Metra TE-GTGC - Dashboard camera

TE-GTGC - Dashboard camera Metra - Free user manual and instructions

Find the device manual for free TE-GTGC Metra in PDF.

📄 1 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Metra TE-GTGC - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Dashboard Camera
Brand Metra
Model TE-GTGC
Dimensions Approx. 5 x 4 x 2 cm
Weight Approx. 50 g
Power Supply USB 5V DC
Built-in Battery Lithium polymer rechargeable
Storage Media microSD card (up to 32 GB, Class 10)
Video Resolution 1080p Full HD (1920x1080)
Field of View 120°
Night Vision IR LEDs
Loop Recording Yes (2/3/5 minute clips)
G-Sensor Yes, automatic event locking
Parking Mode Motion detection
Display 2.0 inch TFT LCD
Mount Suction cup
Language Support English, French, German, Spanish, etc.
Operating Temperature -10°C to 60°C
Certifications CE, FCC
Cleaning Wipe gently with a dry microfiber cloth

Frequently Asked Questions - TE-GTGC Metra

How to insert a memory card?
Make sure the device is off. Insert a microSD card (Class 10, up to 32 GB) into the slot with the gold contacts facing up until it clicks.
How to turn on the dashcam?
Press and hold the Power button for about 3 seconds until the display lights up. The device will start recording automatically if a memory card is inserted.
How to loop recording work?
The camera records in short clips (2/3/5 minutes). When the card is full, the oldest unlocked clip is overwritten automatically. Locked clips (e.g., by G-sensor) are protected.
How to enable parking mode?
Connect the camera to a constant power source (e.g., fuse box). Parking mode activates automatically when motion is detected while the vehicle is off.
How to view recorded videos?
Remove the microSD card and insert into a computer, or connect the camera via USB in mass storage mode. Videos are saved in the 'DCIM' folder.
Does the camera have night vision?
Yes, it has built-in IR LEDs that automatically activate in low light to provide clear black-and-white footage.
How to reset the camera?
Use a pin or paperclip to press the Reset hole located on the side or bottom for 5 seconds. This restores default settings.
What power source is recommended?
Use the included USB car charger (5V/1A). Avoid using USB ports on car radios as they may not provide stable power.
How to clean the lens?
Gently wipe the lens with a soft, dry microfiber cloth. Avoid using liquids or abrasive materials to prevent scratches.
Is the device waterproof?
No, the Metra TE-GTGC is not waterproof. It should be kept inside the vehicle and protected from direct rain or moisture.

User questions about TE-GTGC Metra

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Dashboard camera in PDF format for free! Find your manual TE-GTGC - Metra and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TE-GTGC by Metra.

USER MANUAL TE-GTGC Metra

TE-GTGC/TE-GTGCC (CMOS)

CHEVY SILVERADO & GMC SIERRA 1500 (2007-2013) CHEVY SILVERADO & GMC SIERRA 2500/3500 (2007-2014)

Replacement Tailgate Handle with Camera

Removal and Installation Instructions

Tools Needed: 13mm wrench/13mm socket and ratchet

  1. Start by lowering the tailgate. Stand and face the back end of the truck you will see three bolts, remove the two bolts that are side by side directly in front of you. Those bolts secure the tailgate handle to the tailgate.
  2. Now close tailgate, carefully lift the factory tailgate handle out and away from the tailgate.
  3. Now that the handle is out of the tailgate, you will have to swap the locking mechanism out of the old handle to the new one.
  4. Route the backup camera's wires through the tailgate handle's opening and through the tailgate itself.

NOTE: Avoid pinch points and things that can damage wires and their functions.

  1. Remove taillight and splice the red camera wire into the reverse light's 12v positive wire this will trigger the camera to turn on when vehicle is placed in reverse. Attach the black ground wire to a metal non-painted surface.
  2. Wires can now be fully routed from the tailgate to the cab of the truck and to a video source. Red

wire goes to the rear camera input trigger wire on your video source, plug RCA to your video screen input

NOTE: Test to make sure video is working before securing new handle.

  1. Carefully replace new tailgate handle in tailgate and secure the handle using the two bolts that were previously removed.

NOTE: If desired parking lines can be removed by attaching the green wires together.

iBEAM VEHICLE SAFETY SYSTEMS

1.800.221.0932

www.iBeamUSA.com

460 Walker Street, Holly Hill, FL 32117

SensorCMOS 1⁄4 sensor
Resolution400 TV Lines
Field of viewDiagonal 185°, Horizontal 150°, Vertical 110°
Illumination.01 Lux
IP ratingIP69
Parking LinesDefeatable
Extension cable26'
TV systemNTSC
Working Temp-20°C ~ 70°C
Warranty3 years
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Metra

Model : TE-GTGC

Category : Dashboard camera