SAS729PW18 - Cables for Computers and Peripherals StarTech.com - Free user manual and instructions

Product Type	SAS to SATA Cable with LP4 Power
Brand	StarTech.com
Model	SAS729PW18
Cable Length	18 in (457.3 mm)
Connector A	SATA (7 pin; Data) Receptacle
Connector B	1 - LP4 (4 pin; Molex Large Drive Power) Male; 1 - SFF-8482 (29 pin; Data & Power; Internal SAS) Receptacle
Color	Red
Weight	0.1 lb (0 kg)
Shipping Weight	0.1 lb (0 kg)
Warranty	Lifetime
Compliance	RoHS Compliant
Package Contents	1 - 18in SAS 29 Pin to SATA Cable with LP4 Power
Application	Connects SAS drives to SATA controllers with LP4 power; ideal for SAS storage, HBAs, RAID controllers
Compatibility Note	SATA controller must support SAS drives
Maintenance	Keep connectors clean and dry; avoid bending cable sharply
Safety	Use with compatible equipment only; disconnect power before installation
Spare Parts	Not applicable; cable is a single unit
General Information	High-quality cable backed by StarTech.com Lifetime Warranty

Frequently Asked Questions - SAS729PW18 StarTech.com

What is the StarTech.com SAS729PW18 cable used for?

It connects SAS (Serial Attached SCSI) drives to SATA controllers while providing LP4 power. Ideal for use with SAS external storage devices, Host Bus Adapters, and RAID controllers.

What connectors does the SAS729PW18 have?

It has a SATA (7-pin data) receptacle, an LP4 (4-pin Molex power) male connector, and an SFF-8482 (29-pin data and power) receptacle for internal SAS.

What is the cable length of the SAS729PW18?

The cable length is 18 inches (457.3 mm).

Is the SAS729PW18 compatible with SATA controllers?

Yes, but the SATA controller must support SAS drives. Please verify compatibility before use.

Does the SAS729PW18 come with a warranty?

Yes, it is backed by StarTech.com's Lifetime Warranty.

What is the weight of the SAS729PW18 cable?

The cable weighs approximately 0.1 lb (0 kg).

Is the SAS729PW18 RoHS compliant?

Yes, it is RoHS Compliant, meaning it meets environmental standards.

What color is the SAS729PW18 cable?

The cable is red.

How do I maintain the SAS729PW18 cable?

Keep connectors dust-free and dry. Avoid sharp bends or excessive force during installation to prevent damage.

Can I use the SAS729PW18 to power a hard drive?

The LP4 connector provides power, and the data is transferred via the SATA or SFF-8482 connector. It can be used to power and connect a SAS or SATA drive, depending on compatibility.

USER MANUAL SAS729PW18 StarTech.com

18in SAS 29 Pin to SATA Cable with LP4 Power

StarTech ID: SAS729PW18

Red and black cable with connector, no visible text or symbols

Ideal for use with SAS external storage devices, Host Bus Adapters and RAID controllers, this high quality 18in SAS (29-Pin) to SATA Cable delivers both power (LP4) and data connectivity.

This high quality SAS-SATA cable is backed by StarTech.com's Lifetime Warranty.

*Please note that the SATA controller must support SAS drives.

Technical Specifications

Warranty Lifetime

Connector A 1 - SATA (7 pin; Data) Receptacle

Connector B 1 - LP4 (4 pin; Molex Large Drive Power) Male

Connector B 1 - SFF-8482 (29 pin; Data & Power; Internal SAS) Receptacle

Color Red

Cable Length 18 in [457.3 mm]

Product Weight 0.1 lb [0 kg]

Shipping (Package) Weight 0.1 lb [0 kg]

Included in Package 1 - 18in SAS 29 Pin to SATA Cable with LP4 Power

Certifications, Reports and Compatibility

RoHS Compliant

Available