SSB287 - Projector Accessories Chief - Free user manual and instructions

Brand	Chief
Model	SSB287 (also SSM287, SLB287, SLM287)
Product Type	Interface Bracket
Compatible Mounts	Chief Series Projector Mounts
Compatible Bracket Styles	SSB, SLB (thumb nuts required)
Included Hardware	(1) Interface Bracket, (6) M4 x 10mm Phillips Pan Head Screws, (6) 10-24 Thumb Nuts (for SLB/SSB), (6) M4 Washers, (1) All-Points Security Kit, (1) 5/32" Security Hex Key
Mounting Screws (Projector Side)	M4 x 10mm with M4 flat washers
Thumb Screws (for SLB/SSB)	10-24 x 5/8" Phillips pan head with thumb nuts
Orientation Indicator	Triangle on bracket points towards front of projector
Security Upgrade	All-Points Security Kit provides security screws
Material	Metal (steel, typical)
Color	Black (typical, not specified)
Weight	Approx. 0.5 kg (estimated)
Dimensions (Bracket)	Custom fit for projector base (not specified)
Installation Method	Reverse projector on flat surface, align bracket, secure with included screws
Safety Note	Use only supplied hardware; do not overtighten
Manufacturer	Chief Manufacturing, Milestone AV Technologies
Part Number	8802-002093 Rev00

Frequently Asked Questions - SSB287 Chief

What is the Chief SSB287 Interface Bracket used for?

The Chief SSB287 is an interface bracket designed to attach a projector to a Chief Series projector mount.

Which mounts are compatible with the SSB287 bracket?

The SSB287 is compatible with Chief Series Projector Mounts. Always refer to the mount's installation instructions for specific compatibility.

What hardware is included in the package?

The package includes: (1) interface bracket, (6) M4 x 10mm Phillips pan head screws, (6) 10-24 thumb nuts (for SLB/SSB brackets), (6) M4 flat washers, (1) All-Points Security Kit, and (1) 5/32' security hex key.

How do I install the SSB287 bracket on a projector?

Turn the projector upside down on a flat surface. Align the bracket's mounting holes with the threaded inserts on the projector, ensuring the triangle points toward the front. Secure using the M4 screws and washers. For SLB/SSB brackets, thumb nuts are required on the 10-24 screws.

Can I use different screws than those provided?

No. Use only the hardware supplied by the manufacturer. Substituting hardware can lead to equipment falling and cause personal injury.

What is the All-Points Security Kit?

The All-Points Security Kit includes security screws that can be used instead of the standard screws to mount the bracket, providing extra theft deterrence.

How do I ensure the bracket is oriented correctly?

Locate the triangle on the bracket. It must point toward the front of the projector for proper alignment.

What should I avoid during installation?

Avoid overtightening screws, as it can damage parts and lead to serious injury or equipment damage. Ensure all screws are snug but not over-torqued.

Is the SSB287 compatible with any projector model?

No. The bracket fits projectors with the correct threaded insert pattern on the bottom. Verify the mounting hole spacing matches the bracket holes before installation.

Where can I find additional installation information?

Refer to the installation instructions provided with your specific Chief Series Projector Mount for additional details. The manual for the mount contains more comprehensive guidance.

USER MANUAL SSB287 Chief

INSTALLATION INSTRUCTIONS

SSB-287, SSM-287, SLB-287 and SLM-287 Interface Brackets

SSB-287, SSM-287, SLB-287 and SLM-287 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

(1) Interface Bracket (6) Screw, Phillips Pan Head, Machine, M4 x 10mm
(6) 10-24 Thumb Nuts ** (6) Washer, M4
(1) All-Points Security Kit (1) 5/32" Security Hex Key

Technical diagram of a metal plate with bolt holes and red dashed circular features, showing a downward arrow (no text or symbols)

Towards front of projector
SLB-287
Note: SSB-style interface bracket connections are circled.

SLM-287
Note: SSM-style interface bracket connections are circled.

**Only used when installing SLB/SSB interface brackets.

NOTE: Specific to SSB-style and SSM-style interface bracket installation: All appropriate screws come pre-installed in the circled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style interface bracket installation.

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface brackets.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.
2. Turn projector upside down on a flat surface.
3. Place the interface bracket onto the bottom of the projector, aligning the mounting holes in the bracket with the threaded inserts in the bottom of the projector and ensuring that triangle in bracket points towards front of projector.
4. Position M4 x 10mm mounting screws with M4 flat washers into the threaded inserts and bracket side tabs. Tighten all fasteners at this time, securing the bracket to the projector.

NOTE: Security screws can be substituted when mounting Interface bracket to projector by using the parts and installation instructions in the All-Points Security Kit.

Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

CHIEF®

Our Mounts. Your Vision.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8802-002093 Rev00

©2011 Milestone AV Technologies,

a Duchossois Group Company

05/11