BHDBT-K-SPI - Accessoire AV Tripp Lite - Free user manual and instructions
Find the device manual for free BHDBT-K-SPI Tripp Lite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | HDBaseT HDMI Extender Kit |
| Model | BHDBT-K-SPI |
| Brand | Tripp Lite |
| Compatible Devices | HDMI source and display up to 4K @ 60Hz |
| Maximum Transmission Distance | 100 meters (328 feet) over CAT6 cable |
| HDMI Support | HDMI 2.0, HDCP 2.2, 4K @ 60Hz, 3D, Deep Color |
| Ethernet Pass-through | 100Base-TX (through RJ45) |
| IR Control | Bi-directional IR pass-through (3.5mm jacks) |
| Power Over Cable (PoC) | Yes, power supplied by transmitter or receiver |
| Power Input | 5V DC, 2A (power supply included) |
| Dimensions (Transmitter) | 4.3 x 2.8 x 1.0 inches (109 x 71 x 25 mm) |
| Dimensions (Receiver) | 4.3 x 2.8 x 1.0 inches (109 x 71 x 25 mm) |
| Weight (per unit) | 0.5 lbs (227 g) |
| Chassis Material | Metal with ventilation slots |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| LED Indicators | Power, Link, HDCP, and Signal status |
| Mounting Options | Desk or wall-mountable (brackets included) |
| Maintenance | Keep clean with dry cloth; avoid moisture |
| Safety Certifications | CE, FCC, RoHS |
| Warranty | Lifetime (limited) |
Frequently Asked Questions - BHDBT-K-SPI Tripp Lite
What is the maximum transmission distance of the BHDBT-K-SPI?
The BHDBT-K-SPI can transmit HDMI signals up to 100 meters (328 feet) over a single CAT6a cable.
Does this extender support 4K resolution?
Yes, it supports 4K @ 60Hz with HDMI 2.0 and HDCP 2.2, as well as 3D and Deep Color.
Is power over cable (PoC) supported?
Yes, the BHDBT-K-SPI supports Power Over Cable (PoC), meaning power can be supplied by either the transmitter or receiver via a single power supply.
What type of cable is required?
You need a CAT6 or CAT6a solid or stranded UTP/STP cable with RJ45 connectors for the HDBaseT link.
Can I transmit Ethernet and IR signals simultaneously?
Yes, the extender provides 100Base-TX Ethernet pass-through and bi-directional IR pass-through, allowing you to control devices at both ends.
How do I connect IR emitters and receivers?
Use the 3.5mm jacks labeled IR OUT and IR IN. Connect the IR emitter to the source side and IR receiver to the display side, or vice versa.
What are the dimensions and weight of each unit?
Each unit (transmitter/receiver) measures 4.3 x 2.8 x 1.0 inches (109 x 71 x 25 mm) and weighs 0.5 lbs (227 g).
Can I mount the units on a wall?
Yes, the units include mounting brackets for wall or desk mounting. You can also place them on a flat surface.
What do the LED indicators mean?
The LEDs indicate Power (green), Link (green when connected), HDCP (green when HDCP is active), and Signal (green when HDMI signal is present).
How do I clean and maintain the extender?
Use a dry, soft cloth to clean the exterior. Avoid moisture, harsh chemicals, or compressed air. Ensure ventilation slots are unobstructed.
User questions about BHDBT-K-SPI Tripp Lite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Accessoire AV in PDF format for free! Find your manual BHDBT-K-SPI - Tripp Lite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BHDBT-K-SPI by Tripp Lite.