MI-135 - Electric drill Omaha - Free user manual and instructions

Product Type	Demolition Hammer (Rotary Hammer)
Brand	Omaha
Model	MI-135
Dimensions (L x W x H)	400 x 100 x 200 mm
Weight	5.0 kg
Power Source	Electric corded
Rated Voltage	220-240 V, 50/60 Hz
Rated Power Input	1500 W
Impact Energy (EPTA)	20 J
No-Load Speed	1500 rpm
Impact Rate	3000 bpm
Chuck Type	SDS-plus
Max Drilling Diameter (Concrete)	30 mm
Max Drilling Diameter (Steel)	13 mm
Functions	Hammering only, hammer drilling, rotation stop for chiseling
Vibration Level	15 m/s² (typical)
Sound Pressure Level	90 dB(A)
Maintenance	Regularly check carbon brushes, clean air vents after use
Safety Precautions	Wear goggles, ear protection, and gloves; use auxiliary handle
Spare Parts	Chisel bits, carbon brushes, dust cup, side handle
Included Accessories	Carrying case, side handle, depth gauge, 1 chisel bit
Warranty	1 year limited warranty

Frequently Asked Questions - MI-135 Omaha

What is the Omaha MI-135 used for?

The Omaha MI-135 is a demolition hammer designed for heavy-duty tasks such as breaking concrete, chiseling, and light demolition work. It can also be used for drilling into concrete when equipped with appropriate bits.

What type of chuck does the MI-135 use?

The MI-135 uses an SDS-plus chuck, which allows for quick and secure bit changes without tools.

How do I change the chisel or bit on the Omaha MI-135?

First, ensure the tool is unplugged. Pull back the chuck sleeve, insert the bit until it clicks, then release the sleeve. To remove, pull back the sleeve and pull out the bit.

What safety equipment should I use with this tool?

Always wear safety goggles, ear protection, and heavy-duty gloves. Use the auxiliary side handle for better control, and consider a dust mask if working in dusty environments.

How do I maintain the Omaha MI-135?

After each use, clean the air vents with a soft brush. Check carbon brushes every 50-100 hours of use and replace if worn below 5 mm. Keep the tool dry and lubricate the SDS-plus shank occasionally.

Why does my MI-135 stop working suddenly?

Possible causes include a tripped circuit breaker, damaged power cord, worn carbon brushes, or overheating. Check the power supply, inspect the cord, and allow the tool to cool. If brushes are worn, replace them.

Can the MI-135 be used for drilling into wood or metal?

The primary function is hammering and chiseling. For drilling into wood or metal, a standard drill is recommended. However, with appropriate SDS-plus drill bits, you can drill into concrete and masonry.

What is the maximum drilling diameter in concrete?

The maximum recommended drilling diameter in concrete is 30 mm with a solid bit. For larger diameters, use a core bit with the tool in hammer-only mode.

How do I adjust the chisel position?

The MI-135 features a rotation stop function. Rotate the mode selector to the chisel position (symbol typically a hammer). Insert the chisel, rotate it by hand to the desired angle, then turn the mode selector to the locked position.

Where can I buy spare parts for the Omaha MI-135?

Spare parts such as carbon brushes, chisels, and side handles are available through authorized Omaha dealers or online retail platforms. Use only genuine parts to ensure safety and performance.

USER MANUAL MI-135 Omaha

CONTENIDOS

IMPORTA Y DISTRIBUYE: PGS Tools S.R.L

CUIT: 33-71121655-9