TRM5000 - Water heater Profilo - Free user manual and instructions

Brand	Profilo
Model	TRM5000
Product Type	Electric Storage Water Heater
Energy Efficiency Class	A+
Capacity	50 L
Rated Power	2000 W
Rated Voltage	220-240 V ~ 50 Hz
Water Connection	G 1/2"
Maximum Water Pressure	8 bar
Temperature Range	35°C - 75°C
Heating Time	Approx. 2.5 hours (ΔT 50°C)
Dimensions (H x W x D)	850 x 450 x 450 mm
Weight (empty)	18 kg
Material	Steel with enamel coating
Insulation	Polyurethane foam
Anode	Magnesium anode
Safety Features	Overheat protection, pressure relief valve, thermal cut-off
Installation Type	Wall-mounted, vertical
Maintenance	Annual descaling and anode inspection
Warranty	2 years

Frequently Asked Questions - TRM5000 Profilo

How do I install the Profilo TRM5000 water heater?

Installation must be carried out by a qualified professional. Ensure the wall can support the weight, and connect to water supply and power following local regulations. Refer to the manual for detailed steps.

What is the recommended temperature setting for energy savings?

Setting the thermostat to 55°C is often a good balance between energy efficiency and preventing bacterial growth. Higher temperatures increase energy consumption.

How often should I descale the water heater?

Descaling is recommended every 6-12 months, depending on water hardness. Use a descaling solution suitable for enamel tanks.

Why is my water heater leaking from the pressure relief valve?

A small amount of water dripping during heating is normal. If it leaks continuously, the valve may be faulty or the water pressure is too high. Check the pressure and replace the valve if necessary.

What does the magnesium anode do and when should it be replaced?

The magnesium anode protects the tank from corrosion. It should be inspected annually and replaced when it is worn down to less than 10 mm or every 2-3 years.

Can I use an extension cord for the power supply?

No, the water heater must be connected directly to a dedicated circuit with proper grounding. Extension cords can overheat and cause fire hazards.

How long does it take to heat a full tank?

Heating from cold to 65°C takes approximately 2.5 hours for a 50 L tank, depending on the incoming water temperature.

What should I do if the water heater produces no hot water?

First, check the power supply and circuit breaker. Then, ensure the thermostat is set correctly. If it still doesn't work, the heating element or thermostat may need replacement.

Is the TRM5000 suitable for hard water areas?

Yes, but regular descaling is essential to maintain efficiency and prolong lifespan. Consider installing a water softener if the water is very hard.

What is the energy consumption of the TRM5000?

The annual energy consumption is estimated at ~1500 kWh for average use, depending on settings and usage habits. The energy class A+ indicates efficient operation.

USER MANUAL TRM5000 Profilo

Blue flag with a circle of twelve yellow stars, representing the European Union (no text or symbols beyond the stars)

ENERG

енергия · ενεργεια

PROFiLO

TRM5000

A+

A

B

C

D

E

F

dB

kWh/yil