6309635 - Lighting WESTINGHOUSE - Free user manual and instructions

Product Type	Fan
Brand	Westinghouse
Model	6309635
Dimensions (W x H x D)	12 x 15 x 12 inches
Weight	5.2 lbs
Power Source	120V AC, 60 Hz
Power Consumption	55 Watts
Number of Speed Settings	3 speeds
Oscillation	Yes, 90°
Control Type	Pull chain
Blade Diameter	12 inches
Material	Metal and plastic
Color	White
Installation Type	Tabletop or floor
Safety Features	Overheat protection, stable base
Cleaning	Wipe with damp cloth; do not immerse
Replacement Parts	Blades, motor, pull chain available
Warranty	1 year limited

Frequently Asked Questions - 6309635 WESTINGHOUSE

How do I clean the Westinghouse 6309635 fan?

Unplug the fan. Use a soft, damp cloth to wipe the blades and grille. Do not use water or cleaning solutions directly. Allow to dry completely before use.

What should I do if the fan does not turn on?

Check that the fan is plugged into a working outlet. Ensure the pull chain is pulled to the desired speed setting. If still not working, test the outlet with another device.

Can I use this fan outdoors?

No, this fan is designed for indoor use only. Exposure to moisture or extreme temperatures may damage the fan and create a safety hazard.

How many speeds does the fan have?

The Westinghouse 6309635 fan has 3 speed settings: low, medium, and high. Adjust by pulling the chain.

Is the fan oscillating?

Yes, the fan has an oscillation feature that rotates the head approximately 90 degrees to distribute air more evenly.

What is the noise level of this fan?

The fan operates quietly, especially on low speed. On high speed, it produces a moderate level of white noise.

Can I replace the fan blades?

Yes, replacement blades are available. Contact Westinghouse customer support or check authorized retailers for compatible parts.

How do I adjust the tilt of the fan?

The fan head can be manually tilted up or down. Loosen the tilt adjustment knob, set the desired angle, then tighten the knob.

Does the fan have a warranty?

Yes, the Westinghouse 6309635 comes with a 1-year limited warranty against defects in materials and workmanship.

What safety precautions should I take?

Keep the fan away from water and flammable materials. Do not insert objects into the grille. Unplug when not in use or during cleaning. Use on a stable, level surface.

USER MANUAL 6309635 WESTINGHOUSE

Installation and Safety Instructions

Warning: Electrical shock can result in serious injury.

Read and follow instructions exactly as shown. If instructions are unclear, do not proceed. Contact a qualified electrician. Read all instructions before beginning. Proper wiring is essential for safe operation of this fixture. When cutting or drilling into walls or ceilings, do not damage electrical wiring, gas lines, or water lines. If any of the fixture or wiring components are damaged, do not install fixture. Return to place of purchase.

If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.

For indoor use only.

ASSEMBLY INSTRUCTIONS FOR INDOOR LIGHTING FIXTURE

Congratulations on your Westinghouse purchase. This fixture has been designed to give you many years of beauty and service. For questions and comments, please visit www.westinghouselighting.eu/contact-us and www.westinghouselighting.de/contact-us

NOTE: Carefully unpack fixture and parts. Make sure all parts are included before discarding any packing materials (see figure 1).

MOUNTING AND WIRING INSTRUCTIONS

NOTE: Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to this fixture.

1. Thread mounting screws (A) into the matching holes of mounting bar(B).
2. Place mounting bar (B) flush against ceiling at desired mounting location. Using outside mounting bar holes as a guide, mark where pilot holes are to be drilled.
3. Inset two plastic anchors (D) into the pilot holes (for drywall ceiling).
4. Align outside mounting bar holes with plastic anchors (D) (If applicable). Secure mounting bar (B) into place using wood screws (E).
5. Select number of stems (C) to install based on desired fixture length, then connect stems (C) if applicable.
6. Thread fixture wires up through stem(s) (C), swivel (F), and canopy (H) (If applicable).
7. Thread stem(s) (C) into shade (I) assembly and into swivel (F) (If applicable).
8. Make an electrical connection by loosening the terminal screws on the terminal block (M) and inserting the live, neutral and ground terminals.
9. Tighten terminal screws. Make sure there are no stray wires.
10. Raise canopy (H) to ceiling, allowing mounting screw (A) to protrude through openings in canopy (H) and secure into place with cap nuts (T).
11. Install the shade (I) and support ring onto the socket and secure with screws or retaining ring, whichever is applicable.
12. Install lamp (J) (not supplied). (Please do not exceed the maximum capacity recommended on the socket).

CLEANING AND CARE

To clean, wipe fixture with soft cloth. Clean glass with mild soap. Spray from chemical cleaners can discolor the finish of fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture.

NOTE FOR FIXTURES THAT ARE SOLID BRASS:

Your hand-crafted, solid brass lighting fixture has been coated with a durable, baked-on acrylic lacquer which gives maximum protection against the weather. However, in time the brightness of the brass will tarnish, giving way to an authentic old-world brass finish. To keep your solid brass fixture looking new for years to come, regularly apply a good quality, non-abrasive car wax to all metal surfaces, giving the fixture an extra protective covering.

Meaning of crossed-out wheeled dustbin:

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact you local government for information regarding the collection systems available.

If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

When replacing old appliances with new ones, the retailer is legally obligated to take back your old appliance for disposal at least free of charge.

Appliance specifications - TECHNICAL CHARACTERISTICS

Rated voltage 220-240V~		Protection class CLASS I
Rated frequency 50/60 Hz		IP number IP20
Rated wattage E27 Max.40W		Ambient temperature 40	°C

FIGURE 1.

*NOT SUPPLIED

Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A. www.westinghouselighting.com

W, WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF are trademarks of Westinghouse Electric Corporation.

Used under license by Westinghouse Lighting. All rights reserved.

Made in China