Arabesque 41113-92 - Lighting Livex Lighting - Free user manual and instructions

Type	Chandelier
Model	Arabesque 41113-92
Brand	Livex Lighting
Dimensions	Height: 30 inches, Width: 24 inches, Chain Length: 6 feet
Weight	15 lbs
Material	Metal and Glass
Finish	Bronze / Gold Accents
Number of Lights	5
Bulb Type	E12 Candelabra Base (not included)
Wattage	Max 60W per bulb
Voltage	120V AC
Installation Type	Hardwired, Ceiling Mount
Safety Certification	UL Listed for dry locations
Cleaning Instructions	Wipe with a soft, dry cloth. Avoid abrasive cleaners.
Warranty	1-year limited manufacturer warranty
Dimmable	Yes, with compatible dimmer switch
Assembly Required	Yes, instructions included

Frequently Asked Questions - Arabesque 41113-92 Livex Lighting

How do I install the Arabesque 41113-92 chandelier?

Installation should be performed by a qualified electrician. Ensure power is off at the breaker. Connect the fixture wires to the house wiring: black to black (hot), white to white (neutral), and green to ground. Mount the canopy to the ceiling junction box, then attach the chandelier body and chain. Refer to the included instruction manual for details.

What type of bulbs does this chandelier use?

It uses E12 candelabra base bulbs, maximum 60 watts each. LED or incandescent bulbs with the same base are compatible.

Can I use a dimmer switch with this light?

Yes, it is dimmable when used with a compatible dimmer switch. Use dimmable bulbs for best performance.

How do I clean the chandelier?

Wipe the metal and glass parts with a soft, dry cloth. Do not use abrasive cleaners or water directly on the electrical components. For glass shades, gently dust or use a damp cloth followed by drying.

What is the chain length, and can it be adjusted?

The included chain is 6 feet long and can be shortened by removing links with pliers. Hang at your desired height.

Is this chandelier UL listed?

Yes, it is UL listed for dry locations, ensuring safety standards are met.

What is the finish color?

The finish is bronze with gold accents, giving an antique Arabesque style.

Does the fixture come with a warranty?

It comes with a 1-year limited manufacturer warranty against defects. Contact Livex Lighting for claims.

How many lights does this model have?

It has 5 lights arranged in a classic Arabesque design.

Can I install this outdoors?

No, it is rated for dry locations only. Avoid damp or wet environments.

USER MANUAL Arabesque 41113-92 Livex Lighting

ASSEMBLING & INSTALLATION INSTRUCTIONS

The drawing shown may not exactly match the product enclosed. However, the installation instructions do apply to this product.

41107 41108 41109 41111 41112 41113

◆ WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER

♦ ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR.

ASSEMBLING THE FIXTURE (Fig.1)

1. Shut off the power at the circuit breaker box. Remove old fixture and all hardware from Junction Box.
2. Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
3. Thread the two mounting screws about 1/4" into the pre-drilled holes in the mounting plate spaced the same distance apart as the holes in the canopy (I).
4. Attach the mounting plate to the Junction Box with the two Junction Box Screws as shown. The side of the mounting plate marked "GND" must face out. The junction box is not included.
5. Attach the tube(B) to the bottom center pipe nipple of the canopy(I), turn it until tighten. Attach assembly canopy to the top center pipe nipple of the shade (C), by turning it clockwise until tight.
6. Thread the pipe nipple (D) into the bottom center coupling of the lamp holder and lock it securely with the hex nut.
7. Install the light bulbs(Not included) in accordance with the fixture specifications. NOTE: DO NOT EXCEED THE SPECIFIED WATTAGE!
8. Raise the steel shim (E), glass (F) and plastic shim (G) to the bottom of the shade (C), aligning the hole with pipe nipple and screw it with the finial (H).
9. While holding the shade assembly towards the ceiling, connect the electrical wires as Shown in Fig.2, making sure that all wire nuts are secured. You may have to wrap the connections with electrical tape. If your outlet has a ground wire (green or bare copper), connect the fixture ground wire to it. Otherwise connect fixture's ground wire directly to the mounting plate with the green screw provided. After wires are connected, tuck them carefully inside the Junction Box.
10. Raise the shade assembly onto the junction box, aligning screws on mounting plate with mounting holes in canopy (I) and lock it securely with the ball nut (A).

Your installation is now complete. Return power to the junction box and test the fixture.

FIG.1

FIG.2

FIXTURE

WIRES

Black or

Smooth

HOUSE

WIRES

Black(Hot)

FIXTURE

WIRES

White or

Ribbed

HOUSE

WIRES

White

(Neutral)

FIXTURE

WIRES

Bare

Copper

(Ground)

HOUSE

WIRES

Green or Bare

Copper(Ground)

Thank you for purchasing a LIVEX product.

Need assistance with parts or assembly? Please call customer service at: 800-761-8056

Or visit us on-line at: WWW.LIVEXLIGHTING.COM

©COPYRIGHT ALL RIGHTS RESERVED.LIVEX LIGHTING,INC.

DOC20161241107