VT-80060 - Lighting V-TAC - Free user manual and instructions

Product Type	LED Waterproof Fitting
Model	VT-80060
Brand	V-TAC
Power Consumption	18W
Luminous Flux	1900 Lumens
Color Rendering Index (CRI)	≥80
Power Factor (DF)	≥0.7
Beam Angle	120°
Lifespan	25,000 hours
On/Off Cycles	>15,000
Input Voltage	AC 220-240V, 50/60Hz
Material	Polycarbonate (PC)
Dimensions (L x W x H)	600 x 59 x 47 mm
Ingress Protection	IP65
Warranty	2 years
Recommended Daily Usage	10-12 hours
Installation	Surface mounted, wired connection
Light Source Replaceable	No (whole unit replacement)
Certifications	RoHS, CE (implied)

Frequently Asked Questions - VT-80060 V-TAC

How do I install the VT-80060 LED fitting?

Turn off power, mark drilling points, fix brackets to ceiling, connect wires to terminal block (Live Brown, Neutral Blue), mount lamp to brackets, close lid, and restore power. Installation must be done by a qualified electrician.

Can this light be used outdoors?

Yes, the VT-80060 has an IP65 rating, making it suitable for outdoor use as it is dust-tight and protected against water jets.

Is the light source replaceable?

No, the light source is not replaceable. When the LED reaches end of life, the entire luminaire must be replaced.

What is the warranty period?

V-TAC offers a 2-year warranty from date of purchase against manufacturing defects, provided the product is used for 10-12 hours daily. 24-hour use voids warranty.

Can I use this light with a dimmer?

No, the VT-80060 is not dimmable. The power factor is ≥0.7, but it is designed for fixed output.

What is the beam angle and how does it affect lighting?

The beam angle is 120°, providing wide coverage suitable for area lighting like corridors, warehouses, or outdoor spaces.

How do I clean this fitting?

Disconnect power and wipe the surface with a soft dry cloth. Do not use abrasive cleaners or water directly on the fixture.

What should I do if the external cable is damaged?

The cable must be replaced exclusively by the manufacturer, its service agent, or a qualified person to avoid electrical hazards.

How many units can be connected in series?

The maximum number of connectable units is not specified for model VT-80060. For safe installation, consult a qualified electrician respecting local regulations.

Does the light come with a plug?

No, the fitting is designed for hardwiring. It requires connection to a terminal block inside the junction box; a plug is not included.

USER MANUAL VT-80060 V-TAC

Meaningful Innovation.

WEEE Number: 80133970

INSTRUCTION MANUAL

LED WATERPROOF FITTING

Exterior view of a cylindrical mechanical component with flanged ends and a central hub (no text or symbols visible)

IP65 RATING 02 YEAR WARRANTY*

TECHNICAL DATA

MODEL SKU WATTS	LUMENS	CRI DF			BEAM ANGLE	LIFE SPAN [Hours]	ON/OFF CYCLE	INPUT POWER	MATERIAL DIMENSION	MAX CONNECTABLE UNITS
VT-80060	2308723088	18W	1900Lm	≥80	≥0.7	120°	25,000	>15,000	AC:220-240V 50/60 Hz	PC 600x59x47mm
VT-80120	2308323084	36W	3900Lm	≥80	≥0.9	120°	25,000	>15,000	AC:220-240V 50/60 Hz	PC 1200x59x47mm
VT-80150	2308523086	48W	5200Lm	≥80	≥0.9	120°	25,000	>15,000	AC:220-240V 50/60 Hz	PC 1500x59x47mm

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

WARNING

1. Please make sure to turn off the power before starting the installation.
2. Installation must be performed by a qualified electrician.
3. The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
4. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.

MULTI-LANGUAGE MANUAL QR CODE

Please scan the QR code to access the manual in multiple languages.

This marking indicates that this product should not be disposed of with other household wastes.

Caution, risk of electric shock.

INSTALLATION INSTRUCTION

Technical line drawing of a mechanical assembly with pipes and a hook, no text or symbols present

RoHS

Diagram of a ceiling-mounted lamp with a pointed beam and cable, shown against a plain background (no text or symbols)

1. Turn off the the power.
2. Mark the proper drilling point as per the chart.
3. Fix the brackets onto the ceiling by offered screws. Open junction box cover of the body with screwdriver.
4. Make sure the cable length is appropriate.
5. Install the lamp to the ceiling clips.
6. Open the right side lid to connect wires.
7. Insert cable through the waterproof connector and wire it into terminal block. Make sure L and N are wired to correct holes. (LIVE = BROWN; NEUTRAL = BLUE)
8. Close the right lid.
9. Turn on the power and test.