99-8723B - Car kit Metra - Free user manual and instructions

Product Type	Car Installation Kit
Brand	Metra
Model	99-8723B
Compatible Vehicles	Mercedes-Benz ML 2006-2011
Kit Features	ISO DIN radio provision with pocket, ISO DDIN radio provision
Color	Matte Black
Components Included	Radio trim panel, Radio brackets, Pocket
Screws Included	8 x #8 x 3/8" Phillips screws
Tools Required	Panel removal tool, Phillips screwdriver, T-20 Torx driver
Wiring Harness	Sold separately (Metra/AXXESS recommended)
Antenna Adapter	Sold separately
Installation Difficulty	Moderate (dash disassembly required)
Tech Support	1-800-253-TECH (Metra)
Material	Plastic, Painted matte black
Approximate Dimensions	7 x 4 x 2 inches (kit assembly)
Weight	0.5 lb

Frequently Asked Questions - 99-8723B Metra

What vehicles is the Metra 99-8723B compatible with?

The Metra 99-8723B is designed for Mercedes-Benz ML model years 2006-2011.

Does this kit include a wiring harness?

No, the wiring harness and antenna adapter are sold separately. Metra recommends using the proper mating adapter from Metra or AXXESS.

What tools are needed for installation?

You will need a panel removal tool, Phillips screwdriver, and a T-20 Torx driver.

Can I install a double-DIN radio with this kit?

Yes, the kit supports both ISO DIN radio with pocket and ISO DDIN radio provisions.

Is the kit painted?

Yes, the trim panel is painted matte black to match most factory interiors.

What screws are included?

The kit includes 8 Phillips screws (size #8 x 3/8") for mounting brackets and pocket.

Do I need to remove the factory radio first?

Yes, you must remove the factory radio after disassembling the dash. See the instructions for dash disassembly.

What should I do if I have installation issues?

Call Metra Tech Support at 1-800-253-TECH. Have the vehicle apart and instructions ready before calling.

Does the kit include a pocket?

Yes, a pocket is included for use with ISO DIN radio installations.

Can I use this kit with a single-DIN radio?

Yes, the kit includes a pocket for single-DIN (ISO DIN) radio installation.

USER MANUAL 99-8723B Metra

Interior view of a car dashboard with steering wheel, air conditioner, and digital display (no visible text or symbols)

Mercedes-Benz ML 2006-2011

KIT FEATURES

• ISO DIN radio provision with pocket
• ISO DDIN radio provision
- Painted matte black

KIT COMPONENTS

- A) Radio trim panel - B) Radio brackets - C) Pocket - D) (8) #8 x 3/8" Phillips screws

Line drawing of a rectangular frame with a recessed top and inner square, no text or symbols present

Technical line drawing of two mechanical components with mounting holes and housing (no text or symbols)

Isometric line drawing of a rectangular electronic device with mounting holes and a red square marker (no text or symbols)

TABLE OF CONTENTS

Dash Disassembly 2

Kit Assembly

-ISO DIN radio provision with pocket ....3
-ISO DDIN radio provision ....3

WIRING & ANTENNA CONNECTIONS(sold separately)

Please visit metraonline.com for additional adapters and accessories.

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver
  • T-20 Torx driver

CAUTION! All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the on position, or while the vehicle is running.

DASH DISASSEMBLY

1. Unsnap and remove climate controls.
2. Remove (2) T-20 Torx screws from the radio retaining tabs.
3. Push straight down on the retaining tabs to release the factory radio.

Continue to Kit Assembly

Please visit Metraonline.com for Dash Disassembly illustrations.

KIT ASSEMBLY

ISO-DIN radio provision with pocket

1. Attach the dio brackets to the radio trim panel using (4) #8 x 3/8" Phillips screws supplied. (Figure A)
2. Attach the pocket to the bracket assembly using the (4) supplied #8 x 3/8" Phillips screws. (Figure B)
3. Remove the metal DIN sleeve and trim ring from the aftermarket radio.
4. Slide the radio into the completed assembly, and then secure it to the assembly using screws supplied with the radio. (Figure C)
5. Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or AXXESS. Test the radio for proper operation.
6. Reassemble the dash in reverse order of disassembly.

Technical line drawing of a mechanical housing or enclosure with mounting holes and internal components (no text or symbols)

(Figure A)

Technical line drawing of a mechanical bracket assembly (no text or symbols)

(Figure B)

Technical line drawing of a car air vent system with no visible text or symbols

(Figure C)

ISO-DDIN radio provision

1. Attach the radio brackets to the radio trim panel using (4) #8 x 3/8" Phillips screws supplied. (Figure A)
2. Slide the radio into the completed assembly, and then secure it to the assembly using screws supplied with the radio. (Figure B)
3. Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or AXXESS. Test the radio for proper operation.
4. Reassemble the dash in reverse order of disassembly.

Technical line drawing of a mechanical housing or panel assembly with mounting holes and internal components (no text or symbols)

(Figure A)

(Figure B)

IMPORTANT

If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by enrolling in the most recognized and respected

unshilling in the most recognized and resp mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps

toward a better tomorrow.

Metra recommends MECP certified technicians

Interior view of a car dashboard with air conditioners and a digital display (no visible text or symbols)

Black rectangular frame with a white inner square, no text or symbols visible.

Black rectangular electronic device with ventilation slots and a small logo (no visible text or symbols)

Two black plastic metal bracket components with cutouts and mounting holes (no text or symbols visible)

HARDWARE INCLUDED

Mercedes-Benz ML 2006-2011

D ISO DDIN radio provision

S ISO DIN radio provision with pocket

P Painted matte black

This kit provides the ability to install an ISO DIN radio with pocket, as well as an ISO DDIN aftermarket radio. Painted matte black.

KIT COMPONENTS

• Radio trim panel
• Radio brackets
• Pocket
  • (8) #8 x 3/8" Phillips screws

WIRING & ANTENNA CONNECTIONS

Please visit metraonline.com for additional adapters and accessories. (sold separately)

SALES 800-221-0932