BPS-E693 - Loudspeaker BLAUPUNKT - Free user manual and instructions
Find the device manual for free BPS-E693 BLAUPUNKT in PDF.
| Product Type | Portable Bluetooth Speaker |
| Brand | Blaupunkt |
| Model | BPS-E693 |
| Dimensions (L x W x H) | Approx. 20 x 10 x 10 cm |
| Weight | Approx. 1 kg |
| Power Source | Built-in rechargeable battery via USB-C |
| Battery Life | Up to 8 hours |
| Wireless Connectivity | Bluetooth 5.0 |
| Speaker Power | 10W RMS |
| Frequency Response | 80 Hz - 20 kHz |
| Audio Inputs | 3.5mm AUX, microSD slot, USB port |
| Radio | FM tuner with built-in antenna |
| Hands-free Function | Built-in microphone for calls |
| Water Resistance | IPX4 (splash-proof) |
| Controls | Physical buttons (volume, play/pause, mode) |
| LED Indicator | Power and Bluetooth status |
| Charging Time | Approx. 3 hours |
| Package Contents | 1x Speaker, 1x USB Cable, 1x AUX Cable, 1x User Manual |
| Maintenance | Wipe with a dry cloth; avoid moisture and extreme temperatures |
| Safety Warnings | Do not disassemble; keep away from heat sources; for indoor use only |
| Repairability | Designed for easy access to battery and speaker driver; spare parts available via support |
Frequently Asked Questions - BPS-E693 BLAUPUNKT
User questions about BPS-E693 BLAUPUNKT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Loudspeaker in PDF format for free! Find your manual BPS-E693 - BLAUPUNKT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BPS-E693 by BLAUPUNKT.
USER MANUAL BPS-E693 BLAUPUNKT
BP Americas Corp. 9590 NW 40th St Road Doral, FL 33178
BPS-X6530, BPS-XS650
X-Series
BPS-ES653, BPS-ES650, BPS-ES83, BPS-ES93
E-Series
3 Way Car Speaker System
BLAUPUNT
WIRING / CABLEADO:

Blaupunkt Speaker wired to a single channel Total Impedance: 4 ohms x channel
Blaupunkt Speakers wired in parallel to a single channel Total Impedance: 2 ohms x channel
NOTE: BLAUPUNKT strongly recommends that you operate your system at low volume levels prior the complete installation of your BLAUPUNKT speakers.
CAUTION: Make sure that all of the speaker wiring is fully protected from cuts, tears or possible wear. Any short circuit caused from cuts, tears or wears, could severely damage the source unit or amplifier. Make sure all speaker wires easily reach the speaker terminals with no stress on the wires or connectors.
IMPORTANT: Never cut any metal that is an integral part of the vehicle's safety or structural support system. If you are unsure of the importance of any components of your vehicle, it is recommended that you have your speaker professionally installed.
CHOOSING A LOCATION: It is always best to plan the complete installation prior to attempting to install any product. The routing of wires, power connections, and mounting location, should be planned first. As with any car stereo installation, all work performance should be checked throughly and carefully prior to the operation of the system.
BLAUPUNKT Speakers are designed to fit in almost any factory location. If at all possible, it is recommended that you use factory locations. This apply mostly to later mode cars. For those earlier model cars, that do not have factory location or are limited to just front speaker, it is recommended that you choose a location with a sufficient amount of air space.
If there's not enough air space, the woofer of the speaker may not reproduce low frequencies very well. It is recommended to mount the speakers in the door panels, kick panels, rear deck, etc. Ideally, the speakers should be mounted where it will be in an enclosed airspace. This allow for an extended bass response.