AU3659 - Blender AURORA - Free user manual and instructions

Product Type	Hand Blender
Brand	Aurora
Model	AU3659
Motor Block	Electric, with press-and-hold "On" button
Number of Speeds	1 (single speed when button held)
Attachments Included	Blender nozzle, whisk nozzle, mini chopper bowl with blade, grinding nozzle (reducer cover)
Blender Nozzle Use	Soups, purees, sauces, baby food, cocktails
Whisk Nozzle Use	Beating cream, biscuit dough, stirring desserts (not heavy dough)
Mini Chopper Use	Chopping greens, vegetables, cheese, nuts, dried fruits (not ice, coffee beans, hard foods)
Maximum Continuous Operation	30 seconds
Required Rest Time	At least 2 minutes
Maximum Product Temperature	40°C
Blade Material	Stainless steel (knife for grinding - sharp)
Cleaning Method	Motor block with damp cloth; attachments with warm soapy water, dry thoroughly
Dishwasher Safe	No (attachments should not be washed in dishwasher)
Storage	Dry, cool place, out of reach of children
Safety Precautions	Do not immerse motor; unplug when not in use; keep away from children under 8; do not use near water or outdoors
Overload Protection	User must respect max operation time; if blades jam, disconnect and clear manually
Intended Use	Household purposes only, not commercial

Frequently Asked Questions - AU3659 AURORA

Can I crush ice with this blender?

No, the Aurora AU3659 is not designed to crush ice, frozen foods, hard cheeses, coffee beans, or cereals. Attempting to process such items may damage the blades.

How long can I use the blender continuously?

You should not use the blender for more than 30 seconds at a time. After each use, allow the appliance to rest for at least 2 minutes to prevent overheating.

Can I wash the motor block in water?

No, never immerse the motor block or power cord in water or any liquid. Clean it only with a slightly damp cloth and then wipe dry.

What attachments are included with the AU3659?

The package includes a blender nozzle, a whisk nozzle, a mini chopper bowl with a sharp blade, and a grinding nozzle (reducer cover).

How do I use the mini chopper?

Place the chopping knife on the center pin of the bowl, load ingredients (pre-cut large items), attach the grinding head and then the motor unit until it locks. Press and hold the 'On' button to operate. Release to stop. Always handle the sharp knife by the top plastic part.

Can I blend hot liquids?

The maximum temperature of ingredients should not exceed 40°C. Do not process boiling or very hot liquids to avoid splashing and damage.

Is it safe for children to use?

Children under 8 years should not use or touch the appliance, power cord, or plug. Keep the appliance and its packaging away from children to avoid suffocation and injury.

What should I do if the blades jam?

Immediately disconnect the appliance from the mains. Wait for the blades to stop completely. Then carefully remove the ingredients that are blocking the rotation. Do not attempt to force the blades.

Can I use the whisk to mix heavy dough?

No, the whisk is intended only for light batters (e.g., biscuit dough), cream, and desserts. Do not use it for heavy dough like bread or pizza dough.

How should I clean the attachments?

Wash all nozzles and containers with warm soapy water and dry with a clean towel. Do not soak them for long. Do not use abrasive cleaners, scouring pads, or the dishwasher for cleaning.

USER MANUAL AU3659 AURORA

Product photo of Aurora brand blender, whisk, and cooking bowl (no text or symbols visible)

Electric

Hand Blender

Components identification

1. Power "On"
2. Motor block
3. Nozzle for grinding (Reducer cover)
4. Chopper bowl
5. Blade knife for grinding
6. Nozzle-blender
7. Nozzle-whisk

RUS

Please read this manual carefully before using the product to avoid damage during use. Before switching on the product, make sure that the technical specifications of the product shown on the label correspond to the parameters of the electric network. Incorrect use can lead to damage of the product, cause material damage or cause damage to the health of the user. Use only for household purposes in accordance with this Manual. The product is not intended for commercial use. Use the product only for its intended purpose. Do not use the product near the kitchen sink, outdoors and in rooms with high humidity. Always unplug the product from the electrical network when it is not in use, as well as before assembly, disassembly and cleaning. The product must not be unattended while it is connected to the electric network. Make sure that the power cord does not touch the sharp edges of furniture and hot surfaces. To avoid electric shock, do not attempt to disassemble or repair the product by yourself. When disconnecting the product from the electric network, do not pull on the power cord, hold the plug. Do not twist or wind the cord. The product is not designed to be operated by an external timer or a separate remote control system. The product is not intended for use by persons with reduced physical, sensory or mental abilities, or if they have no experience or knowledge, if they are not controlled or instructed about the use of the device by the person responsible for their safety. Do not allow children to use the product as a toy. Do not use accessories that are not included in the delivery suite. ATTENTION! Do not allow children to play with plastic bags or wrapping film. THREAT OF SUFFOCATION! ATTENTION! Do not use this product outdoors. ATTENTION! Be especially careful if children under 8 years or people with disabilities are close to the product in use. ATTENTION! Do not use this product near combustible materials, explosives, or self-igniting gases. Do not install this product near a gas or electric stove, or other heat sources. Do not expose the product to direct sunlight. ATTENTION! Do not allow children under 8 years to touch the body, the power cord and the plug of the power cord while the product is in operation. If the

PREPARATION FOR WORK

Unpack the product and remove any packing material. Wipe the case and all accessories carefully with a soft, slightly damp cloth. After that, wipe them dry.

WORK

NOZZLE-BLENDER

The blender nozzle is suitable for making soups, mashed potatoes, various sauces and gravy, as well as baby food, mixing various cocktails. Install the nozzle in the engine block and secure it. Make sure that the product is assembled properly. Connect the motor unit to the mains. To avoid splashing the mixture, before immersion, immerse the nozzle in products that need to be processed. To turn on the device, press and hold the "On" button. This mode of operation is suitable for mixing liquid products. When you press and hold the button, the product will operate at "On" speed. This mode of operation is suitable for the joint treatment of liquid and solid products.

NOZZLE-WHISK

Use a capping head only for beating the cream, making a biscuit dough or stirring the finished desserts. Install the nozzle in the engine block and secure it. Make sure that the product is assembled properly. Connect the motor unit to the mains. Place the products in the container before turning on the product. To turn on the device, press and hold the "On" button. This mode of operation is suitable for mixing liquid products. ATTENTION! Do not use a capping head to mix the dough. When you press and hold the "On" button, the product will operate at max speed.

CLEANING AND MAINTENANCE

Before cleaning, disconnect the product from the mains. Make sure the motor is fully stopped. To clean the engine block, use a slightly damp cloth, then wipe it dry. Wash all nozzles and containers with warm soapy water, then wipe dry with a clean towel. Do not soak the nozzles for long in the water. Do not use the dishwasher to clean the attachments. Do not use hard jaws, abrasive cleaners or solvents for cleaning.

STORAGE

Before storage, make sure that the product is disconnected from electric network. Complete all the requirements of the CLEANING AND MAINTENANCE section. Keep the product in a dry, cool place and out of the reach of children

product has been kept for a while at a temperature below 0°C, it must be left at room temperature for at least 2 hours before switching it on. When connecting the product to an electrical network do not use an adapter. ATTENTION! To avoid overloading the electric network, do not connect the product with other powerful electrical appliances to the same electric network. ATTENTION! The maximum temperature of the products for processing should not exceed 40°C. ATTENTION! To avoid overheating, do not use the product for more than 30 seconds, and always take a break for at least 2 minutes. ATTENTION! If it is difficult to rotate the knife-shredder, disconnect the appliance from the mains and only after that it is possible to extract the ingredients that interfere with the rotation of the knife. ATTENTION! Do not touch the motor housing, the power cord, or the power plug with wet hands. At the end of work, before removing the food and attachment from the bowl, disconnect the motor unit from the mains and wait until the motor stops completely. To avoid electric shock and fire, do not immerse the motor and power cord in water or other liquids and do not wash the motor part under running water. If this happens, immediately unplug the product from the mains and, before using it in the future, check the operation and safety of the product in an authorized service center. ATTENTION! Do not remove the nozzles during operation. In order not to damage the blades, do not process very hard foods such as cereals, rice, seasonings, coffee beans, ice, hard cheeses, frozen foods. If working with the nozzle is difficult, add a small amount of water. Before starting the grinding/mixing process, it is recommended to peel the fruit from the peel, remove inedible parts, bones, and cut the products in cubes about 1.5x1.5 cm in size. ATTENTION! Cutting blades are very sharp and are dangerous. Handle them with extreme caution! ATTENTION! Do not touch the rotating parts of the product. ATTENTION! For additional protection in the power circuit, it is advisable to install a residual current device with a rated operating current not exceeding 30 mA. To install the device, contact a specialist.

MINI-CHOPPER

ATTENTION! Install the chopper bowl on a dry, smooth and stable surface. The shredder is ideal for chopping greens, vegetables, cheese, most varieties of nuts, dried fruits. Large products, such as meat, soft cheeses, onions, carrots must be cut first. With nuts to remove the shell, the meat is separated from the bones and tendons. The shredder is not suitable for chipping ice, chopping very hard foods, such as coffee beans, nutmegs, cereals.

ATTENTION! The knife blade for grinding is very sharp! Hold on only the top plastic part! Place the chopping knife on the center pin of the bowl. Load the products into the bowl. Install the grinding head on the bowl until it locks. Insert the motor unit into the gearbox cover until it locks into place. Connect the product to the mains. To turn on the device, press and hold the "On" button. When you press and hold the "On" button, the product will operate at maximum speed. Release the product to turn it off. In the process of grinding with one hand, hold the motor unit, the other - the bowl for grinding. After use, first wait until the knives stop completely and disconnect the motor unit. Next, disconnect the gearbox from the bowl. Carefully remove the knife for grinding. Only after this, place the crushed products from the bowl.

МЕРЫ БЕЗОПАСНОСТИ

This symbol on the product and packaging means that used electrical and electronic products, as well as batteries, should not be disposed of with household waste. They need to be taken to specialized reception points. For more information on existing waste collection systems, contact your local authorities. Correct disposal will help to save valuable resources and prevent possible negative impact on human health and the state of the environment that may result from improper handling of waste.