NL571AT - Câbles pour ordinateurs et périphériques HP - Free user manual and instructions

Product Type	AC Power Cord
Brand	HP
Model	NL571AT
Length	1.8 meters (6 feet)
Connector Type	IEC C13 to C14
Color	Black
Cable Gauge	18 AWG
Rated Voltage	250 V
Rated Current	10 A
Compatibility	HP monitors, desktops, and other devices with C14 inlet
Material	PVC jacket, copper conductors
Weight	Approximately 0.2 kg
Operating Temperature	-20°C to 60°C
Safety Certifications	UL, CSA, CE
Storage Temperature	-40°C to 80°C
Maintenance	Wipe with a dry cloth; do not use liquids or abrasives
Safety Precautions	Do not overload the cord; avoid sharp bends; unplug by gripping the connector, not the cable
Spare Parts Availability	Not applicable as a single unit; replace entire cord if damaged
Repairability	Non-repairable; replace if faulty
Country of Origin	China

Frequently Asked Questions - NL571AT HP

What devices is the HP NL571AT power cord compatible with?

The HP NL571AT is an IEC C13 to C14 power cord, compatible with HP monitors, desktop PCs, and other equipment that uses a standard C14 inlet. Always check your device's power requirements before use.

What is the length of the NL571AT cable?

The HP NL571AT power cord is approximately 1.8 meters (6 feet) long, suitable for most desktop setups.

Can I use this cable with a printer or other peripherals?

Yes, as long as the device has a C14 power inlet and does not exceed the cable's rating of 10A/250V. Verify your device's power specifications first.

Is the NL571AT shielded?

This is a standard power cord, not a signal cable, so it does not require shielding. It is designed for AC power transmission only.

How should I clean the power cord?

Unplug the cord and wipe it with a dry, soft cloth. Do not use water, cleaning solvents, or abrasive materials, as they may damage the insulation.

What should I do if the cable gets damaged?

Do not attempt to repair a damaged power cord. Replace it immediately with a new HP NL571AT or equivalent cord to avoid risk of electric shock or fire.

Can I use this cable outdoors?

This cord is designed for indoor use only. Outdoor use can expose it to moisture and temperature extremes, which may cause damage or safety hazards.

Is the NL571AT compatible with 110V and 220V systems?

Yes, the cable is rated for 250V and 10A, so it can be used with both 110V and 220V outlets as long as the current does not exceed 10A. Always use the appropriate adapter for the plug type.

What is the weight of the HP NL571AT?

The cable weighs approximately 0.2 kg (0.44 lbs), making it lightweight and easy to manage.

How should I store the power cord when not in use?

Coil the cord loosely without sharp bends and store it in a dry, cool place away from direct sunlight and heat sources. This prevents damage to the insulation.

USER MANUAL NL571AT HP

1. (not shown). USB connector: For connecting to a display source via a USB cable.

2. DVI-I connector. Allows digital or analog output to the display.

Model

NL571AA

Introduction

HP offers a variety of optional products (each sold separately) designed to complement our monitors and enhance the overall computing experience. The super-compact HP USB Graphics Adapter enables connection of up to six simultaneous displays to help you boost productivity and multi-task across several open applications.

Overview

Compatibility & Exceptions

See minimum system requirements below.

- Compatible with the HP ElitePad with the Z2760 Atom processor and the ElitePad Expansion Jacket, Productivity Jacket and Docking Station.

NOTE: Please note the exceptions below.

• SIS graphics cards are not supported
• Matrox graphics cards are not supported
• NVidia SLI graphics cards in SLI mode are not supported
• ATI Crossfire graphics cards are not supported
• SLI graphics cards not in SLI mode are not supported
- Cannot support Multiple WDDM graphics drivers that are active at the same time
- Hosts with Intel 3600 or 4600 graphics engines are not supported
- The solution may not work if there are multiple graphics cards installed on the host PC.

A variety of uses

Build a wall of tiled displays or use several monitors with a notebook or desktop PC on the desk. The HP USB Graphics Adapter can help boost productivity and flexibility in a variety of settings:

• Office: View large spreadsheets across two screens or multitask without overlapping windows
- On the road: Enable multiple screen presentations from one PC
- Graphics houses: Use a second display for palettes or tools or a panoramic view of large documents
- Editing: Edit documents on one screen and reference data on another; compare multiple documents simultaneously
• Financial: Use one monitor for each data stream

Technical Specifications

Host Interface	USB 2.0
Video interface	VGA or DVI-I
Connectors	Video output: VGA HDDE 15pin Female Connector or DVI-I 24pin + 5pin Female Connector Host upstream link: USB Mini-B Type Female Connector
Connectivity	Up to 6 adapters on a computer
Power Mode	Bus-powered
Supported Modes	Extend (Default), Mirror, Primary Display
Supported resolutions	Up to 1920 x 1080 (widescreen) or 1600 x 1200 (traditional)
USB Cable	USB A -Type Male to 5pin Mini USB B-Type Male, 3.28 ft (1 m)
Operating Temperature	10-40°C (50-104°F)
Storage Temperature	-10~80°C (14~176°F)
Relative Humidity	< 85% non-condensing
System Requirements	Software	Windows 8 Pro (32-bit and 64-bit), Windows 8 (32-bit and 64-bit), Microsoft® Windows® 7 with Service Pack 1 (32-bit or 64-bit), Windows Vista® with Service Pack 1 (32-bit or 64-bit), Microsoft® Windows® XP Home or Professional with Service Pack 3
	Hardware	The driver will run on a variety of processors ranging from basic single Core CPUs to the latest Dual, Quad Core and Core i3/i5/i7 CPUs.1.2 GHz or higher processor clock speed, with an Intel® CoreTM 2 Duo or equivalent power CPU512 MB RAM for a single attached monitor, 1 GB for two attached monitors, and more for additional attached monitorsAt least one USB 2.0 port30 MB of available disk spaceSuper VGA (800 x 600) or higher-resolution video adapter and monitorCD-ROM or DVD drive if installing from a CD or network access if installing from a networkFor Windows Vista, the Windows Experience Index must be greater than 3.0.
		NOTE:The Windows Experience Index is found under Computer->Properties. Click on Windows Experience Index to see the Graphics Sub Index Score.
Mechanical	Dimensions (H x W x L)	Unpackaged:0.71 x 2.13 x 3.1 in (1.8 x 5.4 x 8.4 cm)
Environmental	EMC	FCC Part 15 Class B, IC ICES-003CE (EN55022, EN61000, EN55024)
	RoHS	RoHS Compliant
Components	HP USB Graphics Adapter, USB Cable, DVI to VGA Adapter, Driver and Documentation CD, Quick Installation Guide
Limited warranty	The HP USB Graphics Adapter has a one-year limited warranty when purchase separately as an AMO. Technical support is available seven days a week, 24 hours a day, by phone, as well as online support forums. Certain restrictions and exclusions apply.

Technical Specifications

© 2014 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Microsoft, Windows, Windows 7, and Windows Vista are registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Intel and Core are trademarks of Intel Corporation in the U.S. and other countries.