FSMT52339DXDT - Frying Pan BEKO - Free user manual and instructions

Product Type	Freestanding Gas Cooker with Electric Oven
Brand	Beko
Model	FSMT52339DXDT
Width	90 cm (approximate)
Height	85 cm (approximate)
Depth	60 cm (approximate)
Weight	Approximately 65 kg
Energy Type	Gas (hob) + Electric (oven)
Power Supply	220-240 V, 50/60 Hz
Oven Functions	Conventional, Fan, Grill, Steam
Hob Burners	4 gas burners
Grill Type	Electric grill
Steam Function	Yes (for oven)
Safety Features	Flame failure device, child lock (if applicable), triple glazed door
Door Type	Removable inner glass for cleaning
Cleaning	Hand clean; no self-cleaning (pyrolytic) function mentioned
Oven Capacity	Approximately 65 liters
Energy Efficiency Class	A (estimated)
Control Type	Knobs and digital timer
Gas Types Supported	Natural gas (G20) and LPG (G30/G31) via injector change
Installation Type	Freestanding, requires ventilation
Spare Parts Availability	Injectors, oven lamp, door glass, knobs (via authorized service)
Warranty	Standard manufacturer warranty (2 years typical)

Frequently Asked Questions - FSMT52339DXDT BEKO

How do I clean the hob burners?

After removing the burner caps and heads, wash them with warm soapy water. Dry thoroughly before reassembling. Ensure the flame ports are clear. For stubborn stains, use a non-abrasive cleaner.

Can I use the steam function for all foods?

The steam function is ideal for vegetables, fish, and reheating moist dishes. It is not recommended for foods that require dry heat, such as roasting meat or baking bread.

What should I do if I smell gas?

Do not use any open flames, do not operate electrical switches, and do not use phones. Open windows and doors, turn off the gas supply at the meter, and leave the premises. Call the gas emergency service from outside.

How do I convert the cooker from natural gas to LPG?

This requires replacement of the injectors on the hob burners and possibly adjustment of the oven gas valve. Refer to the injector table in the manual and contact an authorized service agent for proper conversion.

Why is my oven not heating evenly?

Ensure the oven racks are placed correctly and not blocking airflow. Do not cover the oven bottom with foil. Use the fan function for more even heat distribution. If problem persists, check the oven seal and door alignment.

How do I replace the oven lamp?

Disconnect the appliance from the power supply. Unscrew the glass cover, remove the old bulb (usually G9 or E14, 25W), and replace with a new one suitable for high temperatures (300°C). Reattach the cover.

Can I use aluminium foil in the oven?

Aluminium foil can be used to cover dishes, but do not line the oven bottom or walls, as it can cause heat accumulation and damage. Ensure foil does not come into contact with the heating elements.

How do I remove the oven door for cleaning?

Open the door fully, lift the locking levers (if present), and close the door until it stops. Then lift the door upwards and pull it away from the hinges. Be careful as the door is heavy.

What is the recommended energy-saving practice?

Use the correct pan size for the burner, keep lids on, and use residual heat. Preheat the oven only when necessary. Clean the burners regularly for efficient flame.

How often should I clean the oven?

Wipe up spills immediately after each use. Perform a deep clean every few months depending on usage. Steam function can help loosen burnt-on residues.

USER MANUAL FSMT52339DXDT BEKO

Simple line drawing of a steaming cupcake (no text or symbols)

FSMT52339DXDT

EN / PL

485.3024.30/R.AA/18.07.2023

7786982134

Please read this user manual first!

Dear Customer,

Thank you for purchasing this Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology.

Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use. If you handover the product to someone else, give the user manual as well. Follow all warnings and information in the user manual.

Remember that this user manual is also applicable for several other models. Differences between models will be identified in the manual.

Explanation of symbols

Throughout this user manual the following symbols are used:

Important information or useful hints about usage.

Warning of hazardous situations with regard to life and property.

Warning of electric shock.

Warning of risk of fire.

Warning of hot surfaces.

1 Important instructions and warnings for safety and environment 4

General safety 4

Safety when working with gas...... 5

Electrical safety 6

Product safety 7

Intended use....10

Safety for children....11

Disposing of the old product....11

Package information....11

2 General information 12

Overview....12

Package contents....13

Technical specifications 15

Injector table....16

3 Installation 18

Before installation 18

Installation and connection....20

Gas conversion 25

Future Transportation 27

4 Preparation 29

Tips for saving energy 29

Initial use....29

Time setting....29

First cleaning of the appliance....29

Initial heating 30

5 How to use the hob 31

General information about cooking.....31

Using the hobs 31

6 How to operate the oven 33

General information on baking, roasting and grilling....33

How to operate the electric oven....33

Using the steam function....34

Operating modes 35

Using the oven clock....36

Cooking times table....38

How to operate the grill 40

Cooking times table for grilling 41

7 Maintenance and care 42

General information 42

Cleaning the hob 42

Cleaning the control panel 43

Cleaning the oven 43

Cleaning the oven door....44

Removing the door inner glass....45

Replacing the oven lamp....46

8 Troubleshooting 48

1 Important instructions and warnings for safety and environment

This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.

General safety

- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

- The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction. Children should be supervised and ensure they do not play with the appliance

- If the product is handed over to someone else for personal use or second-hand use purposes, the user manual, product labels and other relevant documents and parts should be also given.

- Never place the product on a carpet-covered floor. Otherwise, lack of airflow beneath the product will cause electrical parts to overheat. This will cause problems with your product.

• Installation and repair procedures must always be performed by Authorised Service Agents. The manufacturer shall not be held responsible for damages arising from procedures carried out by unauthorised persons which may also void the warranty. Before installation, read the instructions carefully.

• Do not operate the product if it is defective or has any visible damage.
• Ensure that the product function knobs are switched off after every use.

Safety when working with gas

• Any works on gas equipment and systems may only be carried out by authorised qualified persons who are Gas Safe registered.
• Prior to the installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment of the appliance are compatible.

- This appliance is not connected to a combustion products or evacuation device. It shall be installed and connected in accordance with current installation regulations. Particular attention shall be given to the relevant requirements regarding ventilation; See Before installation, page 18

- CAUTION: The use of gas cooking appliance results in the production of heat and moisture in the room in which it is installed. Ensure that the kitchen is well

ventilated: keep natural ventilation holes open or install a mechanical ventilation device (mechanical extractor hood). Prolonged intensive use of the appliance may call for additional ventilation, for example increasing the level of the mechanical ventilation where present.

- Gas appliances and systems must be regularly checked for proper functioning. Regulator, hose and its clamp must be checked regularly and replaced within the periods recommended by its manufacturer or when necessary.

- Clean the gas burners regularly. The flames should be blue and burn evenly.

- This product should be used in a room which incorporates a properly adjusted and functioning Carbon Monoxide sensor. Make sure the Carbon Monoxide sensor works properly and is maintained frequently. Carbon Monoxide sensor should be installed maximum 2 meters away from the product.

• Good combustion is required in gas appliances. In case of

incomplete combustion, carbon monoxide (CO) might develop. Carbon monoxide is a colourless, odourless and very toxic gas, which has a lethal effect even in very small doses.

• Request information about gas emergency telephone numbers and safety measures in case of gas smell from you local gas provider.
• Conditions and values for gas adjustment of this product are provided on the rating/type label.

What to do when you smell gas

• Do not use open flame or do not smoke. Do not operate any electrical buttons (e.g. lamp button, door bell and etc.) Do not use fixed or mobile phones. Risk of explosion and toxication!
• Open doors and windows.
• Turn off all valves on gas appliances and gas meter at the main control valve, unless it's in a confined space or cellar.

• Check all tubes and connections for tightness. If you still smell gas leave the property.

• Warn the neighbours.

• Call the fire-brigade. Use a telephone outside the house.
• Do not re-enter the property until you are told it is safe to do so.

Electrical safety

• If the product has a failure, it should not be operated unless it is repaired by an Authorised Service Agent. There is the risk of electric shock!
• Only connect the product to a grounded outlet/line with the voltage and protection as specified in the “Technical specifications”. Have the grounding installation made by a qualified electrician while using the product with or without a transformer. Our company shall not be liable for any problems arising due to the product not being earthed in accordance with the local regulations.
• Never wash the product by spreading or pouring water onto it! There is the risk of electric shock!
• Never touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by holding the plug.

• The product must be disconnected during installation, maintenance, cleaning and repairing procedures.

- If the power connection cable for the product is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

- The appliance must be installed so that it can be completely disconnected from the mains supply. The separation must be provided by a switch built into the fixed electrical installation, according to construction regulations.

- Rear surface of the oven gets hot when it is in use. Make sure that the gas/electrical connection does not contact with the rear surface; otherwise, connections can get damaged.

- Do not trap the mains cable between the oven door and frame and do not route it over hot surfaces. Otherwise, cable insulation may melt and cause fire as a result of short circuit.

- Any work on electrical equipment and systems should only be carried out by authorised and qualified persons.

• In case of any damage, switch off the product and disconnect it from the mains. To do this, turn off the fuse at home.

• Make sure that fuse rating is compatible with the product.

Product safety

- WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised.

- Never use the product when your judgment or coordination is impaired by the use of alcohol and/or drugs.

- Be careful when using alcoholic drinks in your dishes. Alcohol evaporates at high temperatures and may cause fire since it can ignite when it comes into contact with hot surfaces.

• Food Poisoning Hazard: Do not let food sit in oven for

more than 1 hour before or after cooking. Doing so can result in food poisoning or sickness.

• Do not place any flammable materials close to the product as the sides may become hot during use.
• During use the appliances becomes hot. Care should be taken to avoid touching heating elements inside the oven.

- Keep all ventilation slots clear of obstructions.

- Do not heat closed tins and glass jars in the oven. The pressure that would build-up in the tin/jar may cause it to burst.

- Do not place baking trays, dishes or aluminium foil directly onto the bottom of the oven. The heat accumulation might damage the bottom of the oven.

- Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass.

- Do not use steam cleaners to clean the appliance as this may cause an electric shock.

• (Varies depending on the product model.)
Placing the wire shelf and tray onto the wire racks properly It is important to place the wire shelf and/or tray onto the rack properly. Slide the wire shelf or tray between 2 rails and make sure that it is balanced before placing food on it (Please see the following figure).