WG2520 - Subwoofer CLARION - Free user manual and instructions

Product Type	Car Audio Subwoofer
Brand	Clarion
Model	WG2520
Driver Size	10 inches (25 cm)
Power Handling (RMS)	200 Watts
Power Handling (Peak)	400 Watts
Impedance	4 ohms (single voice coil)
Sensitivity	90 dB (1W/1m)
Frequency Response	30 Hz - 500 Hz
Recommended Enclosure (Sealed)	0.6 - 0.8 cubic feet
Recommended Enclosure (Ported)	1.0 - 1.2 cubic feet
Mounting Depth	5.5 inches (140 mm)
Mounting Hole Diameter	9.1 inches (231 mm)
Weight	8.5 lbs (3.9 kg)
Cone Material	Polypropylene with rubber surround
Magnet Type	Ferrite
Terminal Type	Spring-loaded push terminals
Warranty	1 year limited
Maintenance	Wipe with a dry cloth; avoid moisture
Safety	Ensure secure mounting to prevent movement
Spare Parts	Contact Clarion authorized service centers
Repairability	Replaceable cone and voice coil (by professional)
Additional Features	Compatible with most car stereo systems

Frequently Asked Questions - WG2520 CLARION

What is the power handling of the Clarion WG2520 subwoofer?

The Clarion WG2520 has a RMS power handling of 200 Watts and a peak power handling of 400 Watts.

What is the impedance of the WG2520?

The subwoofer has a single 4 ohm voice coil.

What size enclosure is recommended for the WG2520?

For a sealed enclosure, use 0.6-0.8 ft³. For a ported enclosure, use 1.0-1.2 ft³ with a tuning frequency around 35 Hz.

How do I connect the WG2520 to my amplifier?

Connect the subwoofer's positive terminal to the amplifier's positive output and the negative terminal to the negative output. Ensure the amplifier's impedance is compatible (4 ohms).

What is the mounting depth of the WG2520?

The mounting depth is 5.5 inches (140 mm). Make sure your enclosure is deep enough.

Does the WG2520 require a break-in period?

Yes, it is recommended to play the subwoofer at low to moderate volume for about 20 hours to loosen the suspension and improve performance.

Can I use the WG2520 in a sealed or ported enclosure?

The subwoofer works well in both sealed and ported enclosures. Sealed gives tighter bass, ported gives louder output.

What is the frequency response of the WG2520?

The frequency response ranges from 30 Hz to 500 Hz, suitable for deep sub-bass.

How do I clean and maintain the WG2520?

Wipe the subwoofer with a dry soft cloth. Avoid any liquids or cleaning agents that could damage the cone or surround.

Where can I find replacement parts for the WG2520?

Contact Clarion authorized service centers for genuine replacement parts. Do not attempt repairs yourself.

USER MANUAL WG2520 CLARION

10 Inch Dual Voice Coil Subwoofer (4Ω) + (4Ω)

WG3020

12 Inch Single Voice Coil Subwoofer (4Ω)

WG3020D

12 Inch Dual Voice Coil Subwoofer (4Ω) + (4Ω)

WG2520
WG2520D

WG3020
WG3020D

WG Subwoofer

Owner's & Installation manual

Option 2 Two Vector Application (Parallel) (NG28207WGJ020)

202 (Parallel) Configuration

Option 3 Two Vector Application (Series) (WG2520/WG3020)

802 (Series) Configuration

Dual Voice Coil Wiring Guide

Option 1 One Wooler Application (Parallel) (WG2520D/WG3020D) (1) Dual 4Ω + 4Ω

Qaton 2 One Wucher Application (Series) (WG2520D/WG3020D) (1) Dual 4Ω + 4Ω

Option 4 Two Wouter Application (Series-Parallel) (WG2520D/WG3020D)