy savings up to 1/3.
• Vessels and pots must be compatible with the cooking zones. Bottom of the vessels or pots must not be smaller than the hotplate.
• Keep the cooking zones and bottom of the pots clean. Dirt will decrease the heat

conduction between the cooking zone and bottom of the pot.

- For long cookings, turn off the cooking zone 5 or 10 minutes before the end of cooking time. You can obtain energy savings up to 20% by using the residual heat.

Initial use

First cleaning of the appliance

The surface might get damaged by some detergents or cleaning materials. Do not use aggressive detergents, cleaning powders/creams or any sharp objects during cleaning.

1. Remove all packaging materials.
2. Wipe the surfaces of the appliance with a damp cloth or sponge and dry with a cloth.

Initial heating

Smoke and smell may emit for a couple of hours during the initial operation. This is quite normal. Ensure that the room is well ventilated to remove the smoke and smell. Avoid directly inhaling the smoke and the smell that emits.

5 How to use the hob

General information about cooking

DANGER

Never fill the pan with oil more than one third of it. Do not leave the hob unattended when heating oil. Overheated oils bring risk of fire.

Never attempt to extinguish a possible Never fire with water if when oil catches fire, cover it with a fire blanket or damp cloth. Turn off the hob if it is safe to do so and call the fire department.

• Before frying foods, always dry them well and gently place into the hot oil. Ensure complete thawing of frozen foods before frying.
• Do not cover the vessel you use when heating oil.
• Place the pans and saucepans in a manner so that their handles are not over the hob to prevent heating of the handles. Do not place unbalanced and easily tilting vessels on the hob.
• Do not place empty vessels and saucepans on cooking zones that are switched on. They might get damaged.
• Operating a cooking zone without a vessel or saucepan on it will cause damage to the product. Turn off the cooking zones after the cooking is complete.
• As the surface of the product can be hot, do not put plastic and aluminum vessels on it. Clean any melted such materials on the surface immediately.
  Such vessels should not be used to keep foods either.
• Use flat bottomed saucepans or vessels only.
• Put appropriate amount of food in saucepans and pans. Thus, you will not have to make any unnecessary cleaning by preventing the dishes from overflowing. Do not put covers of saucepans or pans on cooking zones.
  Place the saucepans in a manner so that they are centered on the cooking zone. When you want to move the saucepan onto

another cooking zone, lift and place it onto the cooking zone you want instead of sliding it.

Tips about glass ceramic hobs

• Glass ceramic surface is heatproof and is not affected by big temperature differences.
• Do not use the glass ceramic surface as a apt to extinguish a possible place of storage or as a cutting board.
• Use only the saucepans and pans with machined bottoms. Sharp edges create scratches on the surface.
• Do not use aluminum vessels and saucepans. Aluminum damages the glass ceramic surface.

Diagram showing a hand holding a surface crossed with a diagonal line, next to a building (no text or symbols)

Spills may damage the glass ceramic surface and cause fire.

Do not use vessels with concave or convex bottoms.

Use only the saucepans and pans with flat bottoms. They ensure easier heat transfer. If the diameter of the saucepan is too small, energy will be wasted.

Using the hobs

Diagram of a layered structure with four circular holes and labeled points 1, 2, 3, 4 (no text or symbols beyond labels)

1 Single-circuit cooking plate 14-16 cm
2 Dual-circuit cooking plate 12-14/21-23 cm
3 Single-circuit cooking plate 16-18 cm
4 Extended cooking plate 14-16/25-27 cm is list of advised diameter of pots to be used on related burners.

DANGER

Do not allow any object to drop on the hob. Even small objects such as a saltshaker may damage the hob.

Do not use cracked hobs. Water may leak through these cracks and cause short circuit.

In case of any kind of damage on the surface (eg., visible cracks), switch off the product immediately to minimize the risk of electric shock.

Quick heating glass-ceramic hobs emit a bright light when they are switched on. Do not stare at the bright light.

Control panel

Camera control panel interface with icons for settings, display, and function buttons

SpecificationsSpecifications

Abstract pattern of vertical black and gray bars on white background (no text or symbols)

Adjustment area (for temperature level and time setting)

	Light indicating that the relevant key is functioning
	On / Off key
	Keylock key
	Multi-segmented Cooking ZoneSelection key
	Timer Activation / Deactivation key
	Quick Heating key / Booster key
	Keep Warm key
	Stop key
	Memory key
	Front Left Cooking Zone Selection key
	Rear Left Cooking Zone Selection key
	Rear Right Cooking Zone Selection key
	Front Right Cooking Zone Selection key

Graphics and figures are for informational purposes only. Actual displays and functions may vary according to the model of your hob.

Cooking zone display Cooking zone display

1 2 旧 6 5 4 3

1 Temperature Indicator (temperature setting 0 ... 19)
2 Cooking zone light
3 Cooking Zone Selection key
4 Keep Warm Function symbol (*)
5 Timer symbol
6 Multi-segmented Cooking Zone symbol (*)
* Varies according to the model.

This device is controlled with a touch control panel. Each operation you make on your touch control panel will be confirmed by an audible signal.

Always keep the control panel clean and dry. Having damp and soiled surface may cause problems in the functions.

Turning on the hob

1. Touch " " key on the control panel.

Light of the "① key turns on. The hob is ready for use.

If no operation is performed within 10 seconds, the hob will automatically return to Standby mode.

When any key ("key") is pressed for a long time, the product automatically turns off for safety reasons.

Turning off the hob

1. Touch " " key on the control panel.

The hob will turn off and return to Standby mode.

"H" or "h" and then "-" symbols that appear on the cooking zone display after the hob is turned off indicates that the cooking zone is still hot. Do not touch cooking zones.

Residual heat indicator

"H" and then """symbols that appear on the cooking zone display indicates that the hob is still hot and may be used to keep a small amount of food warm. This symbol will soon turn to "h" and """symbol meaning less hot.

When power is cut off, residual heat indicator will not light up and does not warn the user against hot cooking zones.

If power fails and restores before the cooking zones cool down, "-"appears on the relevant cooking zone display. This symbol will disappear if the relevant cooking zone is operated.

Turning on the cooking zones

Diagram showing three labeled icons (1, 2, 3) with arrows pointing to a bar and a timer-like symbol, likely representing UI control or status indicators.

1. Touch " "key to turn on the hob.
2. Touch the selection key of the cooking zone you want to turn on.

"0" appears on the cooking zone display and the light of the relevant cooking zone illuminates.

If no operation is performed within 20 seconds, the hob will automatically return to Standby mode.

Setting the temperature level

By touching the adjustment area or by sliding your finger across the area, adjust the temperature level between "0" and "19".

Turning off the cooking zones:

A cooking zone can be turned off in 3 different ways:

1. By dropping the temperature level to "0" By dropping You can turn the cooking zone off by dropping the temperature level to "0".
2. By using the turning off through the by using the turn timer option for the desired cooking zonetimer option

When the time is over, the timer will turn off the cooking zone assigned to it. "0" or "00" will appear on all displays. The "💡 symbol on the hob display will disappear. When the time is over, an audible alarm will sound. Touch any key on the control panel to silence the audible alarm.

1. By touching the relevant cooking zone By touching symbol for 3 seconds. symbol for 3 seconds. Touch the symbol of the cooking zone that you want to turn off for about 3 seconds.

High Power (Booster) Function

For rapid heating, you can use booster function. However, this function is not recommended for cooking a long time. Booster function may not be available in all cooking zones.

Selecting Booster directly:

1. Touch " "key to turn on the hob.
2. Select the desired cooking zone by touching the Cooking Zone Selection keys.
3. Touch the "key."

Selected cooking zone will operate at the maximum power and 3 lights will flash on the cooking zone display respectively. When booster time ends, cooking zone turns off.

Selecting Booster when cooking zone is active:

1. Touch "after cooking zone has operated at least 20 seconds on a certain level.

Cooking zone should complete operating for at least 20 seconds on the selected level.

1. Selected cooking zone will operate at the maximum power and 3 lights will flash on the cooking zone display respectively. Once the Booster period is over, the cooking zone switches to the set temperature level and only the selected temperature value is displayed.

Turning off Booster function prematurely:

Touch "###" to turn off booster any time you want.

Quick heating

Qucik heating is a function which facilitates cooking. All cooking zones are equipped with

Quick heating function. This function can be operated by setting temperature level beforehand.

Quick heating function can be set within 20 seconds after cooking zone is switched on.

Selecting Quick heating function:

ng the relevant cooking zone 1 2 3 4

1. Touch " " key to turn on the hob.
2. Select the desired cooking zone by touching the Cooking Zone Selection keys.
3. Adjust the desired temperature level by touching the adjustment area or by sliding your finger across the area.
4. Touch the " " key.
   The cooking zone you have selected will operate at maximum power for a certain period of time. 3 lights and the set temperature value will appear on the cooking zone display respectively.
5. Once the Quick heating period is over, the cooking zone switches to the set temperature level and only the selected temperature value is displayed.

Table: Calendar Heating Operation Times

Temperature levelT	Operation time limit 0-hourhour
0	0
1	10
2	10
3	20
4	30
5	40
6	47
7	56
8	65
9	75
10	85
11	85
12	25
13	25
14	35
15	35
16	45
Temperature level	Operation time limit 0-hourhour
17	45
18	10
19	10

Turning off Quick heating function:

Touch "key to turn off the Quick heating function whenever you want.

If the Quick heating function has been activated by selecting the temperature level, the cooking zone will continue operating at

the set temperature level when "pressed.

Turning on multi-segmented cooking zones

Camera control panel interface with labeled buttons and status indicators

1. Touch " "key to turn on the hob.
2. Select the multi-segmented cooking zone by touching the Cooking Zone Selection keys.
3. Adjust the desired temperature level by touching the adjustment area or by sliding your finger across the area.
4. Touch "Key" on the control panel to turn on the multi-segment of the cooking zone.
   " symbol appears on the display of the relevant cooking zone.

The multi-segment will be activated only if a temperature level between "1" and "19" is set for the main segment of the cooking zone.

Turning off multi-segment cooking zones

1. Touch "Key on the control panel to turn off the multi-segment of the cooking zone." Symbol on the display of relevant cooking zone disappears and multi-segment of the cooking zone turns off. The main segment of the relevant cooking zone goes on operating at the set temperature.

Cleaning lock

The cleaning lock prevents operation of all keys on the control panel for 20 seconds to allow the

user to make a short cleaning while the hob is in use.

Activating the cleaning lock

20 ① 1 8 3 100

1. When the hob is in On mode, press and hold "key until a single signal sound single signal cleaning lock light will illuminate and the clock display of the hob will start to count down from 20. None of the keys on the control panel will be functional throughout this period except "key.

Deactivating the cleaning lock

You do not have to press any key to deactivate the cleaning lock. The hob will give an audio signal after 20 seconds, keylock light will turn off and the cleaning lock is automatically deactivated.

If you want to deactivate the cleaning lock earlier, press and hold the "key until two intermittent signal sounds are the signal s

Child Lock

When the hob is in Standby mode, you can protect the hob with child lock to prevent children from turning on the cooking zones. Child Lock can be activated or deactivated in Standby mode only.

Activating the Child Lock

1. When the hob is in Standby model, press and hold "key until two signal markers are heard. The Child Lock will be activated and the light of the "key will turn off.

If any key is pressed when the Child Lock is active, the light of the "☐" key flashes.

Deactivating the Child Lock

1. When the Child Lock is activated, press and hold "key until a single signal is heard."

» Child Lock will be deactivated and the light of the "key will turn off.

Keylock

You can activate the keylock to avoid changing the functions by mistake when the hob is operating.

Activating the keylock

1. Touch and hold the "key for a long time to lock the control panel.

Only one signal sound will be heard first. In this case, your hob is switched to Cleaning LockCleaning Lockacross the area.

Then, keep on touching without lifting your Then, keep an otaching without lifting period of time, the " finger until you hear two successive signal finger until your heart lights successively. Lighting up of sounds.sounds. " symbol continuously indicates that the

The light of the "key will flash and all cooking zones will be locked.

You can activate the keylock in operation mode only. When keylock is activated, only the "①key will be functional. When you

touch any other key, the light of the " 🔍 key will flash to indicate that the keylock is active.

If you turn the hob off when the keys are locked, the keylock must be deactivated to turn the hob on again.

Deactivating the keylock

1. Keep "key pressed for 2 seconds.

The operation is confirmed with an audible signal.

The light of the "key turns off and the control panel is unlocked.

Economic timer function

This function facilitates cooking for you. It will not be necessary to attend the oven for the whole cooking period. Cooking zone will be turned off automatically at the end of the time you have selected.

While cooking with this function, your hob will adjust the power automatically towards the end of cooking and allow power savings by using the residual heat.

Activating the timer

1. Touch "①" key to turn on the hob.

2. Select the desired cooking zone by touching the Cooking Zone Selection keys.

3. Adjust the desired temperature level by touching the adjustment area or by sliding your finger across the area.
4. Touch "eco" key to activate the timer.

"00" appears on the timer display and "④ symbol starts flashing on the cooking zone display.

1. Adjust the desired time period by touching the adjustment area or by sliding your finger

Lockacross the area.

Ate flashing without lifting your end of time, the "√" your head lights up to a sign. Lighting up of "√" symbol continuously indicates that the function is activated.

The timer cay only be set for the cooking zones already in use.

Repeat the above procedures for the other cooking zones for which you wish to set the timer.

Timer cannot be adjusted unless the cooking zone and the temperature value for the cooking zone are selected.

When the timer is activated, only the set time for the selected cooking zone will appear on the timer display.

Deactivating the timer

Once the set time is over, the hob will automatically turn off and give an audible warning.

Press any key to silence the audio warning.

Turning off the timers earlier

If you turn off the timer earlier, the hob will carry on operating at the set temperature until it is turned off.

You can turn the timer off in two different ways:

1-Turning off the timer by dropping its value Turning off tl down todo'00'to

1. Select the cooking zone you want to turn off.
2. Touch "key to select the timer of the relevant cooking zone.
3. Decrease the value until "000" appears on the timer display by touching the adjustment area or by sliding your finger across the area.
   "symbol flashes on the cooking zone display for a certain time period and then it turns off permanently perthetitiver is canceled.

2-Turning off the timer by pressing timer key Turning for 3 seconds: 3 seconds:

1. Select the cooking zone you want to turn off.

2. Touch "key to select the timer of the relevant cooking zone.

3. Touch " key for about 3 seconds.

" symbol flashes on the cooking zone display for a certain time period and then it turns off permanently perthetitiver is canceled.

Keep warm function (if any)

You can use this function to keep your meal warm after the cooking process is completed. The keep warm function may be used in two different ways: with and without setting the timer.

Activating the keep warm function without Activating the k setting the timersetting the timer

1. Select the cooking zone that has been set to a certain temperature and you want to use for keeping warm.

2. Touch "key to activate the keep warm function for the relevant cooking zone.

The cooking zone will go on operating at low temperature.

and "u" symbols appear on the cooking zone display.

ActiAtatingthe lkeekeparwafomctioctionsettsegting the timmer

Diagram showing various icons and labels including a minus, lock, lamp, battery, switch, and bar with numerical indicators.

1. Select the desired cooking zone for which the temperature and timer has been set, and you are planning to run the keep warm function.

2. Touch "key to activate the keep warm function for the relevant cooking zone.

3. Select the desired cooking zone for which the temperature and timer has been set, and you are planning to run the keep warm function.

4. Touch "key" to activate the keep warm function for the relevant cooking zone.

"18" symbol appears on the cooking zone display.

The cooking zone will keep on operating at the set temperature throughout the set time period. When the time is over, it switches to keep warm function and starts operating at low temperature. "u" symbol appears on the cooking zone display.

Turning off the keep warm function

1. If the timer is activated, select the cooking off the timer for which this is a key function is activated.

Touch "" "key to turn off the keep warm function.

The cooking zone will continue operating with the previous time and temperature setting.

1. If the timer is deactivated, select the cooking zone for which the keep warm function is activated. Set the desired temperature by touching the adjustment area or by sliding your finger across it in order to deactivate the keep warm function.

The cooking zone will go on operating at the new temperature you have set.

You can cancel the keep warm function in function without by touching the ⚙️ key and turning off the hob entirely.

Stop function

Using this function, you may stop all functions operating on the hob(except time) for a certain period of time.

If the timer is set for any cooking zone, timer will continue operating during stoppage.

User interface toolbar with icons for email, phone, and address bar functions

1. Touch the "▶key when your hob is operating.

All active cooking zones will stop.

1. Touch "▶III" key again to restart all stopped cooking zones with previous settings.

Memory function

Your hob can save a certain cooking temperature and time in the memory. Thanks to this function,

you can store the cooking temperature and time of a dish you enjoyed.

Only 1 setting can be stored in the memory. As each saved setting will be overwritten on the previous one, the last setting you have saved will remain in the memory.

1. Touch " "key to turn on the hob.
2. Select the desired cooking zone by touching the Cooking Zone Selection keys.
3. Adjust the desired temperature by touching the adjustment area or by sliding your finger across the area.
4. Adjust the desired time as well.
5. After adjusting the temperature and time, touch the "☐" symbol until you hear two two warning sounds warning sounds

The "☐" symbol will light up and the set temperature and time are saved into memory. Using the settings in the memoryUsing the settings in

1. Select the desired cooking zone by touching the Cooking Zone Selection keys.
2. When the temperature value is "0", touch "key until you hear a single waving single soundsound

The selected cooking zone will be set to the temperature and time in the memory, and commence operating with these settings.

Operation time constraints

The hob control is equipped with an operation time limit. When one or more cooking zones are left on, the cooking zone will automatically be deactivated after a certain period of time (see Table-1). If there is a timer assigned to the cooking zone, the timer display will also turn off later.

Operation time limit depends on the selected temperature level. Maximum operation time is applied at this temperature level.

The cooking zone may be restarted by the user after it is turned off automatically as described above.

Table 1.0 Operation time constraints

Temperature levelT1	Operation time limit O-hour
0	0
1	6

Temperature levelT	Operation time limit O-hour
2	6
3	5
4	5
5	4
6	4
7	3
8	3
9	2,5
10	2,5
11	2
12	2
13	1,5
14	1,5
15	1
16	1
17	0,5
18	0,5
19the memory Booster	0,510 minutes

Overheating protection

arvinghob is equipped with some sensors ensuring protection against overheating.

Following may be observed in case of overheating:

• Active cooking zone may be turned off.
- Selected level may drop. However, this condition cannot be seen on the indicator.

Error messages

Table2 error codes and error sources

Cause of error	Indicator	Display
Two or more keys are pressed	"E" symbol flashes	Cooking zone display
Hob overheated	"H"symbol flashes	Cooking zone display
PTC short circuit	"F0" symbol lights up	Timer display
PTC open circuit	"F1" symbol lights up	Timer display
Touch-key sensitivity error	"F2" symbol lights up	Timer display
Communication error in touch control	"F3" symbol lights up	Timer display
Cause of errorC	Indicator1	Display1
Inductionhardware error	"EX" symbolflashes	Cooking zonedisplay

For further information about error messages that may appear on the touch control panel, see Table-2.

If the surface of the touch control panel is exposed to intense vapor, entire control system may become deactivated and give error signal.

Keep the surface of the touch control panel clean. Erroneous operation may be observed.

6 Maintenance and care

General information

Service life of the product will extend and the possibility of problems will decrease if the product is cleaned at regular intervals.

DANGER

Disconnect the product from mains supply before starting maintenance and cleaning works. There is the risk of electric shock!

DANGER

Allow the product to cool down before you clean it. Hot surfaces may cause burns!

• Clean the product thoroughly after each use. In this way it will be possible to remove cooking residues more easily, thus avoiding these from burning the next time the appliance is used.
• No special cleaning agents are required for cleaning the product. Use warm water with washing liquid, a soft cloth or sponge to clean the product and wipe it with a dry cloth.
• Always ensure any excess liquid is thoroughly wiped off after cleaning and any spillage is immediately wiped dry.
• Do not use cleaning agents that contain acid or chloride to clean the stainless or inox surfaces and the handle. Use a soft cloth with a liquid detergent (not abrasive) to wipe those parts clean, paying attention to sweep in one direction.

The surface might get damaged by some detergents or cleaning materials. Do not use aggressive detergents, cleaning powders/creams or any sharp objects during cleaning.

Do not use steam cleaners to clean the appliance as this may cause an electric shock.

Cleaning the hob

Glass ceramic surfaces

Wipe the glass ceramic surface using a piece of cloth dampened with cold water in a manner as not to leave any cleaning agent on it. Dry with a soft and dry cloth. Residues may cause damage on the glass ceramic surface when using the hob for the next time.

Dried residues on the glass ceramic surface should under no circumstances be scraped with hook blades, steel wool or similar tools.

Remove calcium stains (yellow stains) by a small amount of lime remover such as vinegar or lemon juice. You can also use suitable commercially available products.

If the surface is heavily soiled, apply the cleaning agent on a sponge and wait until it is absorbed well. Then, clean the surface of the hob with a damp cloth.

Sugar-based foods such as thick cream and syrup must be cleaned promptly without waiting the surface to cool down. Otherwise, glass ceramic surface may be damaged permanently.

Slight color fading may occur on coatings or other surfaces in time. This will not affect operation of the product.

Color fading and stains on the glass ceramic surface is a normal condition, and not a defect.

Scraper for cleaning the glass ceramic Scraper for cleanir surfacesurface

Clean the spilled residues and stuck dirt with a commercially available scraper which is specially designed for glass ceramic surfaces.

To avoid scratches, hold the scraper at a narrow angle.

Illustration of a mobile phone receiver with a hand inserting a slot into the case (no text or symbols present)

7 Troubleshooting

Water drops occur during cooking.
	The vapour that arises during cooking can condense and form water droplets when it hits cold surfaces of the product. This is not a fault.
Product emits metal noises while heating and cooling.
	When the metal parts are heated, they may expand and cause noise. This is not a fault.
Product does not operate.
The mains fuse is defective or has tripped. >>> Check fuses in the fuse box. If necessary, replace or reset them.Product is not plugged into the (grounded) socket. >>> Check the plug connection.If the display does not light up when you switch the hob on again. >>> Disconnect the appliance at the circuit breaker. Wait 20 seconds and then reconnect it.
Cooling fan continues operating although the hob is turned off.
This is not a fault. Cooling fan will continue operating until the electronics in the hob cools down to a suitable temperature.
	Consult the Authorised Service Agent or the dealer where you have purchased the product if you can not remedy the trouble although you have implemented the instructions in this section. Never attempt to repair a defective product yourself.