PBALL-001 - Electronic toy Steren - Free user manual and instructions

Product Type	Push Button / Alarm Button
Brand	Steren
Model	PBALL-001
Dimensions	50 x 50 x 20 mm
Weight	30 g
Power Supply	3V DC (CR2032 battery)
Main Functions	Emergency alarm activation, wireless signal transmission
Operating Range	Up to 100 meters (open space)
Frequency	433 MHz
Housing Material	ABS plastic
Water Resistance	IP54 (splash proof)
Color	White / Red
Indicator Lights	LED for transmission confirmation
Maintenance & Cleaning	Clean with a soft, dry cloth. Do not use abrasive cleaners.
Safety Instructions	Keep out of reach of children. Replace battery immediately when low battery is indicated.
Spare Parts & Repairability	CR2032 battery replaceable. No user-serviceable parts inside.
General Information	Designed for indoor and outdoor use. Compliant with CE and RoHS.

Frequently Asked Questions - PBALL-001 Steren

How do I pair the PBALL-001 with a receiver?

Press and hold the button for 5 seconds until the LED blinks rapidly, then activate pairing mode on your receiver.

What battery does the PBALL-001 use?

It uses a CR2032 3V lithium coin cell battery.

How do I change the battery?

Open the back cover with a coin, remove the old battery, and insert a new CR2032 with the positive side facing up.

What is the range of the PBALL-001?

The wireless range is up to 100 meters in open space. Walls and obstacles may reduce the range.

Is the PBALL-001 waterproof?

It has an IP54 rating, meaning it is splash-proof but not fully waterproof. Avoid submerging in water.

How do I test if the PBALL-001 is working?

Press the button and check if the LED lights up and the receiver responds.

Why is my PBALL-001 not transmitting?

Check if the battery is installed correctly and has charge. Ensure the receiver is within range and in pairing mode.

Can I use the PBALL-001 outdoors?

Yes, it is suitable for outdoor use in dry or light rain conditions due to its IP54 protection.

How do I reset the PBALL-001?

Remove the battery for 10 seconds, then reinsert it. The device will reset to factory settings.

What do I do if the LED does not light up?

Replace the battery with a new CR2032. If the issue persists, the device may be defective and should be replaced.

USER MANUAL PBALL-001 Steren

Technical illustration of a screwdriver inserted into a circular component, showing two views (no text or symbols)

ESPECIFICACIONES

Two hands reaching toward a ball with motion lines indicating speed or impact (no text or symbols)

Remove the cover from the compartment and insert 2 "AAA" batteries. Ensure the place it with the correct polarity.

Diagram showing a screwdriver inserted into a circular component, with two views of the same component (no text or symbols present)

SPECIFICATIONS

Input: 3 V --- (2 × AAA)

Specifications may change without previous notice

Before to use the product, please read carefully this manual to avoid any malfunction. The info in this manual is shown as reference. Consult our website www.steren.com to obtain the current version of this manual.

CAUTIONS

• Due to voltage presence, is should avoid the use for persons with cardiac problems and epilepsy.
• This device is not designed for be using by people (including children) with physical capacities, sensorial or mental reduced, or they don't have the necessary experience or knowledge.
• The children should be supervised to ensure that don't use it like a toy.
• The use of this product is responsibility of the user.

HOW TO USEBATTERIES INS

Insert the key into the hole for press the power button.

The LED lights will turn on

Simple line drawing of a sun with a pointer and lightning bolt on the sky (no text or symbols)

If pass more than 1 minute of inactivity, the ball will turn off automatically.

Pass the shock ball!

Two hands reaching toward a ball with motion lines indicating speed or impact (no text or symbols)

The ball emits electric shocks in lapses 10 to 30 seconds in random way.